600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
$21.05
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module Properties:Non-Isolated Boost Module (BOOST)
Input voltage:DC10V-60V
Input current:10 (MAX)
Static operating current:10mA (12V 20V, the higher the output voltage, static and current will increase)
Output voltage:12-60V continuously adjustable (Default output 19V shipment, if you need other voltage please explain to the shopkeeper.)
Output current:10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range:0.2-10A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Operating temperature:-40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)
Operating frequency:150KHz
Conversion efficiency:92%-96% (efficiency related to input, output voltage, current, differential pressure)
Reverse input protection:None (note that positive and negative should not be reversed)
Installation method:4 3mm screw holes
Wiring method:wiring output
Module size:length 85mm width 52mm height 21mm
Single module weight:80g
Output voltage regulation:Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
Output current adjustment:Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. (For charging, you must use the discharged battery to adjust, because the more battery power left, the smaller the charging current.)
Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
Instructions for use
1, VIN+ is the input power anode, VIN- is the input power cathode,
2, OUT+ is the positive output power, OUT- is the negative output power,
3, Constant pressure adjustable range:DC12-60V (clockwise small, counterclockwise larger)
4, Constant current adjustable range:0.2A-10A (clockwise small, anticlockwise large,)
5, When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
7, The input voltage can not be lower than 10V or more than 60V,
8, Input maximum current can not exceed 10A, power can not exceed 600W,
9, Must ensure that the input voltage is lower than the output voltage by 2V or more.
10, Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5V at constant current).
11, When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.
Precautions
1, The input and output can not be reversed,
2, The input voltage should not be lower than 10V input voltage is too low can damage the power supply
(When using the battery, be careful to prevent the battery from over-discharging.)
2. The input and output voltage and current must not exceed the maximum during work to avoid damage to the power supply.
3, Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the life of the power supply.
4, Pay attention to dust, moisture.
Application range
1, DIY a power supply, input 12V can be, the output can be adjusted 12-50V.
2, For your electronic equipment power supply, you can set the output value according to your system voltage.
3, As the car power supply, power your laptop, PDA or a variety of digital products.
4, a high-power notebook mobile power DIY:coupled with a large-capacity 12V lithium battery pack, so that where your notebook can be lighted where.
5, Solar panel voltage regulator.
6, To the battery, lithium battery and other charges.
7, Drive high-power LED lights.
Package included
1 x 600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
Weight | 0.018 kg |
---|
Customers Also Viewed
JT-180 1.4W 7V Solar Panel Power Fountain Pump Outdoor Garden Pond Pool Submersible Water Pump Kit
$64.79Electrical Pump & ValveAdd to cartSpecificationsModel:JT-180Materail:Monocrystalline silicon+ABSSolar battery:7V,1.4WSolar battery:110mm*110mm/4.3inch*4.3inchThe power of pump:DC7V 1.4WMax flow pump:200L/hMax.water height of pump:75cm(Max,water-jet height:50cm)Life time:≥15000HoursFeatureThis product has the lowest rate of the power of solar battery to pump power,and it is not only very easy to operate the brushless motor under little sunshinelike the brush motor,but also, it has the much long life time than …
5pcs 220V XH-W3003 Micro Digital thermostat High Precision Temperature Control Switch Temperature Alarm
$68.61Sensor & Detector ModuleAdd to cartFeatureProduct Name:Microcomputer Temperature ControllerProduct model:XH-W3003Temperature range:-50~110°CTemperature control range:-50~110°CTemperature measurement accuracy:+-0.1 °CTemperature control accuracy:+-0.1 °CTemperature probe:1 meter waterproof probeSupply voltage:AC110-220VOutput power:AC220V:1000WOutput type:Direct outputOutput currentAppearance size:60 x 45 x 31mmOpening size:73mm (aperture 4mm)Features:Setting methodHigh temperature alarm (range:-50~110°C):For example, if you want to alarm when the temperature exceeds 20 °C, set the upper limit temperature to 20 °C …
30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2Pcs DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module Suitable for Solar Panel
$8.87Boost & Buck ModuleAdd to cartDescriptionsAuto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, the …
5 Pcs Blue Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$56.17Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included5* Blue Acrylic Case Kit
5pcs 0.5A 3S Synchronous Buck Li-Ion Charger DC 5-23V to 4.2V 8.4V 12.6V Power Supply Module for 3.7V 7.4V 11.1V 18650 Lithium Battery
$32.85Power Supply ModuleAdd to cartDescription3-Cell(3S) 12.6V VersionInput voltage:DC 14.8-23V(Recommend DC 14.8V/15V/18V)Charging voltage:12.6VCharging current:0.5ALed indicatorBright:Charging Off:full blinking:almost full; If the charging current is too large (or the battery capacity is small), it will quickly enter the flashing state, and the charging current should be reduced.Operating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30*15*5.5mmWeight:2gApplicationsCellular TelephonesPDA, MP3 Players, MP4 PlayersDigital CamerasBluetooth ApplicationsGame PlayersNotebookli-on …
15W 18V Semi Flexible Solar Panel with 5V USB Port & Cables
$58.36Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power (Pmax):15wMaximum Power Voltage (Vmp):18VMaximum Power Current (Imp):1.2aThe Number of Cells:36 PCSOutput:USB 5V & DC 18VSize:435 * 200 * 2.5 mmFeaturesLightweight and easy to carry.The charging temperature is -20-70 degrees Celsius.Flexible solar panel, maximum bending 30 degrees arc.Short circuit and surge technology keeps you and your equipment safe.Durable, waterproof.Packing Included1 x solar panels1 x …
15W 18V Semi Flexible Solar Panel with 5V USB Port & CablesRead More
DPX6005S Digital CNC Adjustable DC Power Supply 0-60V/32V 5A/3A 48V24V12V Step-down Board with LCD Display
$82.94Power Supply ModuleAdd to cartFeaturesIt is a fully CNC programmable step-down power supply with small size, high power, high efficiency and stable operation. It adopts a 1.8-inch TFT color liquid crystal display to provide comprehensive and clear display data. The power supply is controlled by an advanced microprocessor and can be precisely adjusted. And display voltage and current; using …
Reviews
There are no reviews yet.