ESP8285 ESP-1 Serial Wireless WiFi Transmission Module with ESP8266
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285.
This small chip is encapsulated an enhanced Tensilica’s L106 diamond series 32-bit kernel CPU with a SRAM.
Thus, ESP8285 has the complete function Wi-Fi function; it not only can be applied independent but can be used
as a slaver working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.
The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
, please visit this GitHub link to get the manual and tools, https://github.com/Smart/SZDOITWiKi/wiki/ESP8285—ESP-1
Features
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 →, compared to the 85→ for ESP8266.
Working temperature:-40→-125→
Module size:24.5mm*14mm;
SOC characteristics
Built-in Tensilica L106 ultra-low power consumption 32-bit CPU, the main frequency can be
80MHz and 160MHz, also support RTOS;
Built-in TCP/IP protocol stack;
Built-in 1 channel 10-bit high precision ADC;
The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
Can be wake-up within 2 ms, and connect to transmit data package;
the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
built-in 1M byte for SPI Flash.
Wi-Fi characteristics
Support 802.11 b/g/n/e/i
Support three modes:Station, SoftAP, and SoftAP+STA;
Support Wi-Fi Direct(P2P);
Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
WAPI(SMS4), WEP(RC4), CRC;
P2P find, P2P GO mode/GC mode and P2P power management;
WPA/PA2 PSK and WPS;
Support 802.11 i security:pre-certification and TSN;
Support 802.11n (2.4 GHz);
802.1h/RFC1042 frame encapsulation;
Support seamless roam;
Support AT remote updation and cloud OTA updation;
Support SmartConfig function for Android and iOS device SmartConfig.
Peripheral for Module
1*UART;
1*En;
MAX 4* GPIOs;
Application
Serial Transparent transmission;
WiFi probe;
Smart power plug/Smart LED light;
Mesh networks;
Sensor networks;
Wearable electronics;
Securit ID label;
Wireless location recognition;
Wireless location system beacon;
Industrial wireless control.
Package included
1 x ESP8285 ESP-1 Serial Wireless WiFi Transmission Module
Weight | 0.006 kg |
---|
Customers Also Viewed
Freezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary thermostat
$22.26Switch AccessoriesAdd to cartFreezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary ThermostatSpecificationProduct Name:Refrigerator ThermostatModel:TR(TW)711/NIITemperature Range:-30~+30°Voltage Rating:AC 250V 16A AC 380V 2AThis refrigerator thermostat ideal replace for your damaged thermostat.Probe Size:110 x 6.5mm / 4.3inch x 0.26inch (L*Max.D)Dial Diameter:43mm / 1.69inchTotal Size(Included Pin):63 x 51 x 48mm / 2.5inch x 2inch x 1.9inch(L*W*T)Material:Metal, PlasticColor:As ShownNet Weight:110gPackage1 x …
Freezer -30~+30 Degree Celsius AC 250V 16A AC380V Temperature Capillary thermostatRead More
UNO R3 ATmega16U2 AVR USB Development Board with Housing
$22.06Motherboard & Development BoardAdd to cartUNO R3 DescriptionThis UNO R3 board is 100% compatible with original one, now it has perfect quality and performance .This is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. It can be used to develop stand-alone interactive objects or can be connected to …
UNO R3 ATmega16U2 AVR USB Development Board with HousingRead More
5pcs 315MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$48.68Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:315MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes5 x Wireless 3000m …
5pcs 315MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
40Pcs Round Laser Engraving Wooden Slices Sheet with 40 Iron Loop Set for Birthday Reminder DIY Hanging Wood Plaque Decorations
$9.02Engraving & Cutting MaterialsAdd to cartSpecificationMaterial:Wood Color:BurlywoodQuantity:40PcsFeatures1. Delicate detailed crafts and precise cutout.2. Great home wall decoration.3. You should never miss a birthday, anniversary or festival like Mothers’ Day, Fathers’ Day with this unique family board.4. Easy to joint the wooden discs together and easy to hang them on a plaque calender.5. Creative birthday and important day reminder.Great gift for …
2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPI
$3.60Smart ModuleAdd to cartMore document click to download:2.4G NRF24L01FeaturesThis module uses the domestic RF bonding chip BK2425, which integrates all the high-speed signal processing parts related to the RF protocol. Since the link layer is fully integrated on the module, it is very easy to develop. Automatic detection and automatic retransmission of lost data packets, retransmission time and …
2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPIRead More
OPT101 Illumination Sensor Light intensity Sensor Module Monolithic Photodiode
$6.55Sensor & Detector ModuleAdd to cartFeatureThe OPT101 is an illuminance photosensor that integrates a photodiode and a specially optimized op-amp. The transparent package allows the photodiode to have a larger sensing surface with higher sensitivity and a wide spectral response range (infrared to visible light 300nm-1000nm).ParameterWorking voltage:2.7 ~ 36VWorking temperature:0°C~70°CPhotodiode light irradiation area:5.2mm2Photocurrent:0.45A/W (λ = 650nm)Output voltage ratio:0.45V/uWAnalog voltage output …
OPT101 Illumination Sensor Light intensity Sensor Module Monolithic PhotodiodeRead More
Reviews
There are no reviews yet.