CN3791 MPPT Solar Panel Voltage Regulator Controller 6V 9V 12V 1 Cell Lithium Battery Charge Solar Panel Charger Board Controller Module
$15.30
Voltage 6V / Voltage 9V / Voltage 12V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a maximum power poin tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel or other photovoltaic device and into a rechargable LiPo battery. Set-up is easy as well, just plug your solar panel into one side of the solar charger and your battery into the other and you are good to start charging!
Solar maximum power poin tracking (MPPT) is to ensure that the light intensity change, photovoltaic cells output maximum power, to make full use of solar energy. In general, need to use a switch mode DC – DC converter to realize MPPT function, keep the output voltage and charging current product maximize (output).
The output of the Solar Charger is intended to charge a single polymer lithium ion cell. The load should be connected in parallel with the battery. Each Solar Charger comes equipped with a CN3791 power tracking battery charging circuit and pre-installed four 2-pin JST/PH2.0 connectors.
Default we have set the holding voltage for MPPT. So we have 3 version for the input voltage 6V/9V/12V(for Solar Panel working voltage 6V/9V/12V), very suitable for the application of the input voltage and battery voltage difference is bigger.
Features
Trickle charging of deeply discharged batteries
Automatic recharge
Charge status and charge end status indication
Soft start
Battery overvoltage protection
Solar panel maximum power poin tracking
Complete charge management for single-cell lithium batteries
Specifications
Input voltage:select the corresponding module according to the nominal voltage of the solar panel (6V/9V/12V)
Output voltage:nominal 3.7V full charge voltage 4.2V lithium battery
Interface:2-pin JST connectors (or PH2.0)
Max Charging current:2A
PWM switching frequency:300KHz
Charging voltage:4.2V ÷ 1%
Working environment temperature:-40 C to +85 C
Size:45X20X9.5mm
Note
1.If the CN3791 MPPT Solar Charger is 9V version, you must use the Solar panel working Voltage is 9V.
2.Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included
1 x CN3791 MPPT Solar Panel Regulator Module 6V/9V/12V
Weight | 0.1 kg |
---|
Customers Also Viewed
10Pcs Mesh Pot Net Basket Hydroponic Aeroponic Flower Container Plant Grow Pot Cup Planting Baskets
$16.19Lab Clamp & StandAdd to cartSpecification Material:Plastic Height:100mm Weigh:10gThe upper edge of the outer diamete:70mmThe outer diameter:63mmThe lower end of the outer diameter:54mmFeatures1.Good permeability:these net cups are designed with slotted mesh, can promote a more efficient plant growth through aeration.2.Growing by its own way:net pot with holes in the bottom, produce healthy roots with even drainage, which let the roots …
2Pcs Yellow Color Cute Pattern Silicone Protective Case for Micro:bit Expansion Board DIY Part
$19.02Smart Robot & Solar PanelAdd to cartFeatures1. Appearance and fun, make accessories safer2. Food Grade Safety Silicone Materials3. Protect Microbit from external wearSpecifications– Product Size:56*45mm– Thickness:12mm– Color:Yellow– Material:silica gel– Fit for:Micro:bit Expansion Board– Quantity:2Package Inlcuded2 x Yellow Micro:bit Silicone Protective Case (Not included the Micro:bit control board)
Hepa Filter Accessory for ELECTROLUX H13 Vacuum Cleaner
$22.26Switch AccessoriesAdd to cartHEPA H13 Filter for Most Modern ELECTROLUX Vacuum CleanerSpecificationsMaterial:PlasticFit For:Electrolux,Boldio,Excellio,Oxygen,Oxy3-Systems,Praxio,Powersystem,Smartvac,Ultra Silencer Series,FC8031 SeriesPackage Included1 x Filter
Wood Heating Stove Door Gasket Round Fiberglass Rope Seal High Density Fibreglass Strips Rope
$22.67FabricsFibers & TextilesAdd to cart2m 9.5mm High Density Fibreglass Rope Wood Fire Stove & Heater Door Seal 550°CSpecificationType:Fibreglass RopeColor:WhiteMaterial:FibreglassFire-resistant temperature:550 (°C)Tear strength:300Compressive strength:100Tensile strength:300Elongation at break:100Size:approx.9.5mm*2m(1cm=10mm=0.39inch)Measurement Details in the attached picture.Package Included1X Fibreglass RopeFeatureIt is tough, durable and strong yet flexible enough to make installation as a door seal easy.Our Fibreglass Rope has a maximum operating temperature of 550°C. …
100Pcs PCB DIY Soldering Copper Prototype Printed Circuit Board 70mm x 90mm
$104.88Electronic Accessories & SuppliesAdd to cartSpecificationMaterial:Single Side Copper PCB (Made of bakelite)Quantity:5PcsSize:70 x 90mm / 2.75 x 3.54inch(Approx. L*W)Thickness:1.5mm / 0.59inch(Approx)Hole pitch:2.54mm / 0.1inch(Approx)Diameter of Hole:1mm / 0.04inch(Approx)For DIY solderingEasy to installGreat for electronic accessoriesPackage includes100 x Circuit Board
10pcs KSD9700 250V 5A 45 Plastic thermostatic Temperature Sensor Switch NC
$9.96Sensor & Detector ModuleAdd to cartFeaturesKSD9700 product widely used in home appliance’s motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc.SpecificationModel.No.:KSD9700Material:PlasticNet Weight:3gOptional:Normally Closed (NC)Rated Voltage:250VCurrent:5ACable Length (Approx.):7.3cm/ 2.9 inchHead Dimension (Approx.):21 x 7.5 x 3.6mm / 0.8 x 0.3 x 0.14 inch (L*W*T)Temperature:45→Package included10 x Temperature Control Switch
Electronics Component Super Kit with Jumper wires Color Led Resistors Register Card Buzzer for Arduino
$43.00DIY Electronic KitsAdd to cartFeatureElectronics component super kit perfect for anybody who use for Arduino, raspberry piPackage included1 x Project Box1 x Power Supply Module1 x 830 Holes Breadboard10 x Resistor(100┯)10 x Resistor(220┯)10 x Resistor(330┯)10 x Resistor(560┯)10 x Resistor(1k)10 x Resistor(2k)10 x Resistor(4.7k)10 x Resistor(10k)10 x Resistor(20k)10 x Resistor(51k)10 x Resistor(1M)10 x Resistor(10M)5 x 100uf Electrolytic Capacitors5 x 100nf …
Keyes NEO-7M GPS Module Satellite Positioning onboard Ceramic Antenna Serial Port Driver
$34.98Smart ModuleAdd to cartOverviewThis GPS module is based on the NEO-7M, can be used for satellite positioning. The module supports NMEA standard protocol output, built-in FLASH, and can save the setting information after power-off without external EEPROM. This module has an on-board ceramic antenna, which can easily locate the satellite in an open place without an external antenna. …
Keyes NEO-7M GPS Module Satellite Positioning onboard Ceramic Antenna Serial Port DriverRead More
Reviews
There are no reviews yet.