600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
$21.05
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module Properties:Non-Isolated Boost Module (BOOST)
Input voltage:DC10V-60V
Input current:10 (MAX)
Static operating current:10mA (12V 20V, the higher the output voltage, static and current will increase)
Output voltage:12-60V continuously adjustable (Default output 19V shipment, if you need other voltage please explain to the shopkeeper.)
Output current:10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range:0.2-10A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Operating temperature:-40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)
Operating frequency:150KHz
Conversion efficiency:92%-96% (efficiency related to input, output voltage, current, differential pressure)
Reverse input protection:None (note that positive and negative should not be reversed)
Installation method:4 3mm screw holes
Wiring method:wiring output
Module size:length 85mm width 52mm height 21mm
Single module weight:80g
Output voltage regulation:Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
Output current adjustment:Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. (For charging, you must use the discharged battery to adjust, because the more battery power left, the smaller the charging current.)
Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
Instructions for use
1, VIN+ is the input power anode, VIN- is the input power cathode,
2, OUT+ is the positive output power, OUT- is the negative output power,
3, Constant pressure adjustable range:DC12-60V (clockwise small, counterclockwise larger)
4, Constant current adjustable range:0.2A-10A (clockwise small, anticlockwise large,)
5, When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
7, The input voltage can not be lower than 10V or more than 60V,
8, Input maximum current can not exceed 10A, power can not exceed 600W,
9, Must ensure that the input voltage is lower than the output voltage by 2V or more.
10, Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5V at constant current).
11, When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.
Precautions
1, The input and output can not be reversed,
2, The input voltage should not be lower than 10V input voltage is too low can damage the power supply
(When using the battery, be careful to prevent the battery from over-discharging.)
2. The input and output voltage and current must not exceed the maximum during work to avoid damage to the power supply.
3, Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the life of the power supply.
4, Pay attention to dust, moisture.
Application range
1, DIY a power supply, input 12V can be, the output can be adjusted 12-50V.
2, For your electronic equipment power supply, you can set the output value according to your system voltage.
3, As the car power supply, power your laptop, PDA or a variety of digital products.
4, a high-power notebook mobile power DIY:coupled with a large-capacity 12V lithium battery pack, so that where your notebook can be lighted where.
5, Solar panel voltage regulator.
6, To the battery, lithium battery and other charges.
7, Drive high-power LED lights.
Package included
1 x 600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
Weight | 0.018 kg |
---|
Customers Also Viewed
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220V
$35.99Relay ModuleAdd to cartFeaturesWith isolation groove in control area and load area.With power and relay action indication, bright when connect and go off when disconnects.When there is a signal in signal input, public side and common side will breakover.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can …
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220VRead More
10pcs DC 3V Watering Small Water Pump Silent Mini Water Pump
$26.77Other Module BoardAdd to cartFeatureAmbient temperature:-20 ° C ~ 60 ° CUse ambient humidityUse medium:water, non-flammable fluid liquidUse scene:medical, fountain, etc.Life:>=200H (continuous work)Motor model:140 type 5500RPM/MINModel:Voltage Scope (DC):Current (A):Power (W):Max. Water Head (M):Max. Flow Rate (L/H):Starting Voltage:Waterproof GradeJT-DC3W-3:3V:0.12:0.36:0.35:80:1:IP68Package includes10 x Water Pump
3Pcs I2C WiiChuck Nunchuck Small Adapter Shield Module Board
$6.63Sensor & Detector ModuleAdd to cartSpecificationWiichuck is a board for Wii-Nunchuck.Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck.It is grate for DIY projects.Dimensions:1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)Package includes3 x Adapter Module
5Pcs YS-U12S5H AC to DC 5V 2A Switching Power Supply Module AC to DC Converter 10W Regulated Power Supply
$37.17Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures-Universal voltage input:AC100-265V AC-With overload, short circuit, over temperature protection function-Full load aging test-Ultra low output rippleSpecificationsModel:YS-U12S5HOutput characteristics:Output voltage:5VRated current:2000mACurrent range:0-2000mARippleOutput accuracy:÷1%Voltage regulation rate:÷1%Load regulation rate:÷1%Rated power:10WAdjustable output range:/Setup, rise, hold time:300ms、20ms、20ms/220VACInput characteristics:Input voltage range:AC100-264VInput currentFrequency range:47Hz-63HzEffectiveness:>83.5%Start impact circuit:COLD STARTLeakage currentProtection characteristics:Over power protection:150-170% rated power, automatic recovery after fault removalOver voltage …
CBB60 5Pcs 50UF 450V Water Pump Motor Run Capacitor
$64.03Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 50UF 450V Water Pump Motor Run CapacitorRead More
20pcs ZFX-W1302 Digital thermostat Controller Temperature Controlling Temperature Meter for Automatic incubator
$172.94Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsModel:ZFX-W1302Material:PVCPower Supply:DC 9-24VTemperature Measurement:-50 C – 120 CTemperature Control:0 C – 110 CTemperature Control:0.1 CDisplay Color:RedSensor:NTC B3435 10KSensor Cable Length:1MSize:99 * 43 * 22.6mmSetting Steps1. Short press the ‘Set’ key, the screen …
Reviews
There are no reviews yet.