Waveshare STLINK-V3MINI ST-LINK Emulator STM32 Downloader Debugger online Debugging
$52.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Documents
Datasheet:Click here to open
Driver:Click here to open
Introduction
Suitable for downloading and online simulation of STM32 series chips.
Combining the enhanced functions of the third generation STLINK-V3SET and the convenience of an independent module, compared with the previous two generations, the write performance is three times higher, the volume is small and it is easy to carry.
Support the virtual COM interface, allowing the host PC to communicate with the target microcontroller through a UART; support the mass storage function, and simply drag and drop the binary file to complete the programming.
Features
Independent probe
About 15≠30mm high-density integrated PCB, compact and easy to carry
Self-powered via Micro USB interface (no power to target board)
USB 2.0 high-speed compatible interface
Direct firmware update support (to support more new devices)
Support JTAG/SWD interface
Support 3V~3.6V voltage range and 5V tolerance input
Matching with 1.27mm pitch STDC14 to STDC14 flat cable
Equipped with adapter board and 2.54mm pitch 20-pin JTAG/SWD flat cable (Additional delivery by Weixue)
SWD and serial line viewer (SWV) communication support
Support virtual COM port (VCP)
UART interface supports 3V~3.6V voltage range and 5V tolerance input
VCP frequency up to 15MHz
Drag and drop Flash programming
Two-color LED:communication, power
Supported software
STM32CubeProgrammer
Keil MDK-ARM
IAR EWARM
SW4STM32
STVP
GCC-based IDEs
Supported devices
Support all STM32 series MCUs with JTAG/SWD interface
Package includes
1 x STLINK-V3MINI ST-LINK Emulator STM32 Downloader kit
Weight | 0.112 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.