CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
5PCS Cake Stand Set for Wedding Decorations White Table Kit Decorating Party Suppliers for Fondant Dessert Metal Cupcake Stand
$159.44Lab Clamp & StandAdd to cart5Pcs Metal Cupcake Stand Cake Dessert Wedding Event Party Display Tower Plate Features※ Ideal cake stand, widely used for personal birthday party, birthday, celebrations, banquets, marriage, graduation ceremony. ※ Used to display merchandise, play a very good decorative effect.※ This is also perfect for afternoon tea session. ※ High quality raw iron material, rejecting waste …
Robotdyn Digital Tilt Sensor Module Tilt Switch Angle
$8.73Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureDigital tilt sensor, have simple function, if the sensor are not placed on a strict flat surface, the little steel ball in the green tube will slip to one end of it, …
Robotdyn Digital Tilt Sensor Module Tilt Switch AngleRead More
20pcs LM317 DC-DC 1.5A 1.2-37V Adjustable Power Supply Board DC Converter Buck Step Down Module
$41.11Boost & Buck ModuleAdd to cartSpecificationsOutput Current:1.5A (minimum), 2.2A (typical value)Input-output voltage difference (VI-VO):40Vdc (max)Adjustable output voltage range:1.2 – 37VWorking temperature:-55 ° C to + 150 ° CCurrent output:1.5AVoltage Input:4.2 – 40 VOperating temperature:0 ° C – 125 ° CCharacteristic frequency:100 (MHz)Module size:35.6 (mm) x 16.8 (mm)Output mode:VOUT output positive, GND output negativePackage included20 x LM317 DC-DC 1.5A 1.2-37V adjustable …
4-way Switch Module Ewelink Phone Remote Control Small Voice DIY SCM Development Modified Board
$13.11Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Power supply descriptionThis module uses 5V DC power supply, usable with USB power supply equipment such as mobile phone charger, charging treasure, computer and so on.Enter descriptionIt can be connected with four …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$8.73Sensor & Detector ModuleAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development BoardRead More
DG7512 75V 12A High Current Ideal Diode Solar Energy Anti-backflow Charging Anti-backflow Protection Low Resistance
$7.64Electronic Accessories & SuppliesAdd to cartSpecificationModule name:DG7512 anti-backflow ideal diodeWorking voltage:DC5-75VWorking current:12A (MAX) (without heat dissipation for a long time working within 10A,Can be used in parallel to increase operating current)Static operating current:0.7mAInput reverse connection protection:None (do not reverse the positive and negative poles, otherwise the chip will be burned)Working temperature:-40→~125→Connection method:welding outputModule size:25 *14*3.8mmPackage included1 x High Current Ideal …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash Light
$28.42Other Module BoardAdd to cartSpecificationsModel No.:HBV-1610Model Size:86.11mm ≠ 21mm ≠ 5.03mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinityResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:730 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:GT2005 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:1600*1200Sensitivity:33000mv /(lux-sec)Pixel Size:1.75m x 1.75┢m Maximum Image Transfer Rate:MJPEG 640×480 …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash LightRead More
Reviews
There are no reviews yet.