10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
3 x 100pcs RM065 Horizontal Trimpot Potentiometer Assortment Kit with Storage Box
$33.28Electronic Accessories & SuppliesAdd to cartSpecificationsModel Number:RM065Operating Temperature:-5 °C to +70 °CTechnology:Carbon FilmType:Trimming PotentiometerRated Power:0.1WResistance Tolerance:±20%Max. Operating Voltage:50VResistance:100 ohm-1M ohm (Variable Resistor)Package included3 x 100pcs 10 Values RM065 Horizontal Trimpot Potentiometer Assortment Kit
ICE-Tower CPU Cooling Fan V2.0 Super Heat Dissipation Different Colors LEDs for Raspberry Pi 3B+/4B
$46.37Raspberry Pi & Orange PiAdd to cartDescriptions1. According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.2. Higher processing performance will generate more heat. 3. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! 4. Tower structure, 5mm copper tube, multi-layer heat sinks, …
20pcs WITRN-CC001 TYPE-C Male to Female Connector TYPE-C Adapter Board Test Fixture Module
$201.72Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesAll interfaces of TYPE-C adapter board are led out, all interfaces are independent, which is convenient for TYPE-C development and debugging.Package Included20 x WITRN-CC001 TYPE-C Adapter Board
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyC
$34.70Other Module BoardAdd to cartDescriptionSG90 servo is a M5Stack custom 9g servo.The angle of rotation is 0°~180°,it can be used with 8Servos HAT and PuppyC.This small servo is very easy to use for beginners. You don’t have to use a dedicated drive board with feedback control,Any common servo driver and microcontroller can easily turn it up.Compared to driving a …
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyCRead More
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 Heads
$87.06Switch AccessoriesAdd to cartFeatures1. Perfect Multiple Cleaning Tasks — Automatic cleaning scrubber can be used indoor and outdoor, it’s great for curves, tile, sink bowls, toilets, bathtub, door slots, shower windows, it also cleans car tires and mags well.2. Harsh and Abrasive Cleaners — Our flexible bristles mold into cracks and crevices, corners, and shower tracks for a …
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 HeadsRead More
Reviews
There are no reviews yet.