3 Sets DIY Pyroelectric infrared Sensor Kits Anti-theft Circuit Electronic Technology Training Sets
$27.93
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Size:82 x 44mm
Texture of material:Two-sided 1.6mm FR-4 board
Long life Low ESR
Function
Pyroelectric infrared sensor security circuit consists of pyroelectric infrared sensor PIR, integrated operational amplifier LM358, voltage comparator LM393, 110 alarm circuit and boot delay circuit, etc.. The circuit can be used as home security. When the family leaves the room, the switch K1 is closed, the circuit starts to work. As long as someone enters the room after a period of time, it will sound alarm.
1. The circuit is energized, the pyroelectric infrared signal of infrared sensor PIR to detect the front radiation of human body, from the signal PIR 2 feet output weak, after amplification transistor VT1, through the C2 input to the op amp IC2A 3 foot high gain low noise amplifier, and then by IC2A the inch1 footinch output signal.
2. IC2B in the circuit as a voltage comparator, its inch5inch pin voltage reference is provided by R10, VD1, IC2A when the inch1inch foot output signal to the IC2B inch6inch feet, inch5inch and inch6 footinch input voltage is compared, if at this time the inch6 footinch voltage ratio 5 feet high, 7 feet of IC2B from high level to low level. The C6 through the VD2 discharge, the IC3 2 feet into low level, if the voltage reference voltage of 2 feet inchthaninch 3 inchfeet of a resistance R14, partial pressure of R15 with low IC3, theinch 1 foot inchinto a high VT2 transistor conduction music chip IC4 theinch 2 foot inchvoltage, output audio signal after amplification transistor VT4, buzzer driver BELL issued 110 alarm sounds.
3. When people leave the detection area, IC2B’s inch7inch feet to high, VD2 cut-off, C6 has a charging time (30 seconds), making the buzzer delay alarm for 30 seconds.
4. VT3, R20 and C7. The time delay circuit, about 2 minutes (should be greater than the alarm delay time), to prevent the alarm immediately when starting up, let people have time to leave the scene, but also can prevent misoperation in power after the call.
Package included
3 x DIY pyroelectric infrared sensor kits
Weight | 0.081 kg |
---|
Customers Also Viewed
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera Cleaning
$20.24Switch AccessoriesAdd to cartFeatures Cleaning Cloths– Extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all surfaces and lenses. Lens cleaning pen – The soft brush retracts into the pen body to stay clean. Use the brush to dust off any particles and debris. Air Blower Cleaner – Direct a powerful stream of air to blow …
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera CleaningRead More
3V-9V DIY Shock Absorbed Smart Robot Tank Chassis Crawler Car Kit with 260 Motor
$52.64Smart Robot & Solar PanelAdd to cartNote:it is without shock absorbers and No damping wheelsSpecificationsMotor:260Votlage:3V-9VNet Weight:550gTrack Width:2.3cmSize:30cm*15cm*7.6cmNotes:This product without battery.Here is the GREEN version.Package Included1 x Smart Robot Tank Chassis Tracking Car
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor Module
$47.87Sensor & Detector ModuleAdd to cartFeatures– Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA– Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)– Supply voltage VDD main supply voltage range:1.71 V to 3.6 V– VDDIO interface voltage range:1.2 V to 3.6 V– Current consumption:1.8 μA @ 1 Hz …
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor ModuleRead More
30Pcs Geekcreit Mini DC Adjustable Power Supply Buck Module Step Down Module
$28.42Power Supply ModuleAdd to cartDescriptionModule Properties:Non-isolated step-down module (BUCK)Rectification:Synchronous rectificationInput voltage:DC 4.75V-23VOutput voltage:DC 1.0V-17V (Adjustable, Output Output current:Rated current 1.8A (3A MAX, can not be prolonged)Output ripple:30mV (no-load)Dimension:17 x 11 x 4mm(L x W x H) / 0.67inch x 0.43inch x 0.16inch approxWeight:1g (per.)Package included30 x Mini DC-DC step-down adjustable module
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$152.19Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
RF And Microwave DC Bias DC Feeder Module 10-6000MHz
$15.30Other Module BoardAdd to cartUse1. RF power supply of active antenna2. The output of the broadband amplifier is straight3 communication data injected through the RF sideWorking parameters1. Frequency range:10 – 6000MHz2. Insertion loss:0.3dB@512MHz 0.45dB@1575MHz3. Maximum voltage:50V4. Maximum current:500mA5. RF connector:SMA-K (outer screw bore)6. System impedance:50 ohms7. Dimensions:33mmx33mm without connectorWiring1.DC:external DC power supply2.RF:RF signal port (this port can only transmit …
RF And Microwave DC Bias DC Feeder Module 10-6000MHzRead More
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from Ecosystem
$30.36Electrical Relay & TimersAdd to cartFeatures1. E-ink screen home hygrometer, data can be clearly read in various brightness and angle. 2. High sensitivity and accurate sensirion from Switzerland, sense subtle change of temperature and humidity a breath away.3. 3 locating methods, melt in every scenes as long as you need it.4. An expression to spell over comfort level, cute and …
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from EcosystemRead More
Reviews
There are no reviews yet.