3pcs MC001 DC 3.7-6V 30KV High Voltage Pulse Generator High Voltage Igniter Module Arc Lighter
$21.09
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Product Name:high voltage generator
Model:MC-001
Volume:length 40mm diameter 21mm
Voltage:input DC 3.7-6V, output DC 30KV
Current:input 4A, output 0.5A
Cable length:the input is about 10cm, and the output is about 10cm
Structure:small volume one
Bipolar discharge distance:about 1.5cm (if exceed, easy to damage)
Use:often used in high voltage production, electronic DIY, product development, high voltage electronic burglar proof, etc.
Method of use:high output (monochrome thick wire) poles fixed on the discharge within the prescribed distance, low input (dichroic thin wire) red + green – connected with the battery, can produce high voltage arc work.
Input requirements:This product does not need auxiliary circuit, and can be directly used for battery. Input terminal is connected to single 3.7V lithium battery (such as 18650 battery) or Ni Cd / Ni MH battery pack, 4V or 6V lead-acid battery and so on (6V battery can achieve the best effect).
Modules used for attention
The high voltage module should avoid the use of electricity when no load is high. Before switching on, the proper distance of the high voltage wire must be adjusted. The distance between the high voltage wire and the battery is directly proportional to the battery voltage and capacity.
When measuring the distance of the arc, it is necessary to test the distance from short to long, and it is forbidden to exceed the longest arc distance. Because the high pressure energy can not be released, it is very easy to damage the module.
The power of the module is large, it is not suitable for heat dissipation, so it can not work for a long time.
The method of judging whether the capacity of the battery can drive the maximum output power is to measure the voltage of the battery when the arc is drawn. If it is around 6V, the maximum power can be output.
The small capacity of the two series lithium 7.2V, arc voltage measurement in the state has fallen to about 4V, the smaller the voltage of the capacity is low. It is recommended to use more than 2000MA of lithium, the best conditions with more than 4000MA battery.
Package included
3 x High voltage module
Weight | 0.081 kg |
---|
Customers Also Viewed
3Pcs Mini PAM8403 3Wx2 5V Dual Channel USB Power Audio Amplifier Board Volume Control
$7.13Amplifier BoardAdd to cartSpecificationOperating voltage:2.5V-5.5VMaximum output power:3W*2(5V 4┯)PCB size:Length:30mm* Width:21mm(Overall height after installed is about 16mm.)Note1.Please make sure the power supply is not more than 5.5V and please don’t do reverse polarity for ‘+’ and ‘-‘, or else, it will burn the board.2.This PAM8403 Audio Amplifier board could be powered by USB Power supply.Package Included3 x Amplifier Board
5pcs D222 Speaker Frequency Drvider Crossover Filters with Junction Box
$30.44Amplifier BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesFrequency divider is a circuit arrangement inside the sound box, to distinguish the sound signals of different frequencies (treble, tenor, bass), respectively to enlarge, and then sent to the speaker of the …
5pcs D222 Speaker Frequency Drvider Crossover Filters with Junction BoxRead More
DIY Wind Turbine Generator Model Science Education Experiment Physical Teaching Tool Creative Toy
$37.95PhysicsAdd to cartDescription– Good choice for teaching physical DC wind power generation principle.SpecificationRated Power:0.1(W)Output Voltage:5(V)Wind Wheel Diameter:0.055(m)Blade Quantity:3PcsRated Wind Speed:3.3(m/s)Finished Product Size(LxWxH):95mmx75mmx120mmBattery:3 Sections AA Battery(not included) Features1. The model is packaged by completely accessory sets ,you need to assemble by yourself ,just enjoy the DIY fun.2. Advanced design ,high utilization rate of wind energy, no matter where …
KING PIGEON M210T 4 Switch DIN Wet Contact input + 1 RS485 + 1 RJ45 industrial Ethernet IO Remote Acquisition Module
$139.08Network ModuleAdd to cartNote:Please refer to the title for the actual supported functions.This M210T version:Support 4DI+1RS485+ 1RJ45 wet contactDocumentsManual:Click here to openTool:Click here to openThe difference between switch input dry contact and wet contactDry contactExternal disconnection:the corresponding internal data is 0External closure:the corresponding internal data is 1Wet contactLogic 0:0-3VDCLogic 1:10-30VDCIntroductionThe M210T Ethernet Remote I/O Module is an industrial …
5pcs DIY Digital Display LED Logic Pen Electronic Kit High and Low Level Test Circuit Soldering Practice Board Kit
$13.68DIY Electronic KitsAdd to cartDescriptionPower supply:DC 4.5-5VBoard size:3.5 * 5.5cmLow-level judgment voltage:0.0-0.4VHigh-level judgment voltage:3.3-5VPackage included5 x DIY Digital Display LED Logic Pen Electronic Kit
3Pcs 4S 14.8V 16.8V 18650 Lithium Battery Protection Board Startable Electric Drill 40A Current
$16.28Battery Protection ModuleAdd to cartSpecificationsScope of application:Lithium batteries with nominal voltages of 3.6V and 3.7VProduct size:46*60*3.4mmProduct weight:10.3gCharging voltage:16.8V-18.1VContinuous discharge current (upper limit):40A (If the heat dissipation environment is not good, please reduce the load current to use)Continuous charging current (upper limit):20AApplicable electric drill:electric drill with starting current below 80A and power below 135W.Note1. To start the electric drill successfully, …
Pressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 Argon
$80.99Electrical Pump & ValveAdd to cartDescriptionPressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 Argon FeaturesThe pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi.And this flowmeter does not use a diaphragm,so it is more reliable than the flow-gauge style regulators.The output flow is adjustable from …
Pressure Reducer Mig Tig Flow Meter Control Valve Regulator for Gauge Welding Gas CO2 ArgonRead More
Reviews
There are no reviews yet.