DC-DC 5V to 3.3V 9V 12V 24V USB Buck Boost Power Supply Module Voltage Regulator Module Desktop Power
$14.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is an instrument with integrated buck-boost power supply module and multi-function voltage ammeter.
In ‘PER’ work mode, it can be used as a buck-boost power supply module. It can convert to DC 3.5V~12V to DC 1.2V~24V and power is about 2W~3W.
In ‘VAH’ work mode, it can be used as multi-function voltage ammeter. It can be used to measure voltage, current, power, battery capacity, discharging time.
It is very suitable for technical engineers to develop, debug instrumentation, after-sales engineers travel maintenance, etc.
Features
1. Dual operating system
2. Support power supply output function
3. Support test power supply function
4. Support over power protection
5. LCD high definition display
6. Automatic calibration
7. Multi-parameter simultaneous display
8. Support power saving mode
9. Three voltage input methods
10. Support voltage and current calibration
Parameters
1. Product name:XY-LUP Boost Buck Converter Voltmeter Ammeter;
2. Model:XY-LUP;
3. Work Voltage:DC 3.5V-12V;
4. Output Voltage:DC 1.2V-24V;
5. Output Power:3W(MAX);
Maximum output power within 2W when output DC 1.2V~2V;
Maximum output power within 3W when output DC 2V~20V;
Maximum output power within 2.5W when output DC 20V~24V;
6. Output voltage accuracy:+/-0.5%
7. Output voltage accuracy:+/-1%
8. Measure voltage range:DC 0~35V
9. Measure current range:0~3A
10. Measure power range:0~110W
11. Measure battery capacity range:0~9999Ah
12. Discharging time:0~100hours
13. Work Temperature:-40→~85→;
14. Work Humidity:0%~95%RH;
15. Size:77*33*16mm;
Mode Switching
1. The default is the Power Output Mode PER at first;
2. Keep press button ‘ON/OFF’ to switch mode;
3. When power is removed, the module can remember the current operating mode. The default work will be the same mode when power on at next time.
Power Output Mode PER
1. Input from standard USB male socket, Micro USB female socket and ‘VIN+/VIN-‘;
2. The output from ‘OUT+’ and ‘OUT-‘.The ‘COM’ terminal can not be used at PER mode.
3. Rotate the potentiometer to adjust the output voltage;
4. There is a symbol ‘OUT’ when working in PER mode;
5.Terminal ‘COM’ unavailable at PER mode;
6. Short press button ‘ON/OFF’ to turn ON or OFF output voltage. At this time, the screen will display 0V.
7. Keep press button ‘ON/OFF’ for 2 seconds to switch display output current or output power at the second line.
8. Keep press button ‘ON/OFF’ for 5 seconds to turn ON or OFF display screen backlight. But the module can output voltage normally.
9. Keep press button ‘ON/OFF’ for 10 seconds to turn switch work mode PER or VAH.
10. The module supports over-power protection. If the rated power is exceeded, the module will automatically stop output voltage and the LCD will display ‘OPP’ and flash.
11. The module does not support reverse connection protection, please do not short circuit and reverse.
Calibrate Voltage/Current
1. Calibrate Voltage:Keep press button ‘ON/OFF’ before power ON and then power ON and release button. Automatically enter calibration mode after 5 seconds. The voltage display will be flashing. Short press button to adjust and calibration voltage. Adjustment range is -0.2V~0.2V. Enter current calibration mode if keep press button for 2 seconds.
2. Calibrate Current:Enter current calibration mode if keep press button for 2 seconds after Calibrate Voltage. The current display will be flashing. Short press button to adjust and calibration voltage. Adjustment range is -0.02A~0.02A.Automatically save parameters and return to the normal display interface if keep press button for 5 seconds.
3. User needs to repeat the correction multiple times. If the voltage(current) error exceeds 0.2V(0.02A).
4. For example Change 12V to 12.5V
4.1. First calibration:Change 12V to 12.2V
4.2. Second calibration:Change 12.2V to 12.4V
4.3. Third calibration:Change 12.4V to 12.5V
Use steps
1. Connect to power supply from the input terminal;
2. Set work mode by keep press button ‘ON/OFF’ for 10second;
3. Connect load or Device Voltage;
4. Rotate potentiometer to change output voltage if work in PER mode;
5. Short press button ‘ON/OFF’ to switch parameter display;
6. Test and use.
Application
1. Ordinary low power supply;
2. Voltmeter;
3. Ammeter;
4. Battery capacity tester;
5. Battery load capacity tester;
Note Please
1. The module does not support reverse connection protection, please do not short circuit and reverse.
2. Adjust the working mode before use.
3. USB just can input DC 5V. User needs input from ‘VIN+’ and ‘VIN-‘ if input 3.5V-12V.
Package includes
1 x Boost Buck Converter
Weight | 0.025 kg |
---|
Customers Also Viewed
5pcs RS232 to TTL Serial Converter Module DB9 Connector MAX3232 Serial Module with Cable
$21.38Converter BoardAdd to cartFeatureIt is widely used in radio modification, phone flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgradeIt can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU CommunicationPort:TX RX VCC GNDChip:domestic MAX3232Package includes5 x Serial Module5 x Cable
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with Case
$37.91DIY Electronic KitsAdd to cartDSO138mini brings in the following improvementsBetter structure and smaller size. The bulky pin-headers connecting the LCD and main board in old DSO138 has been eliminated. The soldering of these pin-headers has being found problematic for beginners.USB or battery powered. This makes the scope much more convenient to be used as a portable device. New version …
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with CaseRead More
CJMCU-2112 CP2112 Evaluation Sensor for CCS811 Debugging Board USB to I2C Communication Converter Module
$16.67Sensor & Detector ModuleAdd to cartFeatureDirect connection to PC via USBDirect connection to host system via I2CSimple software GUI for easy setup and data loggingDetermine the effects of Temperature & HumidityIntelligent algorithms to output TVOC / eCO2 levelsPackage includes1 x Sensor Module
3 Pcs Red Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$35.10Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included3* RED Acrylic Case Kit
5pcs CTS DTR USB Adapter Pro Mini Download cable USB to RS232 TTL Serial Ports CH340 Replace FT232 CP2102 PL2303 UART TB196
$23.80Converter BoardAdd to cartFeatures– This product use CH340 chips, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; – Uses:Replace FT232 for Arduiuo Pro Mini Download – With receiver indicator,transmitter indicator, and power indicator.– Chip:CH340C– Compatible with PRO MINI download port– Board size:18mm x 30mm(Does not include USB ports and pins)– Supports the following …
10Pcs XH Pitch 2.54mm Single Head 4Pin 4Way Wire To Board Connector 15cm 24AWG with Socket
$6.55Electronic Accessories & SuppliesAdd to cartFeatureType:XH2.54 Single Head WirePin Number:4 PinWire Gauge:24AWG Pitch:2.54mmLength:15cmQuantity:10 Sets(10Pcs Single Head Wire + 10Pcs Socket )Note:the cable color may have different.Package included10 x XH2.54 Single-Head 4Pin 4Way Wire To Board Connector10 x Socket
2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office Decor
$30.50PlasticsAdd to cartSpecificationsMaterial:PVCSize:45cm X 200cmFeatures– Energy-saving and environmental protection. No gum paste, paste can be repeated.– Deadening UV intrusion, protecting indoor objects fading and aging.– Filter light and reduce glare, protect the skin and vision.– Easy to mount and clean.How to use1. First clean the surface of the pasting position, pasting surfaces should be smooth, not be …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office DecorRead More
Reviews
There are no reviews yet.