SSY DIY Creative Clock Kit Night Light Clock Electronic Education Kit Digital Tube Set
$21.86
Color. Green / Color. Blue / Color. Red /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The kit uses 5V power supply
13 kinds of LED switching animation
With seconds reset function
Can set alarm
With temperature display, can set temperature display or not
With light control function, light control switch can be set
Color:Red, Blue, Green(just the digital tube color)
Tutorial
1. Press the setting key for the first time, and the setting minute display will be displayed. At this time, every time you press the No. 2 key, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. Just fine.
2. After setting the minutes, press the set button for the second time to enter the setting. At this time, each time you press the plus button, the displayed time will increase by 1 and the value is between 0 and 23. According to the current time, set The corresponding value is sufficient.
3. After setting the time, press the set button for the third time, and then enter the reset setting of seconds. At this time, the current seconds will be displayed and the seconds will change. At this time, every time you press the plus button, the seconds will be reset to zero. If the user can set the number of seconds according to the actual time, when the seconds of the actual time becomes 00, press the plus key to set the seconds. (When setting the minutes, set the minute to one minute more than the actual number, that is, the actual 50 minutes, set to 51 minutes. This is only when the seconds are reset to zero.
accurate)
4. Press the Set button for the fourth time to enter the alarm minute setting. At this time, every time you press the No. 2 button, the displayed value will increase by 1 and the value is between 0 and 59. According to the current time, set the corresponding value. can.
5. Press the setting key for the fifth time to enter the setting of the alarm clock. At this time, each time you press the plus key, the displayed time or 1 is increased, and the value is between 0 and 23. According to the current time, the corresponding value is set. can.
6. Press the set key for the 6th time, the current digital tube will display inch1-00inch, at this time enter the alarm function on or off setting, press the plus key to turn on or off, 1-00 inchmeans off,inch 1-11 inchMeans on)
7. Press the setting key for the seventh time, the current digital tube will display inch2 00inch, at this time enter the light control function on or off setting, press the plus key to turn on or off (inch2 00inch means off, inch2 inch11inch means open)
8. Press the setting key for the 8th time, the current digital tube will display inch3 00inch, at this time enter the temperature display function on or off setting, press the plus key to turn on or off (inch3 00inch means off, normal display The screen will always display the current time, inch3-11inch means on, and the normal display screen will switch between clock and temperature cycle display)
9. Press the Set key for the ninth time to return to the normal display screen
10. In the normal display screen, every time you press the plus key, the LED animation effect will switch once.
Note
It is DIY Kit, Need to assemble yourself.
R1 and R2 is 0805 10K resistor
R3-R11 are 0805 1K resistor
Package included
1 x DIY Clock Kit
Weight | 0.2 kg |
---|
Customers Also Viewed
OpenMV OpenMV3 4 2 Camera Module M7 H7 LCD Expansion Board Display Screen Module
$50.02Display ScreenAdd to cartnullFeatureThe LCD Shield gives your OpenMV Cam the ability to display what it sees on-the-go while not connected to your computer. It features a 1.8inch 128×160 16-bpp (RGB565) TFT LCD display with a controllable backlight. Your OpenMV Cam’s firmware has built-in support for controlling the LCD Shield using the LCD module.ApplicationsThe LCD Shield is great …
OpenMV OpenMV3 4 2 Camera Module M7 H7 LCD Expansion Board Display Screen ModuleRead More
3pcs MFRC-522 RC522 RFID RF IC Card Reader Sensor Module Solder 8P Socket
$10.96Sensor & Detector ModuleAdd to cartIntroduction to the RFID moduleThe MF522-AN module adopts MFRC522 original chip design card reader circuit, which is easy to use and low in cost. It is suitable for users of advanced applications such as device development and card reader development, and users who need to design/produce RF card terminals. This module can be directly loaded …
3pcs MFRC-522 RC522 RFID RF IC Card Reader Sensor Module Solder 8P SocketRead More
Transparent Acrylic Sheet Housing Module Case for DSO138 Oscilloscope
$17.48DIY Electronic KitsAdd to cartFeatureThis product is for DSO138 Oscilloscope only. (Product ID:984002, 969762)Color:TransparentMaterial:AcrylicInstallation size:12.7 x 8.7 x 2.6 (L*W*H)Note:Package does not includes the DSO138 Oscilloscope.Instruction:Click to openPackage includes1 x DSO138 Transparent Acrylic Sheet
20Pcs 3V 650nM 5mW Line Laser Diode Module
$41.34Module ComponentsAdd to cartDescriptionSpot mode:line(Continuous output)Dimensions:diameter 9mm x length 23mmLaser working life:5000-10000 hours or moreLaser wavelength:650nmOutput power:5mWOperating voltage:DC3VWorking current:16mA ~ 20mAWorking temperature:-36 → ~ 65 →Storage temperature:-36 → ~ 65 →Level:sub-industrial gradeColor:red lightMaterial:brassApplication(1) industrial grade:can be used for equipment, health care, military, Kam pseudo security, stage lighting, tools, U disk, mobile phone, projection teaching flip pen, warm measuring …
MMDVM Open-Source Multi-Mode Digital Voice Modem DIY Kit Expansion Board for Raspberry Pi
$103.03Raspberry Pi & Orange PiAdd to cartDescription– This board could cooperate Raspberry Pi , Orange Pi, a variety of school development board to use.– Board has been applied in the GM300 GM3188 3688 950I 338 Vitex DR-1X, other types of repeaters and car stations need to be studied yourself.– The MMDVM is intended to be an open-source Multi-Mode Digital Voice Modem,which …
MMDVM Open-Source Multi-Mode Digital Voice Modem DIY Kit Expansion Board for Raspberry PiRead More
3Pcs 5V-30V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer Module
$10.04Other Module BoardAdd to cartFeaturePWM DC motor speed controller is a very safe product.When the situation is overcurrent, it will disconnect by itself. after cooling off a few seconds, the fuse will recovery automatically.With high voltage and high current resettable fuseMini but usefulSpecificationOperating voltage:DC 5-30VControl power:90W (maximum)Quiescent current:0.015A (standby)PWM duty cycle:1% -100%PWM frequency:10khzSize:29mm*23mm (excluding handles)Total height:15mmKnob color:Send randomlyPackage included3 …
3Pcs 5V-30V DC PWM Speed Controller Mini Electrical Motor Control Switch LED Dimmer ModuleRead More
Reviews
There are no reviews yet.