600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
$21.05
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module Properties:Non-Isolated Boost Module (BOOST)
Input voltage:DC10V-60V
Input current:10 (MAX)
Static operating current:10mA (12V 20V, the higher the output voltage, static and current will increase)
Output voltage:12-60V continuously adjustable (Default output 19V shipment, if you need other voltage please explain to the shopkeeper.)
Output current:10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range:0.2-10A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Operating temperature:-40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)
Operating frequency:150KHz
Conversion efficiency:92%-96% (efficiency related to input, output voltage, current, differential pressure)
Reverse input protection:None (note that positive and negative should not be reversed)
Installation method:4 3mm screw holes
Wiring method:wiring output
Module size:length 85mm width 52mm height 21mm
Single module weight:80g
Output voltage regulation:Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
Output current adjustment:Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. (For charging, you must use the discharged battery to adjust, because the more battery power left, the smaller the charging current.)
Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
Instructions for use
1, VIN+ is the input power anode, VIN- is the input power cathode,
2, OUT+ is the positive output power, OUT- is the negative output power,
3, Constant pressure adjustable range:DC12-60V (clockwise small, counterclockwise larger)
4, Constant current adjustable range:0.2A-10A (clockwise small, anticlockwise large,)
5, When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
7, The input voltage can not be lower than 10V or more than 60V,
8, Input maximum current can not exceed 10A, power can not exceed 600W,
9, Must ensure that the input voltage is lower than the output voltage by 2V or more.
10, Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5V at constant current).
11, When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.
Precautions
1, The input and output can not be reversed,
2, The input voltage should not be lower than 10V input voltage is too low can damage the power supply
(When using the battery, be careful to prevent the battery from over-discharging.)
2. The input and output voltage and current must not exceed the maximum during work to avoid damage to the power supply.
3, Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the life of the power supply.
4, Pay attention to dust, moisture.
Application range
1, DIY a power supply, input 12V can be, the output can be adjusted 12-50V.
2, For your electronic equipment power supply, you can set the output value according to your system voltage.
3, As the car power supply, power your laptop, PDA or a variety of digital products.
4, a high-power notebook mobile power DIY:coupled with a large-capacity 12V lithium battery pack, so that where your notebook can be lighted where.
5, Solar panel voltage regulator.
6, To the battery, lithium battery and other charges.
7, Drive high-power LED lights.
Package included
1 x 600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
Weight | 0.018 kg |
---|
Customers Also Viewed
3Pcs 0.96 inch 4Pin White IIC I2C OLED Display Module 12864 LED
$38.88Display ScreenAdd to cartFeatureOLED Driver IC:SSD1306Resolution:128 x 64Visual Angle:>160°Input Voltage:3.3V ~ 6VCompatible I/O Level:3.3V, 5VMini Size:2.7 x 2.8cmOnly Need 2 I/O Port to ControlFull Compatible , 51NoteIf you decide to buy OLED display, you must confirm that you can make it work by yourself, we’ll haven’t any technology support. Thanks for your understanding and support.Package included3 x 0.96 …
3Pcs 0.96 inch 4Pin White IIC I2C OLED Display Module 12864 LEDRead More
Micro:Bit bluetooth 4.0 Low Energy Open Development Board for Programming
$60.06Raspberry Pi & Orange PiAdd to cartOverviewThe micro:bit is an open development board that allows you to run code on it and have access to all of the hardware.You can use your micro:bit for all sorts of cool creations, from robots to musical instruments – the possibilities are endless.This little device has an awful lot of features, like 25 red LED …
Micro:Bit bluetooth 4.0 Low Energy Open Development Board for ProgrammingRead More
500mL 24/40 Glass Filtering Flask Lab Filtration Conical Flask Bottle Laboratory Glassware
$58.71Glassware KitAdd to cartDescription– Flasks are glass or plastic containers for storing or collecting chemical samples or solutions in scientific laboratories.– It shaped like a cone with a wide, flat base that narrows to a neck opening, which can be closed with a stopper or cap.SpecificationMaterial:Borosilicate GlassCapacity:500mLFlask Style:Filtering (vacuum)Feature– The neck is 24/40 Ground Joint.Package Included1 x Glass …
500mL 24/40 Glass Filtering Flask Lab Filtration Conical Flask Bottle Laboratory GlasswareRead More
AC 100W 40KHZ Ultrasonic Cleaning Power Driver Board with 50W 40K Transducer 220V
$98.40Driver ModuleAdd to cartSpecificationsPower:220V 100WPendulum:50W 40KHZApplies to:Low-power ultrasonic cleaning machine, household cleaning machine, ultrasonic generator built machine.Features1. The ultrasonic generator can monitor the power system frequency ultrasound power.2. According to different requirements of users, real-time adjustment of various parameters, the power, amplitude, and running time.Circuit board and vibration head (ceramic transducer) Wiring instructions1. The board can not no-load …
AC 100W 40KHZ Ultrasonic Cleaning Power Driver Board with 50W 40K Transducer 220VRead More
5pcs 3S 18650 4A 11.1V BMS Li-ion Battery Protection Board 18650 Battery Charging Module Charger Electronic DIY
$19.48Battery Protection ModuleAdd to cartSpecificationsCharging Voltage:12.6V-13VOvercharge Voltage Range:4.25V-4.35V ± 0.05VOverpressure Voltage Range:2.3V-3.0V ± 0.05VUpper Limit Operating Current:3A-4AUpper Limit Instantaneous Current:9A-10AQuiescent Current:less than 30uAInternal Resistance:less than 100mohmEffective Life:more than 30,000 hoursOperating Temperature:-40- +50 degreesStorage Conditions:-40- +80 degreesSize:53 * 16 * 3mmShort Circuit Protection:protection, delay self-recovery ApplicationsThe power range is suitable for the following products:massager battery pack, LED light standby power …
3pcs infrared Light IR Camera Control Board for Surveillance Camera Night Vision CCTV Accessories
$10.52Driver ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsCurrent:700mAVoltage input:12V DCVoltage output:1.7-12V DCSize:38MM * 38MMPotential:good night vision effect; rigorous design, stable performance and strong anti-interference.Use:Suitable for all kinds of infrared lamp board drive, suitable for 1-6 infrared lampFunction:It can be …
Reviews
There are no reviews yet.