4G SIM7600CE GSM GPRS SMS WCDMA EDGE CDMA LTE 900/1800MHz UART Shield Development Board
$184.38
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Power supply:Single supply voltage 3.4~4.2V
Power saving:Current in sleep mode
Radio frequency bands:Please refer to the table 1
Transmitting power:GSM/GPRS power class
–EGSM900:4 (2W)
–DCS1800:1 (1W)
EDGE power class
–EGSM900:E2 (0.5W)
–DCS1800:E1 (0.4W)
CDMA 1X power class:3 (0.25W) UMTS power class
–WCDMA:3 (0.25W)
–EVDO:3 (0.25W)
–TD-SCDMA:2 (0.25W)
LTE power class:3 (0.25W)
Data Transmission Throughput:GPRS multi-slot class 12 EDGE multi-slot class 12
UMTS R99 speed:384 kbps DL/UL HSPA+:5.76 Mbps(UL), 42 Mbps(DL)
TD-HSDPA/HSUPA:2.2 Mbps(UL), 2.8 Mbps(DL) CDMA EVDO:Rev-0,Rev-A, Rev-B
LTE CAT 4:150 Mbps (DL)
LTE CAT 4:50 Mbps (UL)
Antenna:GSM/UMTS/LTE main antenna.
UMTS/LTE auxiliary antenna
GNSS antenna
GNSS:GNSS engine (GPS,GLONASS and BD)
Protocol:NMEA
SMS:MT, MO, CB, Text and PDU mode
SMS storage:USIM card or ME(default)
Transmission of SMS alternatively over CS or PS.
USIM interface:Support identity card:1.8V/ 3V
USIM application toolkit:Support SAT class 3, GSM 11.14 Release 98
Support USAT
Phonebook management:Support phonebook types:DC,MC,RC,SM,ME,FD,ON,LD,EN
Audio feature:Support PCM interface
Only support PCM master mode and short frame sync, 16-bit linear data formats
UART interface:A full modem serial port by default
Baud rate:300bps to 4Mbps(default:115200bps)
Autobauding baud rate:9600,19200,38400,57600,115200bps
Can be used as the AT commands or data stream channel
Support RTS/CTS hardware handshake
Multiplex ability according to GSM 07.10 Multiplexer Protocol
MMC/SD:Support MMC and SD cards with 2.95 V on SD port
SDIO:Support SDIO with 1.8 V only on SDIO port
USB:USB 2.0 high speed interface
Firmware upgrade:Firmware upgrade over USB interface
Physical characteristics:Size:30 x 30 x 2.9m
Weight:5.7 g
Temperature range:Normal operation temperature:-30°C to +80°C
Extended operation temperature:-40°C to +85°C
Storage temperature -45°C to +90°C
Note
Module is able to make and receive voice calls, data calls, SMS and make GPRS/UMTS/HSPA+/LTE traffic in -40→ ~ +85→. The performance will be reduced slightly from the 3GPP specifications if the temperature is outside the normal operating temperature range and still within the extreme operating temperature range.
and manual:>>>>>>>>http://files.hobbyant.com/2018/08/UNV-SIM7600CE-EN-V1.1.zip
Package includes
1 x 4G SIM7600CE
Weight | 0.165 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.