SDR Receiver Broadband Software MSI.SDR 10kHz to 2GHz Panadapter SDR Receiver 12-bit ADC Compatible SDRPlay RSP1
$112.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
MSI.SDR is a powerful broadband full-featured SDR receiver, covers frequencies from 10KHz to 2GHz. Just connecting a PC and an antenna, the functions of the receiver can be provided. Compatible with all SDRPlay RSP1 software. Compatible with popular SDR software platforms, you can monitor up to 10MHz of spectrum simultaneously. Enjoy all modes of operation. Small size and easy to carry. Frequency from LF long wave to HF short wave VHF UHF microwave contains all amateur radio bands.
Features
Exquisite and sturdy aluminum casing, has a long service life.
Frequency continuous coverage from 10KHz to 2GHz.
12-bit ADC chip (not the kind of RTL chip)
Built-in front end filter.
Built-in TCXO (temperature-compensated crystal oscillator) 0.5ppm.
Spectrum bandwidth of up to 10MHz.
Higher sensitivity and fine selectivity.
More often low background noise.
Simple USB interface (micor jack), SMA antenna connector.
USB power supply, does not have a separate power supply.
Compatible with all SDRPlay RSP1 software.
It can receive HF short waves directly without the need of an upconverter.
Covers all amateur bands, aeronautical bands LF to HF, VHF, UHF.
It is possible to see the entire amateur band spectrum at the same time.
Support for mainstream SDR software (including HDSDR, SDRConsole, SDR , SDRuno, etc.)
Available ExtIO-based plugins.
Support for multi-system platforms.
Specifications
Case material:aluminum
Color:blue
Item size:73 * 23mm / 2.9 * 0.9in
Package included
1 x MSI.SDR Host
1 x Micor USB Cable
1 x Test Antenna
Weight | 0.107 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.