CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
CP2102 USB To TTL/Serial Module Downloader
$10.11Converter BoardAdd to cartCJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver through …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber Blankets
$56.69FabricsFibers & TextilesAdd to cartDescription24x12x1 Inch Aluminum Silicate High Temperature Insulation Ceramic Fiber BlanketSpecificationMaterial:Aluminum SilicateSize:61x30x2.5cm / 24 x12 x1 inchClassification temperature:1260 ℃Long-term temperature:1100 ° CThermal conductivity:0.03Applications* Furnace, heating equipment, pipelines and other lining or wall lining insulation* Furnace door, lid, roof and other heat sealing* Chemical, electrical, high-rise building insulation fireFeatures* Seismic heat resistance* Low thermal conductivity and low …
24x12x1 inch Aluminum Silicate High Temperature insulation Ceramic Fiber BlanketsRead More
10pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$82.12DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
5Pcs PS2 Game Joystick Switch Sensor Module
$10.92Sensor & Detector ModuleAdd to cart5Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
100W Outdoor Sunpower Foldable Solar Panels Cells Waterproof Fast Charger Solar Panel
$97.19Solar PanelAdd to cartFeatures1. High efficiency, fast charging.2. Small size, super thin, waterproof, easy to operate, wide range of application3. Easy to carry, with a handle.4. It is more than 5% higher than ordinary efficiency.5. Solar energy conversion efficiency:25%Specifications–Output voltage:USB5V + DC18V–Output current:20A, 5.5A–Color:Black–Solar panel type:Monocrystalline silicon–Conversion efficiency:>25%–Output interface:USB–Open Size:680mmx305mm/26.7inx12in–Folding size:170mmx305mm/6.7inx12inPackage Included–1X Soalr Panel–2X Carabiner–1X USB cable
Reviews
There are no reviews yet.