Micro ATmega32U4 5V 16MHz Development Board
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The Micro ATmega32U4-MU is a tiny microcontroller board based on the ATmega32U4. It has 20 digital input/output pins (7 of which can be used as PWM outputs and 12 as analog inputs), a crystal oscillator, a micro-USB connection, an ICSP header and a reset button. With a 16 MHz frequency and 5V operating voltage, this board is similar to the Arduino Leonardo, although the Micro ATmega32U4-MU is more compact (17.78*48.26mm).
The board contains everything needed to support the microcontroller; you just have to connect it to a computer and get started! Its form factor enables it to be easily placed on the circuit board.
Like the Arduino Leonardo, the Micro ATmega32U4-MU has built-in USB connection, eliminating the need for a converter. This allows the Micro to appear to a connected computer as an HID-device, such as a keyboard or mouse, in addition to a COM-port. The board is also able to perform other Arduino Leonardo functions.
Power
The Micro ATmega32U4-MU can be powered via a USB connection.
Power Supply
5V:The regulated power supply used to power the microcontroller and other components on the board. This can come either from VIN via a voltage regulator, or be supplied via USB, or another regulated 5V supply.
3V3:A 3.3V supply generated by the on-board regulator. Maximum current draw is 50mA.
GND:Ground pins.
I/O Pins
Each of the 20 digital pins can be used as an input or output. They operate at 5V. Each pin can provide or receive a maximum of 40 mA, and has an internal pull-up resistor (disconnected by default) of 20-50 k Ohms. In addition, some pins have additional functions
— Serial interface:0(RX) and 1(TX) pins. Used to receive (RX) and transmit (TX) data using the ATmega32U4 hardware serial capability. Note that on the Micro ATmega32U4-MU, the Serial class refers to USB (CDC)-communication, for data transfer on pins 0 and 1, use the Serial1 class.
— TWI:2 (SDA) and 3 (SCL) pins. Support TWI (12C) communication using the Wire library.
— External interrupts:3 (interrupt 0), 2 (interrupt 1), 0 (interrupt 2), 1 (interrupt 3) and 7 (interrupt 4). These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt() function for details.
— PWM:3, 5, 6, 9, 10, 11 and 13. Provide 8 bit PWM output with the analogWrite() function.
— SPI:on the ICSP header. These pins support SPI communication using the SPI library. Note that the SPI pins are not connected to any of the I/O pins as they are on the Arduino Uno. They are only available on the ICSP connector.
— Analog inputs:A0 — A5, A6 — A11 (on digital pins 4, 6, 8, 9, 10 and 12). The Micro ATmega32U4-MU has 12 analog inputs (A0 — A11), all of which can also be used as digital i/o. Analog inputs A0 — A5 appear in the same locations as on the Arduino Uno; inputs A6 — A11 are on digital i/o pins 4, 6, 8, 9, 10 and 12, respectively. Each analog input provide 10 bits of resolution (1024 different values). By default, the analog inputs measure from 0 to 5 volts, though it is possible to change the upper end of their range using the AREF pin and the analog Reference() function.
— Reset. A low signal level resets the microcontroller.
LEDs
* RX and TX — flash when data is being transmitted via USB connection.
* ON — power indicator.
* L — LED connection to digital pin 13.
Memory
The ATmega 32U4 microcontroller has 32 KB memory (with 4 KB used by the bootloader). It also has 2.5 KB SRAM and 1 KB EEPROM (which can be read and written with the EEPROM library).
The Micro ATmega32U4-MU has a number of facilities for communicating with a computer, another Arduino device or microcontrollers.
The ATmega32U4 provides serial UART TTL serial communication, which is available on digital pins 0(RX) and 1(TX).
Having hardware support for USB, the ATmega32U4 also allows for serial communication with the computer over a virtual COM port.
The Micro ATmega32U4-MU also acts as a USB 2.0 device, using standard USB COM drivers. The Arduino software includes a serial monitor that allows simple textual data to be sent to and from the board. Which we will do in the example given under the description.
A SoftwareSerial library allows for serial communication on any of the ATmega32U4-MU’s digital pins.
The ATmega32U4 also supports I2C (TWI) and SPI communication. The Arduino software includes a Wire library to simplify use of the 12C bus. The SPI library can be used for SPI communication.
Programming
The board can be programmed with Arduino software, by selecting ATmega32U4 in the Board menu.
The ATmega32U4 microcontroller on the Micro ATmega32U4-MU comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.
You can also bypass the bootloader and program the microcontroller through the ICSP (In-Circuit Serial Programming) header.
Automatic Reset
Rather than requiring a physical press of the reset button before an upload, the Micro ATmega32U4-MU is designed in a way that allows it to be reset by Arduino software running on a connected computer. The reset is triggered when the virtual CDC COM port is opened at 1200 baud and then closed. When this happens, the processor will reset, breaking the USB connection to the computer. After the processor resets, the bootloader starts, remaining active for about 8 seconds. The bootloader can also be initiated by pressing the Reset button. Note that when the board first powers up, it will jump straight to the user sketch, if present, rather than initiating the bootloader.
USB Overcurrent Protection
The Micro ATmega32U4-MU has a resettable polyfuse that protects the computer’s USB ports from shorts and overcurrent. Although most computers have their own internal protection, the fuse provides an extra layer of protection. If more than 500mA is applied to the USB port, the fuse will automatically break the connection until the short or overload is removed.
Microcontroller:ATmega32U4-MU
Power Out:3.3V-180m
5V-800m
Power IN. USB:5V
Power IN. VIN/DC Jack:5V
Power Consumption:5V 220mA
Logic Level:5V
USB:Micro USB
Clock Frequency:16MHz
Operating Supply Voltage:3.3V
Digital I/O:20(7-PWM)
Analog I/O:12
Data RAM Type/Size:2.5Kb
Data ROM Type/Size:1Kb
Interface Type:ISP
Operating temperature:−40㎡°/+85㎡°
PCB size (L*W):48.26*17.78mm
Weight:8.5g
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Package includes
1 x Micro ATmega32U4 5V 16MHz Development Board
Weight | 0.015 kg |
---|
Customers Also Viewed
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 Mesh
$13.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Woven Wire Cloth Screen is widely used in acid and alkali environment screening andfiltration, barbecue nets, handicraft nets, food machinery nets, cooking nets.SpecificationMaterial:Stainless steelSize:15x15cm(6inchx6inch)Mesh:60ApplicationWidely used in acid and alkali environment screening and filtration, barbecue nets, handicraft nets, foodmachinery nets, cooking nets, can also be used for solid material classification filtering, liquid and …
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 MeshRead More
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier Board
$47.10Amplifier BoardAdd to cartDetails1. The Bluetooth core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip. DAC adopts imported PCM51022. The electrolytic capacitor adopts the gold word SANYO 470UF/16V electrolytic capacitor to ensure strong and continuous power support.3. High-precision chip resistors are selected for the resistors to ensure a good …
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier BoardRead More
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM IC
$23.68Electronic Accessories & SuppliesAdd to cart10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROMFeatureSuitable for microprocessor systems requiring large data or program storage.It is organised as 2 M Words of 16 bit. The pin-out is compatible with a 32 Mbit Mask ROM.The FDIP42W has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the …
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM ICRead More
120pcs 2.8 4.8 6.3 insert Plug Spring Sheathed Wire Terminal Connector Cold Pressed Terminal 0.5-2.5mm2 Connector
$7.32Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionName:2.8mm Spring ConnectorsMode:DJ622-2.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:4.8mm Spring ConnectorsMode:DJ622-4.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:6.3mm Spring ConnectorsMode:DJ622-6.3Applied Wire Diameter:1.0-1.5mm2Material:Brass tinned(Sheath:flame …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$18.21Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
Geekcreit ESP32 WiFi+bluetooth Development Board Ultra-Low Power Consumption Dual Cores Pins Unsoldered
$15.30Smart ModuleAdd to cartDescriptionESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module.The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and …
RF Envelope Detector Amplitude Detection Discharge Signal Detection Module
$19.67RF amplifierAdd to cartDescriptionThis product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.The envelope detection principleFeature1. Maximum input:20dBm2. Detection output:The default is positive3. Working Frequency:0.1-3200MHz4. RC Filter:R = 10K, C = 1nF; (two elements in parallel …
RF Envelope Detector Amplitude Detection Discharge Signal Detection ModuleRead More
ZPHS01 All-in-one Gas Detection Module Carbon Dioxide Dust PM2.5 Sensor PM2.5 + CO2 + VOC + Temperature + Humidity Detector
$129.99Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.NoteThis is PM2.5 + CO2 + VOC + Temperature + Humidity PM2.5 + CO2 + CH2O + Temperature + Humidity ID:1680902OverviewThis is an all-in-one module integrating VOC sensor, laser dust sensor, infrared …
Reviews
There are no reviews yet.