BESTEP 1 Channel 5V Relay Module 30A with Optocoupler Isolation Support High And Low Level Trigger
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The module adopts high quality 30A relay, and the maximum load is normally open interface:AC 250V/30A, DC 30V/30A;
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA;
Module working voltage:5V
Can be set up by high jumper or low level trigger.
Fault-tolerant design, the relay will not operate even if the control line is disconnected.
Power indicator (green), relay status indicator (red)
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:50mm x 33mm x 24mm (length * width * height)
Product net weight:36g
There are 4 fixed bolt holes, holes 3.1mm, spacing 44.5mm x 27.5mm
Relay version:5V
Quiescent current:5mA
Maximum current:190mA
Trigger current:2-4mA
Module interface description
1. DC+:module DC power supply positive pole (trigger terminal voltage positive).
2. DC-:module DC supply negative pole (trigger terminal voltage negative).
3. IN:signal trigger terminal (default trigger voltage is the same as power supply).
4. JD+:relay control terminal voltage positive pole
5. JD-:relay control terminal voltage negative pole
6. DC +/- and JD +/- uses jumper cap short connection, trigger terminal and relay control terminal voltage is the same.
7. Selection of high and low level trigger mode, when jumper is connected to L-terminal, IN-terminal is low level trigger, and H-terminal is high level trigger.
8. Normally closed terminal (NC):relay normally closed.
9. Public terminal (COM):common terminal of relay
10. Normally open terminal (NO):relay normally open.
Package Included
1 x 1 Channel 5V Relay Module
Weight | 0.036 kg |
---|
Customers Also Viewed
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck Module
$16.24Power Supply ModuleAdd to cart20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck ModuleFeaturesSize:8.6 x 12.33 mmInput voltage:DC 4.2 V – 10 VOutput:3.3 V, 800 mANote1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily!2.Boost module output voltage can only be greater than or equal to …
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck ModuleRead More
XD-37 12V 72W Electronic Semiconductor Refrigeration DIY Air Cooling System Small Air Conditioning
$35.52Electronic Accessories & SuppliesAdd to cartFeatures1. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.2. Application:Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.3. Use to Connect the pump and the power supply.4. Diy kits Thermoelectric Peltier refrigeration cooling system.Fast cooling, outstanding effect.5. Simple operation, strong practicability.DescriptionsNo noise, …
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
10pcs Mini 2A DC DC Buck Converter 3.3-5.5V to 3.3V Module Step Down Voltage Regulator Module
$30.16Boost & Buck ModuleAdd to cartDescriptionINPUT 3.5V/1.4A; OUTPUT 3.3V/1.5AINPUT 3.7V/1.89A; OUTPUT 3.3V/2AINPUT 4.2V/1.67A; OUTPUT 3.3V/2AINPUT 4.5V/1.46A; OUTPUT 3.3V/2AINPUT 5V/1.4A; OUTPUT 3.3V/2A Input voltage 3.3-5.5V, output 3.3V (deviation ±2.0%)Long time maximum output current 1.8AShort time maximum output current 2.2AUp to 97% efficiency(@4.2V to 3.3V/500MA)Low Quiescent Current:20uAOvertemperature shutdown, input under-voltage protection, External Soft start, and short circuit protection. DC-DC Buck Step-down module …
10Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$10.80Lab ChemicalsAdd to cartSpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:10 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included10 X 10ml Empty Plastic Bottle With Metal Needle
Reviews
There are no reviews yet.