10pcs Electronic DIY LED Dimming Lights Series and Parallel Circuit Technology Small Production Kit
$29.32
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The purpose of the experiment
1. Understand and recognize the light-emitting diodes and illuminate the light-emitting diodes (LEDs);
2. Understand the role of understanding resistance, series and parallel resistance;
3. Understand the self-locking switch;
4. Understand and recognize adjustable resistors and use adjustable resistors;
Experimental steps
Step 1:The long leg of the light-emitting diode (LED) is the positive pole, and the short leg is the negative pole. First, the long wire of the LED is connected to the black wire (negative electrode) of the battery case, and the short leg of the LED is connected to the red wire (positive electrode) of the battery case. At this time, the light emitting diode (LED) is not lit. Then send it over again, let the long leg of the LED connect to the red line of the battery box, and the short leg of the LED is connected to the black line of the battery box. At this time, the LED lights up, indicating that the LED is in one-way operation and the single-pass characteristic of the diode .
Step 2:In the circuit of the experimental step 1, a resistor of 220 ohms is inserted in series, and the brightness of the LED lamp is lowered, and the resistance hinders the current.
Step 3:Connect a 220 ohm resistor in parallel with the resistance in the circuit of the experimental board 2. The brightness of the LED is increased, indicating that the total resistance of the resistor in the circuit is reduced after the resistors are connected in parallel.
Step 4:Change the two resistors of the experimental step 3 from parallel to series. After the series connection, the brightness of the LED lamp is the lowest. After the series connection of the resistors, the total resistance of the resistor in the circuit increases.
Step 5:Replace the original resistor with a potentiometer. The potentiometer has 3 feet, and the resistance of pins 1 and 3 is fixed. The resistance of pins 1 and 2, 2 feet and 3 feet can be changed by adjusting the potentiometer knob. When experimenting, you can pick up 2 of them. The foot has to experiment many times, adjust the potentiometer knob to observe the change of LED brightness, so that you can fully understand the potentiometer.
Step 6:Know the self-locking. Press and wait for the light to be on, then press the light to turn off.
Package included
10 x DIY LED Dimming Lights Technology Small Production Kit
Weight | 0.27 kg |
---|
Customers Also Viewed
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220V
$35.99Relay ModuleAdd to cartFeaturesWith isolation groove in control area and load area.With power and relay action indication, bright when connect and go off when disconnects.When there is a signal in signal input, public side and common side will breakover.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can …
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220VRead More
10pcs DC 3V Watering Small Water Pump Silent Mini Water Pump
$26.77Other Module BoardAdd to cartFeatureAmbient temperature:-20 ° C ~ 60 ° CUse ambient humidityUse medium:water, non-flammable fluid liquidUse scene:medical, fountain, etc.Life:>=200H (continuous work)Motor model:140 type 5500RPM/MINModel:Voltage Scope (DC):Current (A):Power (W):Max. Water Head (M):Max. Flow Rate (L/H):Starting Voltage:Waterproof GradeJT-DC3W-3:3V:0.12:0.36:0.35:80:1:IP68Package includes10 x Water Pump
3Pcs I2C WiiChuck Nunchuck Small Adapter Shield Module Board
$6.63Sensor & Detector ModuleAdd to cartSpecificationWiichuck is a board for Wii-Nunchuck.Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck.It is grate for DIY projects.Dimensions:1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)Package includes3 x Adapter Module
5Pcs YS-U12S5H AC to DC 5V 2A Switching Power Supply Module AC to DC Converter 10W Regulated Power Supply
$37.17Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures-Universal voltage input:AC100-265V AC-With overload, short circuit, over temperature protection function-Full load aging test-Ultra low output rippleSpecificationsModel:YS-U12S5HOutput characteristics:Output voltage:5VRated current:2000mACurrent range:0-2000mARippleOutput accuracy:÷1%Voltage regulation rate:÷1%Load regulation rate:÷1%Rated power:10WAdjustable output range:/Setup, rise, hold time:300ms、20ms、20ms/220VACInput characteristics:Input voltage range:AC100-264VInput currentFrequency range:47Hz-63HzEffectiveness:>83.5%Start impact circuit:COLD STARTLeakage currentProtection characteristics:Over power protection:150-170% rated power, automatic recovery after fault removalOver voltage …
CBB60 5Pcs 50UF 450V Water Pump Motor Run Capacitor
$64.03Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 50UF 450V Water Pump Motor Run CapacitorRead More
20pcs ZFX-W1302 Digital thermostat Controller Temperature Controlling Temperature Meter for Automatic incubator
$172.94Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsModel:ZFX-W1302Material:PVCPower Supply:DC 9-24VTemperature Measurement:-50 C – 120 CTemperature Control:0 C – 110 CTemperature Control:0.1 CDisplay Color:RedSensor:NTC B3435 10KSensor Cable Length:1MSize:99 * 43 * 22.6mmSetting Steps1. Short press the ‘Set’ key, the screen …
Reviews
There are no reviews yet.