CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
50pcs 3296W 50 ohm Trimpot Trimmer Potentiometer
$13.20Electronic Accessories & SuppliesAdd to cartSpecificationResistance:50 ohmPower (Watts):0.5W, 1/2W Tolerance:±10% Temperature Coefficient:±100ppm/°C Number of Turns:25 Adjustment Type:Top Adjustment Resistive Material:Cermet Mounting Type:Through Hole Termination Style:PC Pins Size / Dimension:9.53 x 4.83 x 10.03mmPackage included50 x Potentiometer
3pcs DC-DC 3V-35V To 4V-40V Step Up Power Module Adjustable Boost Converter Adjustable Voltage Board
$60.09Power Supply ModuleAdd to cartDescriptionInput Voltage:DC 3V-35VOutput Voltage:DC 4V-40V (continuously adjustable)Efficiency:94%(MAX)Size:L37mm*W32mm*H15mmWorking Temperature:-40-+85 degreesLoad capacity:Max 80WThe way of Connection:the connection terminal does not need to be soldered, the inchINinch is the input, and the inchOUTinch is the output.NoteWhen the output voltage is closer to the output voltage,the carrying capacity is higher,and the efficiency is also higher.Measurement reference tableInput voltage:Output voltage:Maximum …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mm
$28.42Power Supply ModuleAdd to cartParameterModel:S-120-12AC input voltage range:220VACInput current:0.5A/230VAC impulse current:Cold-start current 9A/230VDC output voltage:12VDC output power:120WRated output current:10AOutput voltage error:±1%Efficiency:85%Wave and noise:150mVp-pInlet stability:±0.5%Load stability:±0.5%Leakage currentOverload protection:105% – 150% rated power, automatically recoveryVibration:10500Hz,2G 10min./1cycle,Period for 60min,Each axesCooling method:Fan assisted cooling Working temperature and humidity:- 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost)Store temperature and …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mmRead More
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool Pump
$91.11Electrical Pump & ValveAdd to cartFeatures-Small size, high energy, low noise, long life, AC / DC dual-use-With a belt buckle,easy to carry-Stable performance,strong volume-Built-in high quality rechargeable lithium battery,cycle life>=500 times-Less than 150mA ultra-low power,full power continuous supply of oxygen for more then 24 hours-External 5V power supply input,can simultaneously oxygen and charging,longer batter life-Using waterproof technology, effective protection of …
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool PumpRead More
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USB
$153.05Smart Robot & Solar PanelAdd to cartFeatures1.Using the third-generation Sunpower solar panels imported from the United States, the photoelectric conversion rate is as high as 23% ~ 25%, and there is electricity when there is light.2. Dual USB output, charging speed 5V / 2.9A.3. High light transmission, tough and aging resistant material, worry-free charging.4. The external net bag can hold mobile …
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USBRead More
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster Demister
$113.39Temperature ControllersAdd to cartFeatures– Integrated heating and cooling, water heating system.– 4 Air outlet, 3 big fan, and 2 water pipe connections.– Use for defrosting, demisting, deicing.– Provide the comforts for travel, camping, glass defrost mist.– It can be installed at the bottom of the seat, next to the foot, or at any position on the car.– With …
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster DemisterRead More
EleksMaker EleksZAxis Z Axis & Spindle Motor Drill Chunk integrated Set DIY Upgrade Kit for Laser Engraver CNC Router
$186.29Engraving Parts & AccessoriesAdd to cartWhat’s the improvement EleksZAxis 2019 is not only a Z axis holder, but also equipped with a spindle motor and a drill chunk which means it’s a more powerful and ready-to-use integrated set.EleksMaker® 555 spindle motor gives this kit stable and qualified power source.Unlike the other loose shaft coupler, JT0 0.3-4mm drill chunk is more …
Reviews
There are no reviews yet.