AVR ISP Bootloader Shield Burning Programmer for Atmega328P with Buzzer and indicator for UNO R3
$13.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a programmer expansion shield that allows your Ar duino board to modify the fuse bits and burn bootloader into external chip and other Ar duino boards.
On-board buzzer and LED indicators, indicating whether the burning is successful, it is convenient for Ar duino board designers to batch burning. According to OPEN-SMART user manual, it is very easy to use.
Features
– Compatibility:As it uses SPI pins of ICSP interface, compatible with UNO R3 / Mega2560, can change to the bootloader burner when it is directly plugged onto the two boards.
– Operating voltage:5V
– Operating current:500mA (max)
– Ar duino board to be burned:support UNO R3 / Mega2560 / Nano / pro mini (5V 16M)
– On-board buzzer, if the fuse bit is successfully modified, it will sound once, and then if burning bootloader is OK, it will sound once again. If it is not two beeps, burning is failed. You can capture the sound instead of LED lights, so this will improve the efficiency of burning.
– On-board LED indicators, HEART BEAT led lights up like a breathing light when powered normally. During programming, the PROG indicator flashes until it finishes. If the programming is unsuccessful, the ERROR indicator (red) will light.
– Onboard 28P locking seat for Atmega328P, Atmega168P, Atmega8 bootloader burning
– Onboard ISP_6PIN interface, for the external Ar duino board bootloader burning
– On-board ISP_10PIN interface
– On-board FT232RL and CH340G USB to TTL programmer interface for uploading code to the chip on the 28P locking seat.
Package includes
1 x AVR ISP Bootloader
Weight | 0.038 kg |
---|
Customers Also Viewed
Christmas LED Colorful Luminous Mask Stage Bungee USB Charging EL Cold Light Mask
$24.04EL ProductsAdd to cartDescriptionProduct Name:Colorful Luminous MaskProduct material:luminous sourceProduct size:19*10CMLight color:color gradient / breathing light dimming power supply mode:USB charging 3.7V, 400 mAProduct use time:charging for 1-2 hours, continuous light for about 10-12 hoursProduct unit weight:about 60 gramsPackage included1 x Christmas mask
20pcs N/O N/C Emergency Stop Switch Push Button Mushroom 4 Screw Terminals
$58.87Electronic Accessories & SuppliesAdd to cartSpecificationTwo switching circuits:1 Normally Open + 1 Normally Closed (DPST:Double-Pole-Single-Throw)Stackable contacts:mix and match to suit your needContact rating:600V / 10ANumber of terminals:4Panel cut out diameter:22mmDepth behind panel:44.5mmButton diameter:40mmPackage included20 x Emergency stop switch
USB to Pin Module USB interface Converter Board Electronic Building Blocks for
$3.67Converter BoardAdd to cartFeatureSize:24 x 21 x 10mmFixing hole:3mmPitch:600mil (15.24mm)Interface:A-type USB holderApply:Change the USB interface to pins, easy to connect the target devicePackage includes1 x USB to Pin Module
5pcs SHT21 Temperature and Humidity Sensor Module High Precision Environmental Measurement Smart Home
$53.30Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openParameterWorking voltage:3VRelative humidity:0~100%RHTemperature:-40~+125°CCommunication method:IIC interfacePlease refer to the product manual for more information:Click here to open.Package includes5 x Sensor module
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with Shell
$81.72RF amplifierAdd to cartDescriptionThis amplifier has the advantages of wide frequency range, high gain, low noise figure, etc. It can be used in various radio frequency receiving front ends to increase the communication distance! Wide range of shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other places where low-noise and small-signal radio frequency amplification is …
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with ShellRead More
5pcs Miniature Digital Recording Voice IC Chip Module Movement Recorder Recording Pen Music Card
$19.64DIY Electronic KitsAdd to cartFeatureEasy to use 6 seconds voice recording, high quality, clear voice reduction, can be used as a micro recorder, recordingpen, megaphone, recording greeting card module, this module can drive 8 euro 0.5W speakers. Operating InstructionsRecording button; press and hold the button to stop recording (recording will begin to drop a sound), let go of recording …
Reviews
There are no reviews yet.