3pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$10.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
3 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.081 kg |
---|
Customers Also Viewed
30pcs EQKIT Electronic Funny Kits Voice Control LED Melody Light DIY Kits Production Suite Small Electronic Learning Electronic Kits
$56.32DIY Electronic KitsAdd to cartDescriptionVoltage:3-4 .5 VPCB material:FR-4 fiberglass boardDimensions:34 * 34MMPackage included30 x Voice Control LED Melody Light DIY Kits
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model B
$58.27Raspberry Pi & Orange PiAdd to cartOverviewThis is a new design ABS case to protect your Raspberry Pi 4 Model B computer, and it is only comepatible with your Raspberry Pi 4 Model B, not support other versions. Also support install a dc 5v cooling fan. The GPIO pin interface is available to us if you do not install the cooling …
10pcs Transparent Protective ABS Case Support Cooling Fan for Raspberry Pi 4 Model BRead More
10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25
$13.11Electronic Accessories & SuppliesAdd to cart10pcs Roller Lever Arm Micro Switch AC 250V HV-156-1C25DescriptionSize:27.8 x 10.3 x 15.9mmRoller Diameter:4.75mmLever Length:28mmRating:15A AC250VWithstand Voltage:AC1, 0000V 1 MinuteInsulation Resistance:100mΩ DC500VContact ResistanceSoldering Temperature:250°C Max 3 sec.Ambient Temperature used:-25°C to +80°CAmbient Humidity UsedOperating Force:160Part number is HV-156-1C25Package included10 x Micro Switch
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal Sensor
$168.06SwitchesAdd to cartFeatures-This wireless tire pressure monitoring system comes with four built-in sensors and a digital monitor to monitor the tire pressure/temperature-By employing the advanced wireless sensors which highly integrated pressure and temperature sensor, we provide the amazing and reliable TPMS for you-Oil will be decreased when tires work under lower pressure, this item can reduce fuel …
Solar TPMS LED Wireless Tire Pressure Monitoring System with 4 internal SensorRead More
Deek-Robot W-1213 intelligent Digital Display Fish Tank Climbing Pet Greenhouse Planting Hatching and Breeding Temperature Controller
$26.23Test & Measuring ModuleAdd to cartProduct parameterProduct name:Intelligent temperature controllerProduct model:W-1213Power supply voltage:AC110-220VWorking frequency:50HZTemperature range:-40C~+120CTemperature measurement accuracy:÷0.5CSensor cable length:100CMSize:79.5*43*35mmShell material:surface shell ABS, bottom shell flame retardant ABSBattery:CR1220 3V button battery(not included)Display panel descriptionHeat (corresponding icon display):heating mode, in heating mode, heating the relay works.Cool (corresponding icon display):Cooling mode, in cooling mode, cooling the relay works.Timer:Timer switch, in timer mode, the …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson Nano
$54.66Smart ModuleAdd to cartFeaturesSupports NVIDIA Jetson Nano Developer Kit, Compute Module 3/3+8 MegapixelsSensor:IMX219Resolution:3280 ≠ 2464Lens specificationsCMOS size:1/4inchAperture (F):2.35Focal Length:3.15mmAngle of View (diagonal):160 degreeDistortion4 screw holesUsed for attachmentProvides 3.3V power outputDimension:25mm ≠ 24mmApplicationsCombined with the Jetson Nano AI computer, this camera suits for AI projects such asFace recognitionRoad mark detectionLicense plate recognitionPackage includes:(the Jetson Nano does not includes)1 x …
Waveshare IMX219-160 Camera 160 Degree Field of View 8 Million Pixels for Jetson NanoRead More
10Pairs MC4 Connector Male And Female MC4 Solar Panel Connector 30A 1000V for PV Cable 2.5/4/6mm Solar Panel Connect
$26.23Electronic Accessories & SuppliesAdd to cartSpecificationArticle number:MC4Rated voltage 1000 VRated impulse voltage:1000 VTest voltage:6 kV (50Hz)Suitable for cables:10, 12, 14 AWG (2.5mm2 / 4mm2 / 6mm 2;)Rated current:24 A-14 AWG (2.5mm 2;), 30A-12 and 10 AWG (4mm 2; and 6mm 2;)Protection class:IP67Contact material:copper, silver platedInsulation material:PC / PAOperating temperature:-40 ° C + 90 ° CThe security class:IIFlame Class:UL94-V0Contact resistance:≤5mΩInsertion / …
Reviews
There are no reviews yet.