10pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$47.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:JDY-10 bluetooth 4.0 slave module
Kernel:M0
Communication interface:serial port
Working voltage:1.9-3.6V
Communication distance:100 meters
Working current:90ua
Suspen mode:14 uA
Module is:bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.
Features
1:Support Android, IOS mobile phone data penetration
2:Support low power consumption (standby current can reach several uA)
3:Support GPIO and UART peripheral interface
4:Support AT command operation
5:Can be certified by FCC/CE and other standards
Product application range
1:bluetooth LED lighting
2:Motor adjustment and other products
3:Anti-lost alarm and other products
4:Sports Health Care
5:Small appliances
6:Automotive Electronics
Technical specifications
Type:Specifications
Working voltage:1.9 – 3.6V
Operating temperature:-40 – 85°C
Maximum transmit power:+8dbm
Antenna:PCB onboard antenna
Receiving sensitivity:-92dbm
Average current:Wake mode:90uA
Suspen mode:14 uA
Deep Sleep mode:1uA
Factory default configuration
Service UUID:FFE0
Feature UUID:FFE1
Serial port baud rate:115200bps
AT instruction set
Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.
Instruction set details
(Note:You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)
Detailed instructions
(AT commands are case sensitive and end with carriage return, newline characters:rn)
1. Get the version number
command:response:parameter
AT+VER:+:Param:version
Default:+JDY-10-V1.8
2. Get the bluetooth MA C address
command:response:parameter
AT+MA C:+MA C::Param:MA C address
3. Set the bluetooth name
command:response:parameter
AT+NAME:OK:Param:bluetooth name
Default name:JDY-10
Up to 18 bytes
4. Set / query – transmit power
command:response:parameter
AT+POWE
AT+POWE:OK
+POWE:Param:(0-5)
0:8db
1:5db
2:0db
3:-5db
4:-10db
5:-13db
5. Set / query – serial port baud rate
command:response:parameter
AT+BAUD:OK:Param:(0-7)
0:115200 bps
1:57600 bps
2:38400 bps
3:19200 bps
4:14400 bps
5:9600 bps
6:4800 bps
7:2400 bps
AT+BAUD:+BAUD
6. Set / query – broadcast interval
command:response:Parameter
AT+ADVINT:OK:Param:(0-6)
0:100ms
1:100ms
2:250ms
3:500ms
4:1600ms
5:3200ms
6:4800ms
AT+ADVINT:+ADVINT
Package included
10 x JDY-10 bluetooth 4.0 Module
Weight | 0.12 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.