5pcs DC-DC 45-390V Adjustable High Voltage Booster Regulator Capacitor Charging Electromagnetic Power Module
$54.80
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Module Name:High Voltage Boost Module (High Voltage Warning:Please pay attention during use.)
Module nature:Non-isolated boost module
Input voltage:Two input voltage ranges are available, (selected by jumper on the back of the PCB, the default is 10-32V input)
1. 8-16V input (for three-string lithium battery and 12V battery application)
2. 10-32V input (for wide input voltage range applications)
Input current:5A (MAX)
Static working current:15mA (12V liter 50V, the higher the output voltage, the static current will increase)
Output voltage:45-390V continuously adjustable (default 50V. This module has a voltage regulation function, the output voltage is not stable after adjustment, does not change with the input voltage changes)
Output current:0.2A MAX (related to input and output voltage difference, the higher the output voltage, the smaller the output current)
Output power:40W (peak 70W)
Working temperature:-40~+85 degrees (enhance heat dissipation when the ambient temperature is too high)
Working frequency:75KHz
Conversion efficiency:up to 88% (efficiency related to input, output voltage, current, voltage difference)
Short circuit protection:Yes. (Input 10A fuse, please do not directly short-circuit the arc at the output end! Direct short-circuit pull arc may damage the rectifier device, if you want to short-circuit the arc, please limit the power resistor in series)
Overcurrent protection:Yes. (Input current exceeds 4.5A, reducing output voltage)
Overvoltage protection:Yes. (The output voltage exceeds 410V, reducing the output voltage)
Input reverse connection protection:Yes (non-self-recovery type, connect the reverse-burn fuse, try not to reverse the connection.)
Installation method:4 3mm screws
Wiring method:Terminal block welding output
Module size:60mmx50mmx22mm (length x width x height)
Charge the capacitor to measure the measured data
470uF full to 390V time 2 seconds
1000uF full to 390V time 4 seconds
2200uF full to 390V time 8 seconds
4700uF full to 390V time 18 seconds
Package includes
5 x High Voltage Boost Module
Weight | 0.275 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.