1000W ZVS Low Voltage induction Heating Heater DIY Board Module & Tesla Coil Kit
$75.45
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Color:As the pictures shown
24V Input With No Load Current:3A
48V Input With No Load Current:6A
Maximum Current:20A
Maximum Power:1000W
Coil Inside Diameter:40 mm
Coil Height:50 mm
Tips
1. The coil accepts 40mm crucible.
2. It suits 12-36V power supply (not included).
3. Using the M4 pillars, fever smaller, more efficient.
4. The kit contains a full set of driving circuit elements and brass.
5. The higher the voltage, the greater the heating current when the same thing, the effect is better.
6. To increase the heat sink using a customized substrate as thick as 8.5mm! Cooling capacity is very powerful.
7. This section of induction heating using a low-voltage DC power supply 12-48V.Tested 53V power supply when working properly.
8. Because of its moderate power, it can be used for small parts DIY players do hardening, annealing, and other heat treatment.
9. This circuit can not only do the induction heating, but the copper tube into the high-frequency transformer is also a powerful inverter.
10. Also can be used with a graphite crucible melting gold, silver, copper, aluminum, and other metals, uniform heating fast, very convenient.
11. But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
12. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
Package Included
1 x ZVS Low Voltage Induction Heating Board
1 x Heater Coil
Warm Tips
1. Buyers need to bring their own power and cooling unit.
2. Start switching power supply voltage reaches 12V above and then access the induction heating circuit.
3. Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
4. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Weight | 0.55 kg |
---|
Customers Also Viewed
ESP8266 Development Kit with Display Screen TFT Show Image Or Word By Nodemcu Board DIY Kit
$32.79Smart ModuleAdd to cartDescriptionThis product kit can be used for some of the functions of the application of things, for example, display temperature and humidity, weather data display.TFT screen informationTFT screen and NodeMCU connection diagramPackage included1 x NodeMCU1 x 1.44 inch TFT screen8 x DuPont line
Band Pass RF Filter Band Pass 1420MHz BPF SMA-K
$93.91RF amplifierAdd to cartFeature1) Operating frequency:1420÷50MHz2) Insertion loss:1.8db3) Out-of-band suppression:40dB@50MHz4) Input impedance:50 ohm5) Output impedance:50 ohms6) Maximum input signal strength:13dbm (20mw)7) Input interface:SMA-K (SMA female)8) Output interface:SMA-K (SMA female)9) Dimensions:35*22*11mm10) Product weight:22gPackage includes1 x Band Pass RF Filter Band Pass 1420MHz BPF
XH-M548 2x120W Power Bluetooth Dual Channel Digital Amplifier Module TPA3116D2 Audio Amplifier Board
$28.42Amplifier BoardAdd to cartDescriptionThis product is a built-in TPA3116D2 chip with the power of 2*120W Bluetooth channel digital power amplifier board.SpecificationsParameterValueChipTPA3116D2Supply voltageDC12-24VOutput power120W*2 Supply currentMore than 3APower ratioMore than 90%Bluetooth moduleBTM835/CRS8635 (4.0 version)Transmission distanceMax 10M( without interfere)Vocal tract number2 channel (High bass control)switching frequency1.2MHzAppearance size98*80*18mmModels that support Bluetooth connectivityAndroid seriesIOS seriesWindows series Bluetooth connection methodTake mobile phone as …
3Pcs J03 LED Digital Time Delay Relay DC 6-30V on off Trigger Delay Timming Timer Switch Micro USB Power Supply 5V 12V
$32.79Relay ModuleAdd to cartFeatures1. Wide voltage power supply (6 ~ 30V), supports microUSB 5.0V power supply, easy to use;2. The interface is clear and simple, powerful, easy to understand, meet almost all your needs;3. The emergency stop function (“STOP’key);With reverse polarity protection, reverse polarity will not burn the product.4. Increase the sleep mode, if this mode is enabled, …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector Red
$8.99Terminal BlocksAdd to cartDescription50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedFeaturesEasy crimping with normal tool.Quick installation without striping wire job.Safety insulator tap.Suitable for Conductors in the rangeConductor CSA (Cross Sectional Area) 0.5 – 1.0mm², AWG (American Wire Gauge) 22 -18.Make Quick Connections without stripping.Easy crimping with normal tool, squeeze down the metal insert with pliers and …
50pcs Scotch Lock Quick Splice 22-18 AWG Wire Connector RedRead More
Excellway PCT-2 50pcs 2Pin Colorful Docking Connector Electrical Connectors Wire Terminal Block Universal Electrical Wire Connector
$54.66ConnectorsAdd to cart50pcs 2Pins Colorful Docking Connector Reusable Spring Terminal Block Electric Cable Wire Connector Main Features Wire connector. No wire loose, the risk of crisp tape, transparent and safe to see. With a test hole, measuring voltage, without removing the tape. Direct plug, insert the wrong can be pulled out, re-connected. Each contact point at the …
RIDEN 7 in 1 33V 10A Multifunction White OLED Digital Electrical Parameter Tester Ammeter
$26.23Power Supply ModuleAdd to cartSupport function:Voltage, Current, Time, Power, Temperature, Capacity, Energy, Run TimeFeatureOLED:WhiteVoltage:33VCurrent:10ANote:The measurement range are for reference match only, please check the value according to the voltage and current.Package includes1 x 33V 10A Electrical Parameter Tester
Reviews
There are no reviews yet.