10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
2 Channel Relay Module 12V with Optical Coupler Protection Relay Extended Board
$6.55Relay ModuleAdd to cartDescriptionDimensions:50.6 x 38.8 x 19.3mm (L x W x H)Weight:30gThe board is surrounded by four fixed screw holes with a diameter of 3.1 mm, which is convenient for installation and fixing.High quality relay, single-pole double-throw. One common end, one constant beginning, one constant closing end.Photocoupler isolation, good anti-interferenceLow level suction, high level release. The state …
2 Channel Relay Module 12V with Optical Coupler Protection Relay Extended BoardRead More
3pcs TB371 4 Key MCU Keyboard Button Board Compatible UNO MEGA2560 Pro Mini Nano Due for Raspberry Pi Teensy++ Geekcreit for Arduino – products that work with official for Arduino boards
$9.06Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description1. 4-button Common Cathode key module(When pressed output low level). 2. GND K1 K2 K3 K4′ 4 PIN OUT 2.54mm3. Working voltage:DC 0-48V 4. Size:12.7 x 33mm5. It can be inserted directly …
DC 12V/5V MP3 Decode Board LED USB AUX FM bluetooth Radio Amplifier with Remote
$15.30Amplifier BoardAdd to cartDescriptionStereo bluetooth 12V/5V lossless WAV music decoder, WMA / MP3 / FM speaker panel modules, support breakpoint memoryFeatures1. Support USB, SD, support for external signal directly switch2. Support for stereo bluetooth (bluetooth3.0EDR)3. Support USB / SD / bluetooth / FM / LINE switch automatically.4. Support MP3 / WMA / WAV lossless songs.5. Support USB / …
DC 12V/5V MP3 Decode Board LED USB AUX FM bluetooth Radio Amplifier with RemoteRead More
Professional Reflector Astronomical Telescope + Adjustable Tripod Science Education for Gift
$91.11PhysicsAdd to cartSpecificationProduct Name:TelescopeModel:E31375Size:56x74x15.7cm/22×29.1×15.7inColor:MulticolorObjective Focal length:600mmClear aperture:50mm (2 ″)Scope:4 * 18Field of View:1 degreeFinder Scope Magnification 3xEye-Piece Magnifications:F=6mm for 100x magnification and F=12mm for 50x magnificationNote:With the H6 eyepiece (100 times), you can see the craters and craters of the moon, and you can observe sunspots with special sunglasses. H12 eyepieces (50x) can be used as 50x …
TTL to RS485 Module Hardware Automatic Flow Control Module Serial UART Level Mutual Converter Power Supply Module 3.3V 5V
$4.36Converter BoardAdd to cartFeatures(1) The module is fully considered mine design, long-distance transmission signal 485 in the wild, the module inchConnected to the groundinch terminal is connected to the earth, can play a very good anti-jamming and anti- effect, more secure; it can not connect with the ground when the indoor short-distance transmission. (2) Using the standard 2.54 …
30pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$10.48Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included30 x Solid Capacitors
Reviews
There are no reviews yet.