600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
$21.05
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module Properties:Non-Isolated Boost Module (BOOST)
Input voltage:DC10V-60V
Input current:10 (MAX)
Static operating current:10mA (12V 20V, the higher the output voltage, static and current will increase)
Output voltage:12-60V continuously adjustable (Default output 19V shipment, if you need other voltage please explain to the shopkeeper.)
Output current:10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range:0.2-10A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Operating temperature:-40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)
Operating frequency:150KHz
Conversion efficiency:92%-96% (efficiency related to input, output voltage, current, differential pressure)
Reverse input protection:None (note that positive and negative should not be reversed)
Installation method:4 3mm screw holes
Wiring method:wiring output
Module size:length 85mm width 52mm height 21mm
Single module weight:80g
Output voltage regulation:Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
Output current adjustment:Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. (For charging, you must use the discharged battery to adjust, because the more battery power left, the smaller the charging current.)
Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
Instructions for use
1, VIN+ is the input power anode, VIN- is the input power cathode,
2, OUT+ is the positive output power, OUT- is the negative output power,
3, Constant pressure adjustable range:DC12-60V (clockwise small, counterclockwise larger)
4, Constant current adjustable range:0.2A-10A (clockwise small, anticlockwise large,)
5, When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
7, The input voltage can not be lower than 10V or more than 60V,
8, Input maximum current can not exceed 10A, power can not exceed 600W,
9, Must ensure that the input voltage is lower than the output voltage by 2V or more.
10, Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5V at constant current).
11, When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.
Precautions
1, The input and output can not be reversed,
2, The input voltage should not be lower than 10V input voltage is too low can damage the power supply
(When using the battery, be careful to prevent the battery from over-discharging.)
2. The input and output voltage and current must not exceed the maximum during work to avoid damage to the power supply.
3, Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the life of the power supply.
4, Pay attention to dust, moisture.
Application range
1, DIY a power supply, input 12V can be, the output can be adjusted 12-50V.
2, For your electronic equipment power supply, you can set the output value according to your system voltage.
3, As the car power supply, power your laptop, PDA or a variety of digital products.
4, a high-power notebook mobile power DIY:coupled with a large-capacity 12V lithium battery pack, so that where your notebook can be lighted where.
5, Solar panel voltage regulator.
6, To the battery, lithium battery and other charges.
7, Drive high-power LED lights.
Package included
1 x 600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
Weight | 0.018 kg |
---|
Customers Also Viewed
10Pcs 50cm Fishing Lures 316 Stainless Steel Wire Trace Leader Spinner Swivel Line
$14.16Switch AccessoriesAdd to cartSpecificationMaterial:316 Stainless steel & nylonColor:RedLength:50cmQuantity:10pcs/setFeatures-With black nickel rolling swivel and cross lock snap-Durable enough to prevent breakage of the wire when the fish is fighting-Capable to handle up to 50kgPackage Includes10x trace wires
5pcs 12-60V Car Lead Acid Battery Charge Level indicator Battery Tester Lithium Battery Capacity Meter Dual Red LED Tester Digital Voltmeter
$22.60Electronic Accessories & SuppliesAdd to cartDescriptionThis power meter is suitable for 12V, 24V, 36V, 48V, 60V, battery cars (not waterproof). It can also measure lithium batteries, polymer batteries, nickel-metal hydride batteries. Can also be used for other power / voltage measurement purposes.How to use:Connect the positive and negative terminals of the display board to the positive and negative terminals of …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI Express
$19.22Electronic Accessories & SuppliesAdd to cartDescriptionConnect any graphics card to a single 6-pin PCI-Express Power Cable. The 6+2-pin maleconnectors offer maximum versatility.Warning:Do not overload your power supply or the 6-pin power cable, running more than 300Wover a single 6-pin 18AWG PCI-Express cable is a fire hazard.Connectors:6-pin PCIe Female, 5x 6+2-pin PCIe MaleLength:8 inches / 20cmWire:18 AWG copperPackage included5 x PCI-e …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI ExpressRead More
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHz
$19.67Smart ModuleAdd to cartFeaturesIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable …
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHzRead More
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC Base
$83.13Electronic Accessories & SuppliesAdd to cartFeaturesPEB – 1 extension board, supporting RT809F use, support notebook IT8586E/IT8580E models such as EC, support the notebook, computer motherboards commonly used 32/40/48 feet BIOS chips (29/39/49/50 series FWH/LPC / 8 bit / 16 bit NOR flash), contact with pin detection, automatic identification of short circuit protection and unique features, to read and write speed …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC BaseRead More
Smart Robot Chassis Car Kit with 2Pcs Motor+ Speed Encoder + Battery Box for Arduino – products that work with official Arduino boards
$26.57Smart Robot & Solar PanelAdd to cartFeaturesMechanical structure is simple, it is easy to install.This car is the tachometer encoder.Can be used for distance measurement.Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.Download:www.uctronics.com/download/U3800.zipMotor ParametersVoltage:DC 3V:DC6V:DC 7.2VCurrent:160mA:220mA:250mANo-load Speed:120 rpm/min:200 rpm/min:250 rpm/minLoad Speed:100 rpm/min:175 rpm/min:210 rpm/minTorque:0.45 kg.cm:1.0 kg.cm:1.5 kg.cmReduction Ratio:1:48Noise:65dBMotor Size:65mm x 18mm …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover Kit
$21.65DIY Electronic KitsAdd to cartDescriptionHigh and low sound two-way, can be used for home audio, or car audio. High-quality components, fine workmanship. The four modes of high and low sound are adjustable, the whole process is free of welding, the use is simple and convenient, and the distribution of high and low sounds is more precise.Size:45*28mmPackage included3 x Two-way …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover KitRead More
Reviews
There are no reviews yet.