5pcs MC001 DC 3.7-6V 30KV High Voltage Pulse Generator High Voltage Igniter Module Arc Lighter
$31.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Product Name:high voltage generator
Model:MC-001
Volume:length 40mm diameter 21mm
Voltage:input DC 3.7-6V, output DC 30KV
Current:input 4A, output 0.5A
Cable length:the input is about 10cm, and the output is about 10cm
Structure:small volume one
Bipolar discharge distance:about 1.5cm (if exceed, easy to damage)
Use:often used in high voltage production, electronic DIY, product development, high voltage electronic burglar proof, etc.
Method of use:high output (monochrome thick wire) poles fixed on the discharge within the prescribed distance, low input (dichroic thin wire) red + green – connected with the battery, can produce high voltage arc work.
Input requirements:This product does not need auxiliary circuit, and can be directly used for battery. Input terminal is connected to single 3.7V lithium battery (such as 18650 battery) or Ni Cd / Ni MH battery pack, 4V or 6V lead-acid battery and so on (6V battery can achieve the best effect).
Modules used for attention
The high voltage module should avoid the use of electricity when no load is high. Before switching on, the proper distance of the high voltage wire must be adjusted. The distance between the high voltage wire and the battery is directly proportional to the battery voltage and capacity.
When measuring the distance of the arc, it is necessary to test the distance from short to long, and it is forbidden to exceed the longest arc distance. Because the high pressure energy can not be released, it is very easy to damage the module.
The power of the module is large, it is not suitable for heat dissipation, so it can not work for a long time.
The method of judging whether the capacity of the battery can drive the maximum output power is to measure the voltage of the battery when the arc is drawn. If it is around 6V, the maximum power can be output.
The small capacity of the two series lithium 7.2V, arc voltage measurement in the state has fallen to about 4V, the smaller the voltage of the capacity is low. It is recommended to use more than 2000MA of lithium, the best conditions with more than 4000MA battery.
Package included
5 x High voltage module
Weight | 0.135 kg |
---|
Customers Also Viewed
20pcs ADC CMOS CD74HC4067 16CH Channel Analog Digital Multiplexer Module Board Sensor Controller
$34.67Sensor & Detector ModuleAdd to cartDescription1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$45.51DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
1 Copper Sheet + 2 Aluminum Sheets Heatsink Kit with Black Glue for Raspberry Pi 4B
$9.10Raspberry Pi & Orange PiAdd to cartDescriptionsThe colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package Included1 x Copper Sheet2 x Aluminum Sheets
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning Kit
$90.96Motherboard & Development BoardAdd to cartpyBase Boardpyboard interface:support pyboard, pyWiFi-ESP32, pypyWiFi-ESP82662.54mm pin header:lead out all interfaces of pyboardButton * 2:RST and USR buttons are brought outPotentiometer:ADC inputPassive buzzer:DAC outputButton battery holder:Install CR1220 button batteryServo interface:servo interface * 1- * 4 (external isolation circuit is required to connect the servo)OLED interface:4P / 0.96inch / I2C / OLED Display1.77 Inch LCD interface:suitable …
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning KitRead More
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$29.79Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:433MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes3 x Wireless 3000m …
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
10Pcs DHT11 Digital Temperature Humidity Sensor Module for
$25.06Electronic Accessories & SuppliesAdd to cart10Pcs DHT11 Digital Temperature Humidity Sensor Module For Description DHT series numeric humiture sensor Humidity measuring range:20%-90%RH(0-50°Ctemperature compensation) Temperature measuring range:0 to +50°C Humidity measurement accuracy:±5.0%RH Temperature measurement accuracy:±2.0°C Response time Low power consumption Size:about 2.3cm x 1.2cm x 0.5cm Applications HVAC Testing and inspection equipment Automotive Data logger Consumer goods Automatic control Weather station …
10Pcs DHT11 Digital Temperature Humidity Sensor Module forRead More
Reviews
There are no reviews yet.