Waterproof 3.2V LiFePo4 8S 24V 80A 100A 200A 500A 18650 LFP PCM Battery Protection Board BMS with Balanced
$83.62
Current 80A Type Separate Port / Current 100A Type Separate Port / Current 120A Type Separate Port / Current 150A Type Separate Port / Current 80A Type Common Port / Current 100A Type Common Port / Current 120A Type Common Port / Current 150A Type Common Port / Cu
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Model:DL8S (3.2V Rated LiFePO4 Battery bms not for 3.7V rated Li-ION Battery bms)
common Version:common port for charge/discharge
separate Version:separate port for charge/discharge
We can customize any PCB from 1S to 30S lithium batteries with different current.(Quantity>10)
Highlight:For the same model, its charge current is less than discharge current.
Overview
∈DL8S 24V 80A 100A 120A 150A 200A 500A PCB is used for 8 series 24V lifepo4 battery pack.
∈We can design it for various lithium batteries like LiFepo4, LiMn2O4, and Li-polymer etc.
∈The main functions are:over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection etc.
∈According to the customer request we can develop PCM in different sizes and structures.
∈BMS manufactured by high quality Mos and IC imported . Keep your battery long cycle serivce life time.
Advantage
∈Use top quality (A-level) protective integrated circuit IC
∈Strong load ability, constant discharge current 80A 100A 120A 150A 200A 500A, use high voltage resistance, low inner resistance power Mosfet. The heat sink will greatly help cooling.
∈IC itself has power balancing function. The circuit is simple and reliable.
∈Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won’t affect the PCB and the battery.Temperature protection during charging and discharging.
∈Extreme low power consumption. The consumption of the whole device is less than 50uA.
∈PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.
Package Included
1 x Waterproof 3.2V LiFePo4 8S 24V Battery Protection Board
Weight | 0.12 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.