10pcs JDY-10 bluetooth 4.0 Module BLE bluetooth Serial Port Module Compatible with CC2541 Slave
$47.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:JDY-10 bluetooth 4.0 slave module
Kernel:M0
Communication interface:serial port
Working voltage:1.9-3.6V
Communication distance:100 meters
Working current:90ua
Suspen mode:14 uA
Module is:bluetooth 4.0 slave
JDY-10 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, maximum transmission power is 8db, maximum transmission distance is 80 meters, low power consumption, small size, strong signal, data transmission Stable and other characteristics.
Features
1:Support Android, IOS mobile phone data penetration
2:Support low power consumption (standby current can reach several uA)
3:Support GPIO and UART peripheral interface
4:Support AT command operation
5:Can be certified by FCC/CE and other standards
Product application range
1:bluetooth LED lighting
2:Motor adjustment and other products
3:Anti-lost alarm and other products
4:Sports Health Care
5:Small appliances
6:Automotive Electronics
Technical specifications
Type:Specifications
Working voltage:1.9 – 3.6V
Operating temperature:-40 – 85°C
Maximum transmit power:+8dbm
Antenna:PCB onboard antenna
Receiving sensitivity:-92dbm
Average current:Wake mode:90uA
Suspen mode:14 uA
Deep Sleep mode:1uA
Factory default configuration
Service UUID:FFE0
Feature UUID:FFE1
Serial port baud rate:115200bps
AT instruction set
Users can communicate with the bluetooth chip through the serial port. The serial port uses Tx, Rx two signal lines, and the baud rate is supported.
Hold 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200. The default baud rate of the serial port is 115200bps.
Instruction set details
(Note:You must enter and enter the line when you send the AT command. The AT command can only take effect when the module is not connected. Once the blue is enabled.
When the tooth module is connected to the device, the bluetooth module enters the data transparent transmission mode)
Detailed instructions
(AT commands are case sensitive and end with carriage return, newline characters:rn)
1. Get the version number
command:response:parameter
AT+VER:+:Param:version
Default:+JDY-10-V1.8
2. Get the bluetooth MA C address
command:response:parameter
AT+MA C:+MA C::Param:MA C address
3. Set the bluetooth name
command:response:parameter
AT+NAME:OK:Param:bluetooth name
Default name:JDY-10
Up to 18 bytes
4. Set / query – transmit power
command:response:parameter
AT+POWE
AT+POWE:OK
+POWE:Param:(0-5)
0:8db
1:5db
2:0db
3:-5db
4:-10db
5:-13db
5. Set / query – serial port baud rate
command:response:parameter
AT+BAUD:OK:Param:(0-7)
0:115200 bps
1:57600 bps
2:38400 bps
3:19200 bps
4:14400 bps
5:9600 bps
6:4800 bps
7:2400 bps
AT+BAUD:+BAUD
6. Set / query – broadcast interval
command:response:Parameter
AT+ADVINT:OK:Param:(0-6)
0:100ms
1:100ms
2:250ms
3:500ms
4:1600ms
5:3200ms
6:4800ms
AT+ADVINT:+ADVINT
Package included
10 x JDY-10 bluetooth 4.0 Module
Weight | 0.12 kg |
---|
Customers Also Viewed
5pcs EQKIT AMP-1 TDA2822M Power Amplifier Amplify Module DIY Kit Electronic Production for Diy Kit Electronic PCB Board Module
$43.42DIY Electronic KitsAdd to cartDescriptionPackage Name:TDA2822M AmplifierKit Model:AMP-1Working voltage:DC4.5-9VPCB size:51*36mmSpeaker Size:50mmSpeaker Power:0.25WAMP-1 amplifier using TDA2822M acts as amplifier chip, this chip is STMicroelectronics (ST) developed dual-channel monolithic power amplifier IC, usually in the pocket cassette player (WALKMAN), tape recorders and multimedia speaker in for the audio amplifier. Has a simple circuit, good sound quality, wide voltage range and other …
CE034 DC 5V 12V 24V Bluetooth Relay Android APP Mobile Phone Remote Control Optical isolation Switch for Motor LED Light Lock NET Smart Home
$29.51Smart ModuleAdd to cartDocument click to download:CE034Description– Operating voltage:power supply 1, DC 6-25V; power supply 2,C 5V– Operating Current:Standby 11MA, Relay Open 45MA (voltage DC 12V)– Bluetooth:V2.1 EDR, Class 2– 2.4GHz-2.48GHz unlicensed ISM band– Send commands via Android Bluetooth APP control relay turned on and off (we provide Bluetooth APP, you can also use your own APP to …
3pcs 5 Pin Relay 12V DC 20A Coil Power Relay SRA-12VDC-CL
$3.79Electronic Accessories & SuppliesAdd to cartFeatureRelay is an electrical control device, typically used in automatic control circuitIt is actually a small current to control a large current operation of the automatic switchIt plays a role in the automatic adjustment circuit, safety protection, conversion circuitModel:SRA-12VDC-CLParameters:12V 20ADimensions:15 x 11 x 13mmPackage included3 x Relay
5Pcs Digispark Pro Kickstarter Development Board USB Micro ATTINY167 Module
$48.34Motherboard & Development BoardAdd to cartDescription1. Compatible with IDE 1.5 (OSX/Win/Linux)2. Fully signed drivers and executable for easy installation3. USB programming, USB device emulation, USB-CDC virtual serial port emulation4. 16 MHz AVR MCU – using a true 16Mhz precision crystal5. 16KB Flash Memory (14.5K+ after bootloader)6. Serial over USB debugging and communication!7. 14 I/O Pins (2 shared with USB)8. I2C, …
5Pcs Digispark Pro Kickstarter Development Board USB Micro ATTINY167 ModuleRead More
5pcs ESP-F1 Wireless WiFi Module ESP8266 Serial WiFi Module
$26.81Smart ModuleAdd to cartFeaturesESP-F1 module core processor uses high cost performance chip ESP8266EX. The chip integrates the industry-leading Tensilica’s L106 ultra-low power 32-bit micro MCU with 16-bit streamlined mode, 80 MHz and 160 MHz main frequency support and RTOS support in smaller size packages. ESP8266EX has a complete Wi-Fi network function, which can be used independently and run …
5pcs ESP-F1 Wireless WiFi Module ESP8266 Serial WiFi ModuleRead More
Waveshare RS485 SP3485 RS485 to TTL Communication Module Transceiver 3.3V Converter Board
$11.26Converter BoardAdd to cartFeatureFunction introduction:3.3V RS485 transceiverMain features:3.3V power supply, supporting multiple communication bus interfacesTypical application:RS485 communication based on 3.3V systemMain resources:SP3485 / MAX3485, control interface, communication bus interfaceDocumentsSchematic:Click here to openSample tutorial:Click here to openPackage includes1 x Converter Board
TSL2591X Light Sensor with PH2.0 5PIN Cable 600M:1 Wide Dynamic Range 88000Lux I2C interface 3.3V 5V Sensor for Raspberry Pi
$16.36Raspberry Pi & Orange PiAdd to cartFeaturesWork with TSL25911FN,Compatible with Infrared Ray and Human Visible Light (Better than TSL2561)Built-in ADC, Directly Output through I2C Interface, Great Anti-interference PerformanceLevel of Sensitivity up to 188uLux 600M:1 Wide Dynamic RangeBuilt-in Infrared Photodiode and Bandwidth Photodiode.Accurate Measuring PerformanceWith Interrupt Output,Upper and Lower Threshold Could Be ProgrammedElectric Level Switch Circult IncludedSpecificationsSensor:TSL25911FNCommunication Interface:I2C (Address:0x29)Range:0-88000LuxWorking Voltage:3.3V/5VSize:27x20mmFixing Hole Diameter:2mmFor …
Reviews
There are no reviews yet.