ESP8285 ESP-1 Serial Wireless WiFi Transmission Module with ESP8266
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The WiFi module ESP-1 is manufactured by using a high-performance chip ESP8285.
This small chip is encapsulated an enhanced Tensilica’s L106 diamond series 32-bit kernel CPU with a SRAM.
Thus, ESP8285 has the complete function Wi-Fi function; it not only can be applied independent but can be used
as a slaver working with other host CPU. When ESP8285 is applied as a slave, it can start from the onboard Flash.
The built-in high-speed buffer is not only benefiting improve the system performance but optimizing the store system. In addition, ESP8285 can be used as Wi-Fi adapter by SPI/SDIO or I2C/UART interface, when it is applied to other MCU design.
, please visit this GitHub link to get the manual and tools, https://github.com/Smart/SZDOITWiKi/wiki/ESP8285—ESP-1
Features
Ultra-small size;
Support serial to WiFi;
Wireless transparent transmission;
Long distance transmission with ultra-low power;
Support outboard antenna;
Bearing high temperature to 125 →, compared to the 85→ for ESP8266.
Working temperature:-40→-125→
Module size:24.5mm*14mm;
SOC characteristics
Built-in Tensilica L106 ultra-low power consumption 32-bit CPU, the main frequency can be
80MHz and 160MHz, also support RTOS;
Built-in TCP/IP protocol stack;
Built-in 1 channel 10-bit high precision ADC;
The outside interfaces have HSPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO;
The deep-sleep current is about 10uA, and the cut-off current is smaller than 5uA;
Can be wake-up within 2 ms, and connect to transmit data package;
the consumer power is smaller than 1.0mW (DTIM3) when at standby status;
built-in 1M byte for SPI Flash.
Wi-Fi characteristics
Support 802.11 b/g/n/e/i
Support three modes:Station, SoftAP, and SoftAP+STA;
Support Wi-Fi Direct(P2P);
Support hardware acceleration for CCMP (CBC-MAC, computation mode), TKIP (MIC, RC4),
WAPI(SMS4), WEP(RC4), CRC;
P2P find, P2P GO mode/GC mode and P2P power management;
WPA/PA2 PSK and WPS;
Support 802.11 i security:pre-certification and TSN;
Support 802.11n (2.4 GHz);
802.1h/RFC1042 frame encapsulation;
Support seamless roam;
Support AT remote updation and cloud OTA updation;
Support SmartConfig function for Android and iOS device SmartConfig.
Peripheral for Module
1*UART;
1*En;
MAX 4* GPIOs;
Application
Serial Transparent transmission;
WiFi probe;
Smart power plug/Smart LED light;
Mesh networks;
Sensor networks;
Wearable electronics;
Securit ID label;
Wireless location recognition;
Wireless location system beacon;
Industrial wireless control.
Package included
1 x ESP8285 ESP-1 Serial Wireless WiFi Transmission Module
Weight | 0.006 kg |
---|
Customers Also Viewed
5pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$43.42DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
CE034 DC 5V 12V 24V Bluetooth Relay Android APP Mobile Phone Remote Control Optical isolation Switch for Motor LED Light Lock NET Smart Home
$29.51Smart ModuleAdd to cartDocument click to download:CE034Description– Operating voltage:power supply 1, DC 6-25V; power supply 2,C 5V– Operating Current:Standby 11MA, Relay Open 45MA (voltage DC 12V)– Bluetooth:V2.1 EDR, Class 2– 2.4GHz-2.48GHz unlicensed ISM band– Send commands via Android Bluetooth APP control relay turned on and off (we provide Bluetooth APP, you can also use your own APP to …
3pcs 5 Pin Relay 12V DC 20A Coil Power Relay SRA-12VDC-CL
$3.79Electronic Accessories & SuppliesAdd to cartFeatureRelay is an electrical control device, typically used in automatic control circuitIt is actually a small current to control a large current operation of the automatic switchIt plays a role in the automatic adjustment circuit, safety protection, conversion circuitModel:SRA-12VDC-CLParameters:12V 20ADimensions:15 x 11 x 13mmPackage included3 x Relay
5Pcs Digispark Pro Kickstarter Development Board USB Micro ATTINY167 Module
$48.34Motherboard & Development BoardAdd to cartDescription1. Compatible with IDE 1.5 (OSX/Win/Linux)2. Fully signed drivers and executable for easy installation3. USB programming, USB device emulation, USB-CDC virtual serial port emulation4. 16 MHz AVR MCU – using a true 16Mhz precision crystal5. 16KB Flash Memory (14.5K+ after bootloader)6. Serial over USB debugging and communication!7. 14 I/O Pins (2 shared with USB)8. I2C, …
5Pcs Digispark Pro Kickstarter Development Board USB Micro ATTINY167 ModuleRead More
5pcs ESP-F1 Wireless WiFi Module ESP8266 Serial WiFi Module
$26.81Smart ModuleAdd to cartFeaturesESP-F1 module core processor uses high cost performance chip ESP8266EX. The chip integrates the industry-leading Tensilica’s L106 ultra-low power 32-bit micro MCU with 16-bit streamlined mode, 80 MHz and 160 MHz main frequency support and RTOS support in smaller size packages. ESP8266EX has a complete Wi-Fi network function, which can be used independently and run …
5pcs ESP-F1 Wireless WiFi Module ESP8266 Serial WiFi ModuleRead More
Waveshare RS485 SP3485 RS485 to TTL Communication Module Transceiver 3.3V Converter Board
$11.26Converter BoardAdd to cartFeatureFunction introduction:3.3V RS485 transceiverMain features:3.3V power supply, supporting multiple communication bus interfacesTypical application:RS485 communication based on 3.3V systemMain resources:SP3485 / MAX3485, control interface, communication bus interfaceDocumentsSchematic:Click here to openSample tutorial:Click here to openPackage includes1 x Converter Board
TSL2591X Light Sensor with PH2.0 5PIN Cable 600M:1 Wide Dynamic Range 88000Lux I2C interface 3.3V 5V Sensor for Raspberry Pi
$16.36Raspberry Pi & Orange PiAdd to cartFeaturesWork with TSL25911FN,Compatible with Infrared Ray and Human Visible Light (Better than TSL2561)Built-in ADC, Directly Output through I2C Interface, Great Anti-interference PerformanceLevel of Sensitivity up to 188uLux 600M:1 Wide Dynamic RangeBuilt-in Infrared Photodiode and Bandwidth Photodiode.Accurate Measuring PerformanceWith Interrupt Output,Upper and Lower Threshold Could Be ProgrammedElectric Level Switch Circult IncludedSpecificationsSensor:TSL25911FNCommunication Interface:I2C (Address:0x29)Range:0-88000LuxWorking Voltage:3.3V/5VSize:27x20mmFixing Hole Diameter:2mmFor …
Reviews
There are no reviews yet.