3pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$16.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:JDY-10 bluetooth 4.0 slave module
Kernel:M0
Communication interface:serial port
Working voltage:1.9-3.6V
Communication distance:100 meters
Working current:90ua
Suspen mode:14 uA
Module is:bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.
Features
1:Support Android, IOS mobile phone data penetration
2:Support low power consumption (standby current can reach several uA)
3:Support GPIO and UART peripheral interface
4:Support AT command operation
5:Can be certified by FCC/CE and other standards
Product application range
1:bluetooth LED lighting
2:Motor adjustment and other products
3:Anti-lost alarm and other products
4:Sports Health Care
5:Small appliances
6:Automotive Electronics
Technical specifications
Type:Specifications
Working voltage:1.9 – 3.6V
Operating temperature:-40 – 85°C
Maximum transmit power:+8dbm
Antenna:PCB onboard antenna
Receiving sensitivity:-92dbm
Average current:Wake mode:90uA
Suspen mode:14 uA
Deep Sleep mode:1uA
Factory default configuration
Service UUID:FFE0
Feature UUID:FFE1
Serial port baud rate:115200bps
AT instruction set
Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.
Instruction set details
(Note:You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)
Detailed instructions
(AT commands are case sensitive and end with carriage return, newline characters:rn)
1. Get the version number
command:response:parameter
AT+VER:+:Param:version
Default:+JDY-10-V1.8
2. Get the bluetooth MA C address
command:response:parameter
AT+MA C:+MA C::Param:MA C address
3. Set the bluetooth name
command:response:parameter
AT+NAME:OK:Param:bluetooth name
Default name:JDY-10
Up to 18 bytes
4. Set / query – transmit power
command:response:parameter
AT+POWE
AT+POWE:OK
+POWE:Param:(0-5)
0:8db
1:5db
2:0db
3:-5db
4:-10db
5:-13db
5. Set / query – serial port baud rate
command:response:parameter
AT+BAUD:OK:Param:(0-7)
0:115200 bps
1:57600 bps
2:38400 bps
3:19200 bps
4:14400 bps
5:9600 bps
6:4800 bps
7:2400 bps
AT+BAUD:+BAUD
6. Set / query – broadcast interval
command:response:Parameter
AT+ADVINT:OK:Param:(0-6)
0:100ms
1:100ms
2:250ms
3:500ms
4:1600ms
5:3200ms
6:4800ms
AT+ADVINT:+ADVINT
Package included
3 x JDY-10 bluetooth 4.0 Module
Weight | 0.036 kg |
---|
Customers Also Viewed
CC2530F256RHAR cc2530 Module Serial Port Transparent Transmission with ZB502 Development Board Kit
$52.47Module KitsAdd to cartNoteAt least two CC2530 modules are needed to realize Z1gBee networking, this product contains only one.Two methods can be usedApplication method:(The bottom layer is implemented by the board, you only do the application)Use the firmware associated with the board. In this way, the board is a Z1gBee wireless serial port module, the operation is as …
H2519-5 Dual Row Plastic Terminal 600V 36A 6 Positions Screw Terminal Block Cable Connector Barrier Terminal Strip Block
$12.14ConnectorsAdd to cartSpecificationModel:H2519-5Type:Terminal block Working frequency:High frequencyInterface type:AC/DCRated current:36ARated voltage:600VConductor cross section:0.5-6mm2Number of pin:6Number of bits:6Contact material:CopperInsulation material:Insulation plasticSize:55.6mm x 21mm x21mmFeature:1) High precision2) Excellent inoxidability3) High corrosion resistance4) Great ingredient accuracy and high intensity5) Widely used in lamp, decorated lighting, factory, household appliances, distribution boxes and other transmission equipment, specially point at wire, cable access and …
2 Lamp Backlight Universal LCD CCFL 10V-28V inverter
$8.73Other Module BoardAdd to cart2 Lamp Backlight Universal LCD CCFL 10V-28V Inverter For 10 Inch To 22 Inch ScreenFeatureVoltage:10V ~ 28VCable:300mm(L) / 6 pinSize:122 x 27mm ( L x W )Interface:double light small interfaceInterface definition:1. VCC 2. GND 3. NULL 4. NULL 5. ON/OFFPackage included1 x 2 lamp backlight universal laptop LCD CCFL inverter 10V-28V1 x Cable
Wanptek NPS306W 110V/220V 0-30V 0-6A Adjustable Digital DC Power Supply 180W Regulated Laboratory Switching Power Supply
$170.09Electrical DC Power SupplyAdd to cartProduct descriptionThe Wanptek NPS-W series is a three-window display mini DC power supply that simultaneously displays voltage, current, and power.This product improves the shortcomings of traditional linear power supplies that are bulky, heavy, and inefficient.The output voltage and current of the product can be controlled and adjusted by coarse adjustment and fine adjustment potentiometer respectively, …
5pcs CJMCU-5102 PCM5102A Stereo Digital To Analog Converter DAC PLL Voice Module
$50.58Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionBrand:CJMCUPCM5102A Stereo DAC Digital To Analog Converter PLL Voice ModuleMore infos:!Package included5 x CJMCU-5102 Stereo DAC Digital To Analog Converter PLL Voice Module
1Channel RS485 MODBUS RTU Serial Port Multi-function Relay Module PLC Controller for Smart Home 12V DC
$12.66Relay ModuleAdd to cart>>> Manual:Click here to open SpecificationsWorking voltage:DC 12VWorking current:standby 11-13mA, 1 relay is on 44mA.Size:45 x 30 x 18 mmWeight:18 gramsMaximum load:10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDCFeatures-Six working modes:open, close, jog, self-lock, interlock, delay-AT command mode and MODBUS command control mode-Maximum delay of 9999 seconds under …
Reviews
There are no reviews yet.