TF03K 100V350A Coulomb Counter Meter Battery Capacity indicator Voltage Current Display TTL232 Li-ion Lithium lifepo Lead Acid eBike RV with 1M Shielded Cable
$112.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
TF03K is a kind of high accuracy current type battery indicator, TF03K can test the voltage, current and capacity of lead-acid/lithium-ion battery, and display them with intuitive battery symbol and percentage. Users can know the state of battery in time. TF03K has function of memory. This battery indicator is suitable for mobile and portable equipments, ups, electric vehicles, ebike, battery cars, balance cars, cleaning machines and so on.
TF03K is different with voltage type battery indicator, TF03K has high accuracy and high reliability. So it is expensive than voltage type battery indicator like LY4,LY6……
ParameterMinTypeMaxUnit
Working voltage10.050.0120.0V
Working dissipation 10.015.0mA
Standby dissipation 1.02.0mA
Capacity accuracy ±2.0 %
Voltage accuracy ±2.0 %
Current accuracy ±2.0 %
Backlight on current 80.0100.0mA
Backlight off current 50.060.0mA
Capacity setting value0.1 999Ah
Current of 350A sampler0.0:350.0500.0A
Ambient Temperature02035→
Weight75g
Size94x55x20mm
Install
1. In the device panel to open a rectangular hole and two screw holes,
2. Then install the battery indicator from the front of the panel and place the indicator housing into the rectangular opening.
Connect
1. Prepare a shielded wire and a wire (0.3-0.75 mm
2
);
2. One end of the wire connects to B+ of battery;
3. Another end connects to B+ of sampler (any one is ok);
4. The B- of sampler connects to B- of battery;
5. P- of sampler connect to P- of output;
6. Finally connect sampler to indicator by the shielded wire.
Use setting
Capacity and voltage setting
1. Press the inchOKinch key for 3s to enter the setting menu;
2.Click the “up Inchor“down Inch key to select the setting items
CAP—capacity setting:an initial capacity has been set at factory, please set it according to the real capacity;
FULL U—full voltage setting:when the voltage is higher than it the percentage will be 100%;
ZERO_U—zero_voltage setting:when the voltage is lower than it the percentage will be 0%, backlight off , if you keep discharge the LCD flicker, the alarm indicator display and buzzer warning;
Alarm—alarm setting:when the capacity is lower than it the LCD flicker and buzzer warning.
Note:Generally the FULL U and ZERO_U do not need to set. The default is 0V, which is the invalid. If you want set, please understand the actual charge and discharge voltage of battery firstly.
3. Select“CAP Inchand click“OK Inchkey to enter the capacity setting; The set bit flicker, click the“OK Inchkey can select other bits, click the“up Inchor“down Inch key to plus and minus the value; after this click the“back Inchkey to quit capacity setting;
4. We can set other items with the same method as capacity. When all the items are set and all the values are correct, click the inchbackinch key to save the set and quit the setting menu;
5. Cut off and Re-power, it will work normally.
Package included
1 x coulomb counter
1 x sampler
1 x 1M shielded wire
Weight | 0.41 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.