0.36 inch Programmable PLC Controller Parameter Display Screen Module D110 D114 PLC Programming Module
$34.09
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Descriptipn
This digital tube display can be connected with the domestic PLC produced PLCs ,which can replace the touch screen and text on small equipment, and has a very high price ratio. . In many projects, it can also replace the development of single-chip microcomputers, with short development cycle, mature circuit, stable and reliable. You can also use our digital display board to take the board, generation counter, timer, flexible programming of PLC according to your own place of use to adapt to different requirements, avoiding the general-purpose counters on the market, the timer is not flexible during use.
Work Mode
1. Main mode
On power-on, it enters the main mode. In this mode, the upper row of digital tubes displays the value of D110. The lower row of digital tubes displays the value of D114. The button switch controls the closing and opening of the corresponding intermediate relay (M). The indicator light is based on the internal intermediate relay. (M) is closed and opened to control the on and off.
2. Input parameter mode
Press the SET button for 3 seconds to enter the parameter mode. In the parameter mode, you can change the value of the data register D200. The above row of digital tubes (double-row digital tube) or the left two-digit digital tube (single-row digital tube) The board is used to display the number of the data register to be changed. Press the upper triangle key (increase) to change it by pressing the triangle key (decrease). When changing, the value read will be in the lower row of digital tubes (double row digital tube) The board or the 4-digit digital tube on the right (the board of the single-row digital tube) is displayed, and the UP button and DOWN can also be used to change the value.After changing the value, press the SET button for 3 seconds to enter the main mode.
Parameters
1.Relationship between button to PLC internal relay
SET to M170
Triangular button to M171
UP to M172
DOWN to M173
PS:When the button is pressed (such as UP), the corresponding PLC internal relay (such as M172) is closed. When the button is released, the corresponding PLC internal relay is disconnected. Note:In the main mode, press the SET button to operate in the same way as the other 3 buttons. When the button is pressed for 3 seconds, the M170 is always closed.
2. Relationship between indicator light number to PLC internal relay
0 to M160
1 to M161
2 to M162
3 to M163
PS:When the internal intermediate relay is closed (such as M160), the corresponding | indicator will light (such as O), and when the internal intermediate relay is disconnected, the corresponding indicator will be off. When the value of the internal data register D110 is always displayed in the main mode, the number of the data register to be changed displayed when the parameter mode is set
3. Relationship between Upper row of digital tubes number to PLC internal relay
0-999999 to D110
the decimal number to D112
Adjustable number of data memories to D113
4. Relationship between lower row of digital tubes number to PLC internal relay
0-999999 to D114
the decimal number to D116
Adjustable number of data memories to D117
Package Included
1 x 0.36 Inch Programming PLC Controller Parameter Display Screen Module
Weight | 0.047 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.