600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
$21.05
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Module Properties:Non-Isolated Boost Module (BOOST)
Input voltage:DC10V-60V
Input current:10 (MAX)
Static operating current:10mA (12V 20V, the higher the output voltage, static and current will increase)
Output voltage:12-60V continuously adjustable (Default output 19V shipment, if you need other voltage please explain to the shopkeeper.)
Output current:10A MAX More than 6A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range:0.2-10A
Output power:= input voltage * 10A, such as:input 12V * 10A = 120W, input 24V * 10A = 240W,
Input 36V*10A=1360W, input 60V*10A=600W,
Operating temperature:-40 ~ +85 degrees (enhance the heat when the ambient temperature is too high)
Operating frequency:150KHz
Conversion efficiency:92%-96% (efficiency related to input, output voltage, current, differential pressure)
Reverse input protection:None (note that positive and negative should not be reversed)
Installation method:4 3mm screw holes
Wiring method:wiring output
Module size:length 85mm width 52mm height 21mm
Single module weight:80g
Output voltage regulation:Adjust CV-ADJ potentiometer, according to your battery or LED, set the output voltage to your desired voltage value. Turn clockwise the voltage reduce and turn it counterclockwise, it becomes larger.
Output current adjustment:Adjust the CC-ADJ potentiometer clockwise by 20 turns, set the output current to the minimum, connect to the LED, and adjust the CC-ADJ potentiometer to your desired current. For battery charging, after discharging the battery, connect it to the output and adjust the CC-ADJ to your desired current. (For charging, you must use the discharged battery to adjust, because the more battery power left, the smaller the charging current.)
Please do not adjust the current by short circuit. The circuit structure of the boost module cannot be adjusted by short circuit.
Instructions for use
1, VIN+ is the input power anode, VIN- is the input power cathode,
2, OUT+ is the positive output power, OUT- is the negative output power,
3, Constant pressure adjustable range:DC12-60V (clockwise small, counterclockwise larger)
4, Constant current adjustable range:0.2A-10A (clockwise small, anticlockwise large,)
5, When the input current exceeds 6A, it is necessary to strengthen the heat dissipation (the aluminum substrate is attached to the flat metal part),
7, The input voltage can not be lower than 10V or more than 60V,
8, Input maximum current can not exceed 10A, power can not exceed 600W,
9, Must ensure that the input voltage is lower than the output voltage by 2V or more.
10, Before turning on the load, please adjust the required voltage and current at no-load (no-load voltage should be increased by 3-5V at constant current).
11, When using switching power supply or other secondary power supply, please ensure that the power supply power should be more than double the power supply power of this module.
Precautions
1, The input and output can not be reversed,
2, The input voltage should not be lower than 10V input voltage is too low can damage the power supply
(When using the battery, be careful to prevent the battery from over-discharging.)
2. The input and output voltage and current must not exceed the maximum during work to avoid damage to the power supply.
3, Pay attention to ventilation and heat dissipation when working with full load for a long time to extend the life of the power supply.
4, Pay attention to dust, moisture.
Application range
1, DIY a power supply, input 12V can be, the output can be adjusted 12-50V.
2, For your electronic equipment power supply, you can set the output value according to your system voltage.
3, As the car power supply, power your laptop, PDA or a variety of digital products.
4, a high-power notebook mobile power DIY:coupled with a large-capacity 12V lithium battery pack, so that where your notebook can be lighted where.
5, Solar panel voltage regulator.
6, To the battery, lithium battery and other charges.
7, Drive high-power LED lights.
Package included
1 x 600W Aluminum Step Up Constant Voltage Current Adjustable Power Supply Module
Weight | 0.018 kg |
---|
Customers Also Viewed
HS-48B Set 600PCs Cold-pressed Assorted Crimp Terminal Para Fio Combination Plug Spring Boxed Connector Cross Wire Crimping Tool
$18.21Electronic Accessories & SuppliesAdd to cartPackage Included6.3mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female4.8mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female2.8mm:0.5 – 1.0 mm2 / AWG 22-18;50 pieces male and 50 pieces female50 pieces each protective cover for male and …
Geekcreit 315/433MHz DC12V 10A 1CH Single Channel Wireless Relay RF Switch Receiver Board with Case
$17.48Relay ModuleAdd to cartSpecification1. Input Voltage:DC10-14V2. Standby Current3. RF Frequency:315/433MHz (optional)4. RF Working mode:Super heterodyne receiver5. Receiver Sensitivity:>97dBm6. Remote Control Distance:>100 meter(In open environment)7. Decoding Way:MCU Software decoding8. Can store the number of remote control:509. Support remote control type:Fixed code, learning code10. Channel:1CH11. Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)12. Wiring Method:Fixed wiring terminal13. Working Voltage:DC12V14. Output Current:10A15. …
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
offline Version 1610 PRO 3 Axis CNC Router GRBL Control DIY Adjustable Speed Spindle Laser Motor Wood Engraving Milling Machine
$346.06Laser Engraving MachineAdd to cartThe software and instruction please:https://drive.google.com/openid=1JXQbBj-CuYee53yvQESx5HsVRhJ59VTDSpecification:Rated Voltage:24VEngraving area:16x10x4.5cmSpindle:775 spindle motorSoftwear:GRBL control systemssupport system:24V 5.6A adapterStepper motor:fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/MSpindle:775 spindle motor (12-36V) 24V:10000r / minSupported System:Windows XP / Win 7 / Win 8 / Win 10 / Linux.Drill bits:tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.clamps:4 pcs, Hold the thickness of 0-30mm,size:50 …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
$8.13Test & Measuring ModuleAdd to cart3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorFeatures1. As a square wave signal generator,generates a square wave signal used for experimental development.2. Used to drive a stepper motor for generating a square wave drive signal.3. Generate adjustable pulse for MCU.4. Generate adjustable pulse,to control circuitry associated.5. Size:31mm x 22mm6. Main chip:NE5557. …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorRead More
PiFi HIFI DAC+ Digital Audio Card Pinboard for Raspberry Pi 3 Model B /2B/B+/A+
$40.49Raspberry Pi & Orange PiAdd to cartPiFi HIFI DAC+ Digital Audio Card Pinboard For Raspberry Pi 2 Model B / B+ / A+DescripionIt’s suitable for Raspberry pi B+. You can setup a open music player by Volumio systemPackage included1 x Digital Audio Card Pinboard
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip Wire
$123.28Smart Robot & Solar PanelAdd to cart12V 20W 45CM x 35CM PolyCrystalline Solar Panel With Alligator Clip WireFeatures20W 12V PolyCrystalline Cells Solar Panel High efficiency and excellent performanceProvided with 2 alligator clips and 4m cableSuitable for a variety of equipments, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorbike, boat, etc..Power:20WVoltage:12VMaterial:PolyCrystalline Weight:415g Dimensions:45cm x 35cm (LxW)Cable Length:Approx. 4mPackage …
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip WireRead More
CJMCU-231 Pedometer Sensor Module Triaxial Accelerometer KX023-1025 FIFO FILO
$9.68Sensor & Detector ModuleAdd to cartInstructions:http://files.hobbyant.com/2018/06/CJMCU-23-TEST.zipChip FeatureDigital High-Pass Filter OutputsEmbedded FIFO/FILO bufferLow Power Consumption with FlexSet™ Performance OptimizationInternal voltage regulatorEnhanced integrated Directional Tap/Double-TapTM, and Device-orientation AlgorithmsUser-configurable wake-up functionDigital I2C up to 3.4 MHzDigital 3-wire and 4-wire SPI up to 10 MHzLead-free SolderabilityExcellent Temperature PerformanceHigh Shock SurvivabilityFactory Programmed Offset and SensitivitySelf-test FunctionPackage includes1 x Pedometer Sensor Module
Reviews
There are no reviews yet.