EQKIT Audio Spectrum 8×4 DIY Kit Level indicator Voice Spectrum Lights Red+Blue Colorful Display
$11.74
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
This is a kit parts. You should solder it by yourself.
Features
1. High sensitivity;
2. Low power;
3. Wide operating voltage range;
4. Low power consumption;
5. DIY design;
6. Colorful display;
7. Mode adjustable;
Parameter
No.:Parameter:Value
1:Model:ASD-84
2:Standby current:Less than 1mA
3:Soldering difficulty Level:Easy
4:Working voltage:DC 5V
5:Display LED:8*4
6:Display color:Red+Blue
7:LED Size:2*5*7
6:PCB Size:94*39.5mm
Instructions
Step 1:Complete the installation in the normal way following installation manual and schematic. (Please request separately).
Step 2:Connect audio;
Step 3:DC 4-9V voltage;
Step 4:Adjust the working mode
Step 5:Test and use.
Mode setting
Mode:Set Method:Remarks
Factory Testing Mode:Press button S1 before Power on:It is used to detect all LED whether can be ON
Fast Flashing Mode(3):Short press S1 less than 1second:The refresh frequency is very fast
Medium Flashing Mode(2):Short press S1 less than 1second:The refresh frequency is general
Slow Flashing Mode(1):Short press S1 less than 1second:The refresh frequency is slow
High Sensitivity Mode(H):Long press S1 more than 2second:It can detect weaker audio signals
Medium Sensitivity Mode(B):Long press S1 more than 2second:It can detect general audio signals
Low Sensitivity Mode(L):Long press S1 more than 2second:It can filter more interference audio signals
Using attention
1. Please make sure all the components in the right direction and right place.
2. Please check whether pseudo/float welding. This is very important.
3. The soldering iron can’t touch the components for a long time, otherwise, the components will be damaged because of the high temperature.
4. It is recommended to use a stable power supply, otherwise, it may interfere with the audio signal output.
Component list
NO.:Component Name:PCB Marker:Parameter:Quantity
1:Metal Film Resistor:R15:10ohm:1
2:Metal Film Resistor:RX1-RX4,RY5-RY12:47ohm:12
3:Metal Film Resistor:R13-R14:470K:2
4:Ceramic Capacitor:C5:0.001uF 102:1
5:Ceramic Capacitor:C2-C4:0.1uF 104:3
6:Electrolytic Capacitor:C1:220uF:1
7:Red LED:D1-D16:2*5*7mm:16
8:Blue LED:D17-D32:2*5*7mm:16
9:Audio Socket:J2,J3:SMD3P:2
10:Power Socket:J1:DC3.5:1
11:WD1084:U1:DIP-16:1
12:Button:S1:6*6*5:1
13:USB to DC Cable::100cm:1
14:Audio Cable::100cm:1
15:PCB:ASD-84:94*39.5mm:1
Application
1. Electronic teaching
2. Exercise soldering skills
3. Circuit application
Frequency asked questions
1. Why can’t work
A:Please make sure all components in the right direction and right place and check whether pseudo/float welding. This is very important.
Install tools you need preliminary preparation by yourself
1>. Soldering iron;
2>. Multimeter;
3>. Solder wire;
4>. Iron stand;
5>. Diagonal cutting pliers;
6>. The screwdriver;
7>. Tweezers;
8>. Long nose pliers;
9>. Suction tin;
10>. Cleaning sponge;
11>. Screwdriver set.
Package included
1 x EQKIT® Audio Spectrum 8×4 DIY Kit
Weight | 0.049 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.