TF03K 100V350A Coulomb Counter Meter Battery Capacity indicator Voltage Current Display TTL232 Li-ion Lithium lifepo Lead Acid eBike RV with 1M Shielded Cable
$112.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
TF03K is a kind of high accuracy current type battery indicator, TF03K can test the voltage, current and capacity of lead-acid/lithium-ion battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. TF03K has function of memory. This battery indicator is suitable for mobile and portable equipments, ups, electric vehicles, ebike, battery cars, balance cars, cleaning machines and so on.
TF03K is different with voltage type battery indicator, TF03K has high accuracy and high reliability. So it is expensive than voltage type battery indicator like LY4,LY6……
ParameterMinTypeMaxUnit
Working voltage10.050.0120.0V
Working dissipation 10.015.0mA
Standby dissipation 1.02.0mA
Capacity accuracy ±2.0 %
Voltage accuracy ±2.0 %
Current accuracy ±2.0 %
Backlight on current 80.0100.0mA
Backlight off current 50.060.0mA
Capacity setting value0.1 999Ah
Current of 350A sampler0.0:350.0500.0A
Ambient Temperature02035→
Weight75g
Size94x55x20mm
Install
1. In the device panel to open a rectangular hole and two screw holes,
2. Then install the battery indicator from the front of the panel and place the indicator housing into the rectangular opening.
Connect
1. Prepare a shielded wire and a wire (0.3-0.75 mm
2
);
2. One end of the wire connects to B+ of battery;
3. Another end connects to B+ of sampler (any one is ok);
4. The B- of sampler connects to B- of battery;
5. P- of sampler connect to P- of output;
6. Finally connect sampler to indicator by the shielded wire.
Use setting
Capacity and voltage setting
1. Press the inchOKinch key for 3s to enter the setting menu;
2.Click the “up Inchor“down Inch key to select the setting items
CAP—capacity setting:an initial capacity has been set at factory, please set it according to the real capacity;
FULL U—full voltage setting:when the voltage is higher than it the percentage will be 100%;
ZERO_U—zero_voltage setting:when the voltage is lower than it the percentage will be 0%, backlight off , if you keep discharge the LCD flicker, the alarm indicator display and buzzer warning;
Alarm—alarm setting:when the capacity is lower than it the LCD flicker and buzzer warning.
Note:Generally the FULL U and ZERO_U do not need to set. The default is 0V, which is the invalid. If you want set, please understand the actual charge and discharge voltage of battery firstly.
3. Select“CAP Inchand click“OK Inchkey to enter the capacity setting; The set bit flicker, click the“OK Inchkey can select other bits, click the“up Inchor“down Inch key to plus and minus the value; after this click the“back Inchkey to quit capacity setting;
4. We can set other items with the same method as capacity. When all the items are set and all the values are correct, click the inchbackinch key to save the set and quit the setting menu;
5. Cut off and Re-power, it will work normally.
Package included
1 x coulomb counter
1 x sampler
1 x 1M shielded wire
Weight | 0.41 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.