1000W ZVS Low Voltage induction Heating Heater DIY Board Module & Tesla Coil Kit
$75.45
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Color:As the pictures shown
24V Input With No Load Current:3A
48V Input With No Load Current:6A
Maximum Current:20A
Maximum Power:1000W
Coil Inside Diameter:40 mm
Coil Height:50 mm
Tips
1. The coil accepts 40mm crucible.
2. It suits 12-36V power supply (not included).
3. Using the M4 pillars, fever smaller, more efficient.
4. The kit contains a full set of driving circuit elements and brass.
5. The higher the voltage, the greater the heating current when the same thing, the effect is better.
6. To increase the heat sink using a customized substrate as thick as 8.5mm! Cooling capacity is very powerful.
7. This section of induction heating using a low-voltage DC power supply 12-48V.Tested 53V power supply when working properly.
8. Because of its moderate power, it can be used for small parts DIY players do hardening, annealing, and other heat treatment.
9. This circuit can not only do the induction heating, but the copper tube into the high-frequency transformer is also a powerful inverter.
10. Also can be used with a graphite crucible melting gold, silver, copper, aluminum, and other metals, uniform heating fast, very convenient.
11. But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
12. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
Package Included
1 x ZVS Low Voltage Induction Heating Board
1 x Heater Coil
Warm Tips
1. Buyers need to bring their own power and cooling unit.
2. Start switching power supply voltage reaches 12V above and then access the induction heating circuit.
3. Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
4. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Weight | 0.55 kg |
---|
Customers Also Viewed
Ebyte E810-DTU(CAN-ETH) Smart Protocol Conversion GPRS Modem Modbus to TCP/IP CAN Bus Ethernet interface Modbus RTU Gateway
$96.54Smart ModuleAdd to cartSpecificationItemsDescriptionInterfaceEthernet:RJ45, 10/100MbpsCAN:1*5*3.81, ScrewingNetwork protocolIP,TCP/UDP, ARP, ICMP, IPV4Simple transparent transmissionTCP Server,TCP Client,UDP Server,UDP Client,Cloud transparent transmissionData Packing MechanismByte packing and time packingTCP Server connectionSupporting up to 6 TCP connectionsIP accessStatic IP,DHCPDNSSupportCAN Transmit baud rateA total of 15 baud rates from 6Kbps-1000KbpsCAN filtering modeUp to 8 filtration modesCAN data layoutProtocol formatParameter configurationWeb page configurationWorking current82mA@12VVoltage8V~28VDC,Over 28V may …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger Module
$4.36Battery Protection ModuleAdd to cartSpecificationProduct name:Lithium Battery Charging BoardInput voltage:5VMaximum charging current:1000 mACharge cut-off voltage:4.2 V + / – 1%Battery overcharge protection voltage:2.5 VBattery over-current protection current:3 AInput interface:micro USBSize:27mm x 17mmHow to Use1. Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery,and still retain the input voltage wiring solder …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger ModuleRead More
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double Channel
$77.83Amplifier BoardAdd to cartFeatures– Working Voltage:6-18V DC– The onboard TDA7297 audio power amplifier chip, double channel 15WX15W– Speaker for European 4-8 10-50W use– Main pin has led chip, convenient external control device, the onboard– 5.08 (mm) distance between two p terminal 2 road, around a track connection output respectively– The onboard dial potentiometer, output size can adjust the …
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double ChannelRead More
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control Module
$20.57Smart ModuleAdd to cartFeatureSeries:ESP32Model:ESP32-+MicroType:Regulator ICPower:1WApplication areas:household appliances, smart home, wearable devices, Internet of Things IoTDescriptionsESP32 vcc range:2.2V-3 6VVBAT:direct to battery (and charger)VUSB:direct to USB(5V)VCC:Output of regulator 3.3V/600mAUp to 250mA during RF transmissionsWirelessWifi:802.11 b/g/n/e/iWPA/WPA2/WPA2-Enterprise/SPSbluetooth:bluetooth 42BLESize:1.9×1.3cm/0.75×0.51inchNotePlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the …
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control ModuleRead More
50Pcs 915MHz SW915-TH12 Copper Spring Antenna for Wireless Communication Module
$28.90Module ComponentsAdd to cartFeaturesSW915-TH12 copper spring antenna is a special antenna for 915MHz wireless communication system design. The antenna has good standing wave ratio, compact shape, ingenious structure, convenient installation, stable performance and good anti-vibration and aging ability.SpecificationFrequency range:915 MHz (+/-5)Standing wave ratioInput impedance:50Maximum power:5WGain:2.15 dBiWeight:1gHeight:12.5+/-1 mm (9T)Antenna color:copperInterface Form:Direct WeldingPackage included50 x Antenna
5Pcs 360 Degree Rotary Encoder Module Encoding Module
$11.83Other Module BoardAdd to cartFunctional characteristics and technical parameters 1)Nominal voltage:DC 5V 2)Wire A, B:0.5mA (Max 5mA; Min 0.5mA) 3)Common wire:1mA (Max 10mA; Min 0.5mA) 4)Temperature range:-30→ to+80→ 5)Output signal A , B phase position output square wave, when clockwise rotation, A phase position pull ahead B phase position 90 °, when anti-clockwise, B phase position pull ahead A …
5Pcs 360 Degree Rotary Encoder Module Encoding ModuleRead More
RD21F Delay Relay Module Power for Delay off Fan Module AC 100V-220V Time 0.2S-300min Adjustable Delay
$13.11Relay ModuleAdd to cartSpecificationsVoltage:100V-220V ACPower consumptionOutput:The output voltage is the same as the input voltage, and the maximum power supply capacity is 10A.Size:88* 36 * 22mmScrew hole:center distance 83mm * 31mm, aperture 3.2mmTime range:(4 files, selected by switch)First gear:range 0.2 seconds-30 seconds, accuracy:0.1 secondsSecond gear:range 0.2 seconds – 300 seconds (5 minutes), accuracy:0.3 secondsThird gear:range 0.2 seconds-30 minutes, …
Reviews
There are no reviews yet.