5pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$16.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
5 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.135 kg |
---|
Customers Also Viewed
1pcs AS15-G AS15G TQFP-48 Chip IC
$4.36Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionType:AS15-GQuantity:1Package included1 x AS15-G AS15G QFP48 Chip IC
18W 1PCS Aquarium Filter Aquarium internal Filter Oxygen Submersible Water Pumps for Fish Tank Pond Aquarium Filters
$48.59MathematicsAdd to cartSpecificationsModel:1280FMaterial:ABSFlow 1300 L/H ,Cable length:1.1MMaximum lift:1.2mOxygen tube length:0.34MFit For fish tank:≤80cmColor:As Picture ShowPower Consumption:18WWeight:639gFeatures-Removable filter box, easy to replace the filter material.-Adopt high quality and firm ABS shell, durable, freshwater and sea water are suitable.-Small size, easy to hide, at the same time filtering, oxygen, pumping and other functions.-With biological filtration cotton in the filter …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD Display
$55.43Other Module BoardAdd to cartDescriptionThis module is a multichannel current signal generator that generates 4 channels 4~20mA current signal. The module is simple to use and input data by keystroke operation, and the output signal is updated immediately.FeaturesUse 12864 LCD displayVoltage:15-24VActive output current 0~20mA. Display resolution 0.01mA and control accuracy 0.1mAPolarity protection of input voltageCan analog transmitter outputCompatible for …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD DisplayRead More
20pcs LM393 DC 5V Optoelectronic Sensor PIR Sensor Module with LED instruction Slot Single Signal
$23.96Sensor & Detector ModuleAdd to cartSpecificationsThe distance between PCB two circular hole (point to point center) is 1.5cm, and the aperture is 0.3cm.Slot type optocoupler slot width:10mmMain chip:LM393, slot type optocoupler H2010Working voltage:DC 5VSize:32mm x11mm x 20mmCharacteristic1. There is a signal output indication.2. Single signal output.3. When the object is blocked, the output is high level (LED lights out), and …
DIY Digital Display LED Logic Pen Electronic Kit High and Low Level Test Circuit Soldering Practice Board Kit
$4.36DIY Electronic KitsAdd to cartDescriptionPower supply:DC 4.5-5VBoard size:3.5 * 5.5cmLow-level judgment voltage:0.0-0.4VHigh-level judgment voltage:3.3-5VPackage included1 x DIY Digital Display LED Logic Pen Electronic Kit
Reviews
There are no reviews yet.