10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
3pcs 1000 KV Pulse Ignition Coil inverter Arc Generator
$27.05Electronic Accessories & SuppliesAdd to cartSpecificationsModule type:MC-901Input voltage:3.7V-7.4V (18650 rechargeable lithium battery)Input current:0.5A-1AInput wire length:9 cmHigh voltage type:pulse DC typeOutput voltage:800KV-1000KV (please pay attention to safety when using)Output current:0.5A-1AOutput length:approximately 16 cmHigh voltage bipolar discharge distance:1.5 cm -2 cmSize:88 x 26mm(LxD)Module use note1, high voltage module should avoid the use of high voltage no-load, power must be adjusted before the …
3pcs 1000 KV Pulse Ignition Coil inverter Arc GeneratorRead More
10K-2G 0.1-2000M LNA Broadband RF Amplifier Gain 32dB@0.5G Signal Receiver FM HF VHF / UHF Ham Radio
$21.86RF amplifierAdd to cartFeatures1, the supply voltage:DC9-15V, typical + 12V (typical current value 35mA)2, gain:the typical value of 32dB@0.5G input and output impedance:50 ohms3, the maximum output power:P1db 11dBm (@ 0.5G4, the input signal5, bandwidth:10K-2GHZ (gain different at different frequencies, please refer to the specific S21 curve indicators)6, the noise figure:2dB@0.5GPackage included1 x 10K-2G 0.1-2000M LNA Broadband RF …
Wood Heating Stove Door Gasket Round Fiberglass Rope Seal High Density Fibreglass Strips Rope
$22.67FabricsFibers & TextilesAdd to cart2m 9.5mm High Density Fibreglass Rope Wood Fire Stove & Heater Door Seal 550°CSpecificationType:Fibreglass RopeColor:WhiteMaterial:FibreglassFire-resistant temperature:550 (°C)Tear strength:300Compressive strength:100Tensile strength:300Elongation at break:100Size:approx.9.5mm*2m(1cm=10mm=0.39inch)Measurement Details in the attached picture.Package Included1X Fibreglass RopeFeatureIt is tough, durable and strong yet flexible enough to make installation as a door seal easy.Our Fibreglass Rope has a maximum operating temperature of 550°C. …
5Pcs Yushun LS-5S 5V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$31.98Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:5V1A LS-5S5Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:5VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:1AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
3pcs AC110V/220V to DC5V 40A 200W Switching Power Supply 200*110*50mm
$126.89Power Supply ModuleAdd to cartTechnical ParametersProject:Technical indicators:Remarksbasic requirements:5V 40A 200W:Common (No fan)Dimensions:200*110*50mmOperating temperature:-10°C to +50°C, 20% to 95% RH (no condensation)Storage temperature:-20°C to +85°C, 20% to 95% RH (no condensation)Temperature Coefficient:0.02~0.05%/°CHeat dissipation method:Natural coolingRated voltage range:220VAC:ACInput voltage range:110/240V:ACInput frequency range:50 to 60 Hz:Except DC inputInput undervoltage protection:115 to 150% intermittent modeInput undervoltage recovery:Automatic recoveryInput overvoltage protection:115 to 150% intermittent …
3pcs AC110V/220V to DC5V 40A 200W Switching Power Supply 200*110*50mmRead More
4 Password Key Lock Storage Box Wall Mount Holder Combination Safe Parts Organizer with 2 Keys
$103.26Switch AccessoriesAdd to cartSpecificationsMaterial:Aluminium Alloy, Zinc alloy, Good quality steel plateColor:Shown as pictureOuter Size:Approx. 148mm*130mm*55mmInner Size:Approx.110mm*90mm*45mmPackage Weight:Approx.859gProduct Net Weight:Approx.777gFeatures-Durable material. Heavy duty aluminium alloy construction protects the box from being damaged by hammer, saw, drill and so on, impact-resistant, non-corrosive and weather-resistant.-High security. This product is an adjustable combinations lock with 4 dials. It can be converted to …
10Pcs IIC / I2C 1602 Blue Backlight LCD Display Screen Module
$52.97Display ScreenAdd to cartDifferent color display for you to chooseIIC I2C 2004 Blue display:Product ID:908616IIC I2C 1602 Blue display:This itemIIC I2C 1602 Yellow Green display:Product ID:950728IIC I2C 1602 Yellow-Green with housing:Product ID:1220588IIC I2C 1602 Blue with housing:Product ID:1220628ParameterPower supply voltage:+5 vSupport the I2CWith the Blue backlight, and contrast to adjust potentiometerFour line output more simplerIIC addressChip:8574AT 0x3FChip:8574T 0x27Wiring …
10Pcs IIC / I2C 1602 Blue Backlight LCD Display Screen ModuleRead More
3pcs DC8V-35V To 5V 8A Power Step Down Module 4-Port USB Mobile Phone Car Charger Support Fast
$32.63Power Supply ModuleAdd to cartFeatures1. 4 independent dedicated charge management IC, can effectively support a variety of mobile phones for maximum current charging, charging speed, safe and reliable.2. The charge identification IC is compatible with Apple’s full range of Android products. The vast majority of mobile phones can achieve the fastest charging speed.3. Supports 4-channel USB for simultaneous 2A …
Reviews
There are no reviews yet.