4G SIM7600CE GSM GPRS SMS WCDMA EDGE CDMA LTE 900/1800MHz UART Shield Development Board
$184.38
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Power supply:Single supply voltage 3.4~4.2V
Power saving:Current in sleep mode
Radio frequency bands:Please refer to the table 1
Transmitting power:GSM/GPRS power class
–EGSM900:4 (2W)
–DCS1800:1 (1W)
EDGE power class
–EGSM900:E2 (0.5W)
–DCS1800:E1 (0.4W)
CDMA 1X power class:3 (0.25W) UMTS power class
–WCDMA:3 (0.25W)
–EVDO:3 (0.25W)
–TD-SCDMA:2 (0.25W)
LTE power class:3 (0.25W)
Data Transmission Throughput:GPRS multi-slot class 12 EDGE multi-slot class 12
UMTS R99 speed:384 kbps DL/UL HSPA+:5.76 Mbps(UL), 42 Mbps(DL)
TD-HSDPA/HSUPA:2.2 Mbps(UL), 2.8 Mbps(DL) CDMA EVDO:Rev-0,Rev-A, Rev-B
LTE CAT 4:150 Mbps (DL)
LTE CAT 4:50 Mbps (UL)
Antenna:GSM/UMTS/LTE main antenna.
UMTS/LTE auxiliary antenna
GNSS antenna
GNSS:GNSS engine (GPS,GLONASS and BD)
Protocol:NMEA
SMS:MT, MO, CB, Text and PDU mode
SMS storage:USIM card or ME(default)
Transmission of SMS alternatively over CS or PS.
USIM interface:Support identity card:1.8V/ 3V
USIM application toolkit:Support SAT class 3, GSM 11.14 Release 98
Support USAT
Phonebook management:Support phonebook types:DC,MC,RC,SM,ME,FD,ON,LD,EN
Audio feature:Support PCM interface
Only support PCM master mode and short frame sync, 16-bit linear data formats
UART interface:A full modem serial port by default
Baud rate:300bps to 4Mbps(default:115200bps)
Autobauding baud rate:9600,19200,38400,57600,115200bps
Can be used as the AT commands or data stream channel
Support RTS/CTS hardware handshake
Multiplex ability according to GSM 07.10 Multiplexer Protocol
MMC/SD:Support MMC and SD cards with 2.95 V on SD port
SDIO:Support SDIO with 1.8 V only on SDIO port
USB:USB 2.0 high speed interface
Firmware upgrade:Firmware upgrade over USB interface
Physical characteristics:Size:30 x 30 x 2.9m
Weight:5.7 g
Temperature range:Normal operation temperature:-30°C to +80°C
Extended operation temperature:-40°C to +85°C
Storage temperature -45°C to +90°C
Note
Module is able to make and receive voice calls, data calls, SMS and make GPRS/UMTS/HSPA+/LTE traffic in -40→ ~ +85→. The performance will be reduced slightly from the 3GPP specifications if the temperature is outside the normal operating temperature range and still within the extreme operating temperature range.
and manual:>>>>>>>>http://files.hobbyant.com/2018/08/UNV-SIM7600CE-EN-V1.1.zip
Package includes
1 x 4G SIM7600CE
Weight | 0.165 kg |
---|
Customers Also Viewed
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire Connectors
$70.86ConnectorsAdd to cartSpecificationModel:SC6-6~SC35-10Material:Tin Plated CopperColor:SilverSize:6mm²/10mm²/16mm²/25mm²/35mm²Mount Hole:6 mm/8 mm/10 mmBox Size(L*W*H):280 x 126 x 14 mmQuantity:100 PcsFeaturesElectro-plated tin exterior.Premium quality copper material, environmentally friendly, safe for using.These tube lugs have a bell shaped end allowing for easy insertion of the cable.Acceptable working temperature is -55℃ to 100℃ and are suitable for applications in the Australian Climate.Copper lugs are …
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire ConnectorsRead More
TDA7377 Subwoofer Amplifier Audio Board 38Wx3 Mini Home Amp 2.1 Channel HiFi Stereo Power Amplifier DIY
$21.86Amplifier BoardAdd to cartDescriptionThe power amplifier board uses 7377 amplifier chip, dual circuit design, optional DC12V / AC12V power supply, and uses 2.1 three-channel output. Available for Bluetooth / Wireless Microphone / Fan. Separate design, easy installation, provides volume and subwoofer adjustment. ParametersWorking voltage:DC12V / AC12V Chip:TDA7377 Op amp:LT084 / 324 Working voltage:DC12V / AC12V Output power:38Wx3 Channel …
XH-W1411 220V 10A Smart Electronics LED Digital thermometer Temperature Controller Switch Module
$17.48Test & Measuring ModuleAdd to cartSpecificationsTemperature range:-55- + 120→Temperature measurement accuracy:± 0.3→Resolution:0.1→Temperature range:-19 ~ 99→Control accuracy:1→Temperature probe:NTC10K / B3950 comes standard with 1 meter waterproof probeSupply voltage:220VTemperature:-25 ~ 55→ Humidity 20% -85% (non-condensing)Output Type:10A relay outputsSize:90*60mm/3.54 Inch*2.36 InchHole size:70*50mm/2.76 Inch*1.96 InchFeatures– The board and plastic panels fixed column compartment and lock nut– Connect the power supply according to the drawings …
3Pcs HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
$24.99DIY Electronic KitsAdd to cartDescriptionIt is DIY Kit, must be assemble to work. User need technical operation ability.Package included3 x HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpa
$60.74Carbon FiberAdd to cartSpecificationSize;100 x 100cmWidth; 0.25mmMaterial:Carbon fiberCompressive strength:3900 mpaFeaturesa.Uniform texture, without color. Weaving skills, good gloss.b.Mainly used in aircraft main, tail and body; automotive engine synchronizer, hood, bumpers, decorative pieces; bike frame, wheels, leading; racket, cone; kayaking, snowboarding; various models, helmets , watches, pens, bags.Main purpose1. Aerospace:fuselage, rudder, rocket engine shells, missiles casual flow, such as solar …
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpaRead More
3pcs EQKIT 60 Seconds Electronic Timer Kit DIY Parts Soldering Practice Board
$28.54DIY Electronic KitsAdd to cartInstruction:http://img.staticbg.com/file/products/20180726215941ETI-60-timer-kit.pdfFeatureOperating voltage:DC5VStandby current:≤8mAWorking current:≤10mACountdown:60 secondsCountdown ends prompt:three alarmsSoludering difficulty:GeneralBoard size:84 x 84mmNote:Electronic production kit, require buyer soldering assembly.Package included3 x Electronic Timer K
Reviews
There are no reviews yet.