Geekcreit Assembled DIY Geiger Counter Kit Module Miller Tube GM Tube Nuclear Radiation Detector Geekcreit for Arduino – products that work with official Arduino boards
$49.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Name:Radiation Detector system
Geiger tube parameters
Technical parameters diameter:Φ10±0.5mm
Total length:90±2mm
Starting voltage
Recommended operating voltage:380V
Minimum plateau length:80V
Maximum plateau slope:10%/80V
Extreme operating voltage:550V
The maximum count rate:25 times / min
Life:> 1 x 10^9 pulse
Medium temperature:-40 ~ 55 →
Size:108x63x20mm
Infos:!
Features
1) 5V power supply, or 1.5V 3x battery; 1.2V 4x battery, current:30mA – 12mA
2) for the detection of 20mR/h ~ 120mR/h of gamma rays and 100 ~ 1800 off
variables / points / cm 2 of the soft beta ray.
3) sound and light alarm
4) interrupt the output interface, through this interface can be connected to the
microcontroller and then displayed on the LCD.
5) Ardunio compatible
6) supports most of the Geiger tube:M4011, STS-5, SBM20, J305, etc. (the
330~600V operating voltage of the Geiger tube can be supported).
7) support the computer (PC) data acquisition, Matlab analysis and processing
Detection of nuclear radiation work (copy the following link to the browser to watch)
Http://v.youku.com/v_show/id_XNzI3MTU2NzQ0.html
Customers using our Geiger counter to record the video
Http://v.youku.com/v_show/id_XOTE4ODIyNTIw.html
Compatible with
(recommended UNO R3 , or any other arbitrary with 5V and external interrupt INT)
Internet can be downloaded:SPI example for Radiation Logger
Logger Radiation can be used as the host computer software to build radiation monitoring station.
Package included
1 x Assembled Radiation Detector system
1 x GM Tube
1 x Power supply cable
1 x Battery Holder (without batteries)
3 x Jumper Wires
4 x Nuts
1 x Acrylic cover
Weight | 0.276 kg |
---|
Customers Also Viewed
5pcs Blue Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:BlueStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single Play
$8.73Sensor & Detector ModuleAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
15pairs MC Connector Male Female 30A 1000V with 1pair MC Spanner Solar Panel Branch Series Connect Solar System
$42.07Electronic Accessories & SuppliesAdd to cartDescriptionRated voltage:1000 V Rated impulse voltage:1000 V Rated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉 Test voltage:6 kV (50 Hz) Protection grade:IP67 Insulation material:PC/PA Contact material:Copper, silver-plated Operating temperature:-40°C ~ +90°C Safety class:II Flame class:UL94-V0 Contact resistance:≤5mΩ Insertion / Withdrawal force:≤50N / ≥50N Suitable for cables:10, 12, 14 …
10Pcs TJA1050 CAN Controller interface Module BUS Driver interface Module
$22.99Driver ModuleAdd to cartDescription1. onboard TJA1050 CAN controller interface chip2. chip commonly used pin has led, convenient connection to use3. pin 5 v to power supply4. PCB board size:22 (mm) x11.5 (mm)Package included10 x TJA1050 CAN Controller Interface Module
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/s
$10.92Card ReaderAdd to cartDescriptionRC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the ‘table’ application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of …
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/sRead More
Reviews
There are no reviews yet.