SX1278 Ra-06 LoRa WIFI Wireless Module Spread Spectrum Communication 433MHz Wireless Serial Port UART interface
$14.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Ra-06 Lora module is an embedded wireless data transmission module based on Lora spread spectrum technology. It uses the LoRa network to provide users with wireless data transmission functions. Supports point-to-point communication protocol, serial port transparent transmission communication, private protocol and ad hoc network protocol of loRa gateway.
The Ra-06 LoRa module has built-in SX1276 and Huada ultra-low power 32-bit cortex M0 + core MCU, 8K RAM, 64K FLASH. Runs a private networking protocol that can be independently developed by Anxin (LoraWan is not supported). Supports RTC wake-up and external pin interrupt wake-up under deep sleep. Various parameters such as serial port speed, transmit power, air speed, working mode can be modified online by AT instruction.
The wireless communication part of the Ra-06 LoRa module is based on Semtech SX1276 / SX1278’s LoRa spread-spectrum modulation technology. It has ultra-high receiving sensitivity and strong anti-interference ability. It adopts efficient forward error correction coding technology and has a very low bit error rate. And long-term stable data transmission capabilities. Modules and gateways run a star-shaped ad hoc network protocol that Anxin can independently develop. After the module is powered on, it can automatically find and join the gateway. There are three operation modes to choose to join the gateway.
Function
Frequency hopping communication, you can customize the frequency hopping list, select a frequency according to the frequency list for frequency hopping. Channel detection, channel avoidance, the module performs channel activity detection before sending data, and immediately delays avoidance after interference is found. Packet filtering based on the address set by the module. If the address does not match, the packet is not received. Set the network number, and the module communicates in groups. Wake-in-air technology.
Parameter
Voltage:1.8-3.6V
Current:Low power operation (standby)
Deep sleep
Deep sleep + timer work
Communication frequency:410MHZ-525MHZ
Transmission power:2-20dBm
Working temperature:-40 ~ + 85 degree
Storage temperature:-40 ~ + 90 degree
Operating humidity:10 ~ 90% RH (non-condensing)
Storage humidity:10 ~ 90% RH (non-condensing)
Communication distance:> 5km
Package included
1 x Wireless Module
Module software configuration
PC connection module serial port RX0, TX0. The default model rate is 9600, stop bit 1, even parity.
Module operation mode
When the module is powered on, it automatically enters the low-power operation mode. When the CPU is idle, it automatically shuts down, but the peripheral and IO ports are unchanged. Serial input AT command can wake up the CPU immediately, respond and process the command. After the task is processed, the CPU goes to sleep.
Try to enter a low-power sleep state when the CPU is idle. Low current operation is less than 350uA. Enter the command to enter deep sleep mode:AT + MODE = 1, at this time the power consumption reaches the minimum, and the current is 0.7uA. At this time, the timer is turned off, the module cannot perform any work, and the wake-up method:input arbitrary data into the serial port. AT + MODE = 2000, the module enters deep sleep mode, but when the timer is turned on, it will automatically wake up after 2000 milliseconds. At this time, the module current is 1uA. Can also actively wake up:input arbitrary data to the serial port.
Frequently Asked Questions
Q:What is Ra-06 interface, SPI or UART
A:Ra-06 is UART interface, Ra-01 & Ra-02 is SPI interface
Q:Can the MCU in Ra-06 be used to develop sensors
A:Temporarily does not support secondary development
Q:Can Ra-06 communicate with Ra-01
A:As long as the parameter settings of the two are correct, they can communicate with each other.
Q:Why is the power consumption difference between Ra-06 and Ra-01 / 02 in standby mode so much
A:Ra-01 and Ra-02 have substrate current, Ra-06 has been improved from the original
Q:Can Ra-06 work with LoRaWAN gateway Is Ra-06 only capable of point-to-point transmission
A:Can not be used together. Ra-06 can be used for point-to-point communication, or use a Ra-06 as a gateway.
Weight | 0.002 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.