18650 Lithium Battery Welding Spot Welder Small Hand-held Welder Module
$67.50
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
The circuit board of this spot welding machine can be used for welding 18650/26650/32650 lithium batteries. Advantages:portable, stable, reliable, and durable. Low cost, you have a car starter battery, or a high-power battery pack, just connect it and use it!
Users need to bring their own 12V battery for power supply, and the welding current is about 90A~130A. It is easy to weld the common 0.1mm~0.12mm nickel plated sheet. Please make sure that your battery can have a current greater than 90A, otherwise you will not be able to weld!
Power supply voltage:12V-15V
Working current:90-150A (discharged below 90A, it will not work.)
A battery with a large discharge current will directly affect the welding effect. The following batteries are recommended
20-45ah Lead-acid battery with good performance and small internal resistance (internal resistance is less than 10 milliohms, discharge current is greater than 90A) such as:new car starter battery;
3.5-5.5ah 3S model airplane lithium battery pack around 45C;
30-35ah capacity 18650 battery pack;
Function button
1. Used to switch the machine 2. Used to switch gears! When the power is turned on, the default is the first gear. Press the button for 2 seconds to release, the gear will increase by one gear, and the buzzer will sound and the LED flashes corresponding to the number of gears.
For example:the 3rd gear, the buzzer beeps three times, and the LED flashes 3 times, a total of 5 gears. The spot welding intensity gradually increases from gear 1 to gear 5, and gear 5 is the strongest!
After the 5th gear, press and hold the button again. It will power off. In the off state, press and hold the button to power on, and the gear will return to the first gear.
Package included
1 x Motherboard
2 x Soldering pen with wire
2 x Input wires
2 x Heat shrink tube
3 sets of screws
1 x 1m nickel sheet 0.1*6mm
Weight | 0.12 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.