20pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$54.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
20 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.54 kg |
---|
Customers Also Viewed
5065cm Engraving Area Laser Engraving Machine DIY Kit Desktop Laser Cutting Printer-without Laser Module
$356.97Laser Engraving MachineAdd to cart1. Benbox Software & Manual:Click to download2. Assembly Instructions, please check:http://myosuploads3.hobbyant.com/products/20190326/201903260314326550.zipDescriptionThis DIY desktop blue laser engraving machine is ideal for amateurlaser engraving usage with grayscale printing,low-light positioning and freedompositioning functions.It only need you to connect it to the computer,then you canprint any pictures your like with your own creativity.SpecificationsMaterial:stainless steel and acrylicWorking Voltage:DC 12VEngraving Area:65x50cm(maximum)Size:72x63cmControl …
3pcs 0.36 inch DC0V-32V Red LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$10.64Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
120A Amplifier Rectifier Filter Supply Power Board High Power Schottky Rectifier Filter Power Supply Board 10000uf 125V
$109.34Other Module BoardAdd to cartSpecification – Power board with double-sided tinplate PCB board, 8 H-itachi 10000uf 125V capacitor, 4 original import disassemble Schottky 30A150V equivalent to 120A bridge heap!– Schottky’s characteristics are fast, small internal resistance (pressure drop naturally low),So the original rectifier than the original power amplifier for the high demand for power.– Input power:Maxmium Double AC 60V(60V-0-60V)– …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop Fan
$153.89Solar CollectorsAdd to cartFeaturesThe fan runs when plugged to the solar panel. And it can be used alone by plugged into computer USB port.When plugged to the solar panel, how the fan works depends on the sunlight.When the sunlight is strong, the fan works fast. When the sunshine is not strong enough, the fan may work low or …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop FanRead More
10pcs DC 12V 6A 3 String Battery Protection Board Panels Solar Street Lights
$29.51Other Module BoardAdd to cartDescriptionSize:56x45x3mmContinuous working current:Within 6ACharge current:Within 6ABalance charging:YesShort circuit protection:YesFunction:Prevent overcharge, overplay, circuit protectionSuitable assembly:Nominal 3.7V electric core / three stringsPackage Included10 x 12V Battery Protection Board
Practical CPU info 1.6 inch 84×48 Matrix LCD Memory Display Module with Backlight for Raspberry Pi
$20.80Raspberry Pi & Orange PiAdd to cartFeatures∵ 1.6 inch, 84 x 48 pixels matrix LCD∵ Through the Raspberry Pi internal C programming, to Pi running on the CPU occupancy rate and memory occupancy rate display on the LCD screen, be clear at a glance∵ Can be programmed to show what you want to display∵ A backlight jumper back through the software …
Reviews
There are no reviews yet.