SX1278 Ra-06 LoRa WIFI Wireless Module Spread Spectrum Communication 433MHz Wireless Serial Port UART interface
$14.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Ra-06 Lora module is an embedded wireless data transmission module based on Lora spread spectrum technology. It uses the LoRa network to provide users with wireless data transmission functions. Supports point-to-point communication protocol, serial port transparent transmission communication, private protocol and ad hoc network protocol of loRa gateway.
The Ra-06 LoRa module has built-in SX1276 and Huada ultra-low power 32-bit cortex M0 + core MCU, 8K RAM, 64K FLASH. Runs a private networking protocol that can be independently developed by Anxin (LoraWan is not supported). Supports RTC wake-up and external pin interrupt wake-up under deep sleep. Various parameters such as serial port speed, transmit power, air speed, working mode can be modified online by AT instruction.
The wireless communication part of the Ra-06 LoRa module is based on Semtech SX1276 / SX1278’s LoRa spread-spectrum modulation technology. It has ultra-high receiving sensitivity and strong anti-interference ability. It adopts efficient forward error correction coding technology and has a very low bit error rate. And long-term stable data transmission capabilities. Modules and gateways run a star-shaped ad hoc network protocol that Anxin can independently develop. After the module is powered on, it can automatically find and join the gateway. There are three operation modes to choose to join the gateway.
Function
Frequency hopping communication, you can customize the frequency hopping list, select a frequency according to the frequency list for frequency hopping. Channel detection, channel avoidance, the module performs channel activity detection before sending data, and immediately delays avoidance after interference is found. Packet filtering based on the address set by the module. If the address does not match, the packet is not received. Set the network number, and the module communicates in groups. Wake-in-air technology.
Parameter
Voltage:1.8-3.6V
Current:Low power operation (standby)
Deep sleep
Deep sleep + timer work
Communication frequency:410MHZ-525MHZ
Transmission power:2-20dBm
Working temperature:-40 ~ + 85 degree
Storage temperature:-40 ~ + 90 degree
Operating humidity:10 ~ 90% RH (non-condensing)
Storage humidity:10 ~ 90% RH (non-condensing)
Communication distance:> 5km
Package included
1 x Wireless Module
Module software configuration
PC connection module serial port RX0, TX0. The default model rate is 9600, stop bit 1, even parity.
Module operation mode
When the module is powered on, it automatically enters the low-power operation mode. When the CPU is idle, it automatically shuts down, but the peripheral and IO ports are unchanged. Serial input AT command can wake up the CPU immediately, respond and process the command. After the task is processed, the CPU goes to sleep.
Try to enter a low-power sleep state when the CPU is idle. Low current operation is less than 350uA. Enter the command to enter deep sleep mode:AT + MODE = 1, at this time the power consumption reaches the minimum, and the current is 0.7uA. At this time, the timer is turned off, the module cannot perform any work, and the wake-up method:input arbitrary data into the serial port. AT + MODE = 2000, the module enters deep sleep mode, but when the timer is turned on, it will automatically wake up after 2000 milliseconds. At this time, the module current is 1uA. Can also actively wake up:input arbitrary data to the serial port.
Frequently Asked Questions
Q:What is Ra-06 interface, SPI or UART
A:Ra-06 is UART interface, Ra-01 & Ra-02 is SPI interface
Q:Can the MCU in Ra-06 be used to develop sensors
A:Temporarily does not support secondary development
Q:Can Ra-06 communicate with Ra-01
A:As long as the parameter settings of the two are correct, they can communicate with each other.
Q:Why is the power consumption difference between Ra-06 and Ra-01 / 02 in standby mode so much
A:Ra-01 and Ra-02 have substrate current, Ra-06 has been improved from the original
Q:Can Ra-06 work with LoRaWAN gateway Is Ra-06 only capable of point-to-point transmission
A:Can not be used together. Ra-06 can be used for point-to-point communication, or use a Ra-06 as a gateway.
Weight | 0.002 kg |
---|
Customers Also Viewed
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 Mesh
$13.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Woven Wire Cloth Screen is widely used in acid and alkali environment screening andfiltration, barbecue nets, handicraft nets, food machinery nets, cooking nets.SpecificationMaterial:Stainless steelSize:15x15cm(6inchx6inch)Mesh:60ApplicationWidely used in acid and alkali environment screening and filtration, barbecue nets, handicraft nets, foodmachinery nets, cooking nets, can also be used for solid material classification filtering, liquid and …
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 MeshRead More
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier Board
$47.10Amplifier BoardAdd to cartDetails1. The Bluetooth core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip. DAC adopts imported PCM51022. The electrolytic capacitor adopts the gold word SANYO 470UF/16V electrolytic capacitor to ensure strong and continuous power support.3. High-precision chip resistors are selected for the resistors to ensure a good …
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier BoardRead More
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM IC
$23.68Electronic Accessories & SuppliesAdd to cart10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROMFeatureSuitable for microprocessor systems requiring large data or program storage.It is organised as 2 M Words of 16 bit. The pin-out is compatible with a 32 Mbit Mask ROM.The FDIP42W has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the …
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM ICRead More
120pcs 2.8 4.8 6.3 insert Plug Spring Sheathed Wire Terminal Connector Cold Pressed Terminal 0.5-2.5mm2 Connector
$7.32Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionName:2.8mm Spring ConnectorsMode:DJ622-2.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:4.8mm Spring ConnectorsMode:DJ622-4.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:6.3mm Spring ConnectorsMode:DJ622-6.3Applied Wire Diameter:1.0-1.5mm2Material:Brass tinned(Sheath:flame …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$18.21Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
Geekcreit ESP32 WiFi+bluetooth Development Board Ultra-Low Power Consumption Dual Cores Pins Unsoldered
$15.30Smart ModuleAdd to cartDescriptionESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module.The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and …
RF Envelope Detector Amplitude Detection Discharge Signal Detection Module
$19.67RF amplifierAdd to cartDescriptionThis product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.The envelope detection principleFeature1. Maximum input:20dBm2. Detection output:The default is positive3. Working Frequency:0.1-3200MHz4. RC Filter:R = 10K, C = 1nF; (two elements in parallel …
RF Envelope Detector Amplitude Detection Discharge Signal Detection ModuleRead More
ZPHS01 All-in-one Gas Detection Module Carbon Dioxide Dust PM2.5 Sensor PM2.5 + CO2 + VOC + Temperature + Humidity Detector
$129.99Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.NoteThis is PM2.5 + CO2 + VOC + Temperature + Humidity PM2.5 + CO2 + CH2O + Temperature + Humidity ID:1680902OverviewThis is an all-in-one module integrating VOC sensor, laser dust sensor, infrared …
Reviews
There are no reviews yet.