10pcs 2.4G DL-LN33 Wireless Networking Board UART Serial Port Module CC2530
$108.53
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Num.:Parameter:Parameter value
1:Product number:DL-LN33
2:Chip selection:CC2530
3:Working frequency:2400~2450MHz (16 channels total)
4:Communication Interface:UART serial port (supports 13 baud rates, 2400, 4800, 9600, 14400, 19200, 28800, 38400, 57600, 115200, 230400, 125000, 250000, 500000)
5:Self-organizing network hops
6:Single hop transmission distance:70 meters (out of the air, no occlusion test)
7:Number of points that can be accommodated:The typical value is 190. When the network tends to be dense, the number of nodes decreases, and the minimum value is 96.
8:MAX packet length:63Byte (including port address information)
9:Transmission capacity:The transmission rate is higher when only one node sends data
Because the routing information of the transmitted packet occupies a certain bandwidth, the longer the length of each packet, the higher the transmission efficiency.
2400 Bit/s when each package contains 3 bytes of data.
10KBit/s when each package contains 30 bytes of data.
13:MAX send rate:250KBit/s
14:Packet retransmission times:Up to 15 times, at least 5 times when the network load is high
15:Air delay:Single-hop between nodes, less than 10mS
16:Transmit power:4. 5dBm
17:Operating Voltage:2. 5V~3. 6V
18:Working current:Less than 30mA
19:Antenna interface:PCB antenna
Pin Descriptions
Pin name:Pin position:Significance
NoUsed:1, 2,10,11,13:Not used, please keep it empty (empty refers to not connected to any circuit)
TestMode:3:Test mode, when working in normal mode in empty, grounding works in test mode. Please use it empty when the user is using it.
TestTx:4:Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
TestRx:5:Enter test information in test mode, which will be output as a controllable IO port when the user uses it.
Gnd:6, 9,16:Ground
Vcc:7,8:Power supply
BaudReset:12:If this pin is grounded first and then the module is started, the module will force a 115200 default baud rate to operate. In this mode, the baud rate of the module can be read or set. The baud rate read is the baud rate previously set by the module, not 115200. If the baud rate setting is not performed, the module will be restarted again. Work with the previously set baud rate.
Tx:14:Uart output of the module
Rx:15:Uart input of the module
Package includes
10 x Wireless Networking Board
Weight | 0.06 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.