5pcs 2.4G DL-LN33 Wireless Networking Board UART Serial Port Module CC2530
$56.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Num.:Parameter:Parameter value
1:Product number:DL-LN33
2:Chip selection:CC2530
3:Working frequency:2400~2450MHz (16 channels total)
4:Communication Interface:UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000)
5:Self-organizing network hops
6:Single hop transmission distance:70 meters (out of the air, no occlusion test)
7:Number of points that can be accommodated:The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96.
8:MAX packet length:63Byte (including port address information)
9:Transmission capacity:The transmission rate is higher when only one node sends data
Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency.
2400 Bit/s when each package contains 3 bytes of data.
10KBit/s when each package contains 30 bytes of data.
13:MAX send rate:250KBit/s
14:Packet retransmission times:Up to 15 times, at least 5 times when the network load is high
15:Air delay:Single-hop between nodes, less than 10mS
16:Transmit power:4. 5dBm
17:Operating Voltage:2. 5V~3. 6V
18:Working current:Less than 30mA
19:Antenna interface:PCB antenna
Pin Descriptions
Pin name:Pin position:Significance
NoUsed:1, 2,10,11,13:Not used, please keep it empty (empty refers to not connected to any circuit)
TestMode:3:Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it.
TestTx:4:Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
TestRx:5:Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
Gnd:6, 9,16:Ground
Vcc:7,8:Power supply
BaudReset:12:If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate.
Tx:14:Uart output of the module
Rx:15:Uart input of the module
Package includes
5 x Wireless Networking Board
Weight | 0.03 kg |
---|
Customers Also Viewed
50pcs 3296W 50 ohm Trimpot Trimmer Potentiometer
$13.20Electronic Accessories & SuppliesAdd to cartSpecificationResistance:50 ohmPower (Watts):0.5W, 1/2W Tolerance:±10% Temperature Coefficient:±100ppm/°C Number of Turns:25 Adjustment Type:Top Adjustment Resistive Material:Cermet Mounting Type:Through Hole Termination Style:PC Pins Size / Dimension:9.53 x 4.83 x 10.03mmPackage included50 x Potentiometer
3pcs DC-DC 3V-35V To 4V-40V Step Up Power Module Adjustable Boost Converter Adjustable Voltage Board
$60.09Power Supply ModuleAdd to cartDescriptionInput Voltage:DC 3V-35VOutput Voltage:DC 4V-40V (continuously adjustable)Efficiency:94%(MAX)Size:L37mm*W32mm*H15mmWorking Temperature:-40-+85 degreesLoad capacity:Max 80WThe way of Connection:the connection terminal does not need to be soldered, the inchINinch is the input, and the inchOUTinch is the output.NoteWhen the output voltage is closer to the output voltage,the carrying capacity is higher,and the efficiency is also higher.Measurement reference tableInput voltage:Output voltage:Maximum …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mm
$28.42Power Supply ModuleAdd to cartParameterModel:S-120-12AC input voltage range:220VACInput current:0.5A/230VAC impulse current:Cold-start current 9A/230VDC output voltage:12VDC output power:120WRated output current:10AOutput voltage error:±1%Efficiency:85%Wave and noise:150mVp-pInlet stability:±0.5%Load stability:±0.5%Leakage currentOverload protection:105% – 150% rated power, automatically recoveryVibration:10500Hz,2G 10min./1cycle,Period for 60min,Each axesCooling method:Fan assisted cooling Working temperature and humidity:- 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost)Store temperature and …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mmRead More
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool Pump
$91.11Electrical Pump & ValveAdd to cartFeatures-Small size, high energy, low noise, long life, AC / DC dual-use-With a belt buckle,easy to carry-Stable performance,strong volume-Built-in high quality rechargeable lithium battery,cycle life>=500 times-Less than 150mA ultra-low power,full power continuous supply of oxygen for more then 24 hours-External 5V power supply input,can simultaneously oxygen and charging,longer batter life-Using waterproof technology, effective protection of …
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool PumpRead More
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USB
$153.05Smart Robot & Solar PanelAdd to cartFeatures1.Using the third-generation Sunpower solar panels imported from the United States, the photoelectric conversion rate is as high as 23% ~ 25%, and there is electricity when there is light.2. Dual USB output, charging speed 5V / 2.9A.3. High light transmission, tough and aging resistant material, worry-free charging.4. The external net bag can hold mobile …
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USBRead More
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster Demister
$113.39Temperature ControllersAdd to cartFeatures– Integrated heating and cooling, water heating system.– 4 Air outlet, 3 big fan, and 2 water pipe connections.– Use for defrosting, demisting, deicing.– Provide the comforts for travel, camping, glass defrost mist.– It can be installed at the bottom of the seat, next to the foot, or at any position on the car.– With …
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster DemisterRead More
EleksMaker EleksZAxis Z Axis & Spindle Motor Drill Chunk integrated Set DIY Upgrade Kit for Laser Engraver CNC Router
$186.29Engraving Parts & AccessoriesAdd to cartWhat’s the improvement EleksZAxis 2019 is not only a Z axis holder, but also equipped with a spindle motor and a drill chunk which means it’s a more powerful and ready-to-use integrated set.EleksMaker® 555 spindle motor gives this kit stable and qualified power source.Unlike the other loose shaft coupler, JT0 0.3-4mm drill chunk is more …
Reviews
There are no reviews yet.