Assembled 16 Level Sound Control Level indicator Blue LED Mono VU Meter Audio Music Spectrum Board AGC for MP3 Speaker Amplifiers DIY
$72.16
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Microphone signal acquisition, added noise cancellation function + automatic gain control. Practical effect is better.
Tips
1. The power supply voltage must be 5V. Do not exceed 5V. Otherwise, the lamp board will be damaged.
2. Power supplies with currents greater than 150MA (0.15A) can be used, no matter how large. All right,
3. Some power supplies have fast charge high voltage output function, please do not use this type of charger.
4. The product does not have a power supply, no power cord.
How to use
Sound Control Level indicator operating instructions
Featrues
By micophone pickup (Sound Control)
Aluminum alloy integrated molding housing 181×16 x 18.5 mm.
Mono 16 segment square lights to ensure adequate dynamic range and shock enough.
Exclusive custom square rounded lights strip. (There are no similar lights in the market).
The rising speed and the falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.
The brightness of the lamp can be adjusted freely. Microphone sensitivity can be adjusted 15 levels.
The reaction speed of AGC can be adjusted 15 levels.
super wide range of AGC adaptive algorithm to ensure the best effect.. Single button operation.
Exclusive Software – the function of eliminating ambient noise . Specific operation:(There are LED instructions operating time)
Normal mode
1. 1 second – Mode switch (there will be a corresponding preview).
2. 5 seconds – Enter the speed setting mode.
3. 10 seconds – Factory default
4. Double Click – The function of eliminating ambient noise is turned off.
5.Three Click – The function of eliminating ambient noise is turned on.
After keeping quiet, the recognition was completed in a few seconds.
6. Four Click – Enter sensitivity setting mode(15 optional)
7. Five Click – Enter the AGC speed setting mode(15 optional)
8. Six Click – Adjust the brightness of the light bar,low/medium/high
Speed setting mode:(In normal mode, press the button for 5 seconds to enter, press the button for 5 seconds to exit) .
1. 1 second
a. The rising speed of the light bar (15 optional)
b. The falling speed of the light bar (15 optional)
c. The holding time of the peak (15 optional)
d. The falling speed of the peak (15 optional)
e. Brightness adjustment (15 optional)
Loop in these functions.
2. Click the button – Loop to change the parameters set.
I. Environmental noise can be eliminated:(In normal mode ,three-click button opens and automatically exits after recognition)
(Special description:Evey environment has different environmental noise,Because it’s the microphone that picks up the sound,and the microphone can’t recognize noise or music,So we need to eliminate environmental noise. Then the sound reflected by the level lamp is the real sound of music. Before making this correction,make sure you don’t play music or talk ,the whole process will be completed in 5 seconds,so that the current environmental noise can be recognized.It is suggested that correction should be made once for every change of environment.)
Sensitivity setting mode:(In normal mode, Four Click to enter,No click 5 seconds to exit.)
1. Single -Click – Sensitivity is reduced(The more lights light on the indicator ,The sensitivity will getting more lower (15 optional)).
2. Double-Click – Sensitivity increases(The less lights light on the indicator , The sensitivity will getting more higher (15 optional)).
NOTE
In order to achieve the best effect,it is suggested to lower the sensitivity when the signal amplitude is large,and in the case of small signal,the sensitivity can be increased.
AGC Speed Mode:(In normal mode, Five Click to enter,No click 5 seconds to exit.)
1. Single -Click – AGC speed reduced (The more lights light on the indicator,
The AGC speed will getting more slower(15 optional)).
2. Double-Click – AGC speed increases(The less lights light on the indicator,
The AGC speed will getting more faster (15 optional)).
NOTE
The principle of AGC is to enlarge the input small signal to full screen display, reduce the large signal to the range that the screen can display, and automatically scale the signal according to the size of the input signal.
The speed of the AGC is the speed at which the small signal is amplified to the full screen display. Because the input signal exceeds the display area, it will be compressed immediately. If it is used in an environment where the signal amplitude varies greatly, it is recommended that the AGC speed be adjusted to faster.)
Package included
1 x assembled 16 Level Sound Control Level Indicator
Weight | 0.119 kg |
---|
Customers Also Viewed
3W 6V 145*145*3mm 520MA Mini Epoxy Solar Panel
$14.58Smart Robot & Solar PanelAdd to cartFeaturesEpoxy resin with high transmittance quality, hardness is 80, the surface scratches can not be avoided, but does not affect the workingUnique technology makes assembly solid and beauty can anti-snow, easy to installWithin the framework of specific techniques to avoid water freezing and deformationDescriptionsOperating voltage:6VCurrent:520MADimension:145 x 145 x 3 mmPackage included1 x 3W 6V Epoxy …
Portable Electric Drill Driver Pump Diesel Oil Fluid Water Hand Self-priming Pump
$36.44Electrical Pump & ValveAdd to cartLarge Flow Hand Drill Pump, Micro Dc, Small Water Pump, Aquarium, Water Pump, Hand Drill, Diesel PumpDescription1.Exquisite workmanship, small size, light weight.Easy to install and simple to use. No batteries needed.2.High flow, the flow Rate is 1800 (m³/h),stable performance and high efficiency.3.Fit all drill chucks, you can get a pump with a electric drill.4.Exquisite workmanship, …
Portable Electric Drill Driver Pump Diesel Oil Fluid Water Hand Self-priming PumpRead More
3pcs SRX882 433MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$10.41Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
3pcs SRX882 433MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
20pcs 1000uF 25V Radial Electrolytic Capacitor 10 x 17mm 105C
$6.55Electronic Accessories & SuppliesAdd to cartDescription1. Color:As pictures2. Structure:Fixed capacitors3. Kinds:Aluminum Electrolytic Capacitors4. Size:L x Dia / 17 x 10mm / 0.66 x 0.39inch5. Capacitance:1000UF6. Voltage:25V7. Quantity:20pcsPackage include20 x Electrolytic capacitor
6pcs RX24 5W 100R 100RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$11.00Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
10cm M5Stack RGB LEDs Cable SK6812 with GROVE Port LED Strip Light
$11.91Other Module BoardAdd to cartDescriptionRGB LED is a extendable strip light with RGB LED lined on. Just if you haven’t heard about RGB LED yet, RGB LED features digitally addressable LEDs,which means each led can display RGB color and brightness individually. It is very easy to program by Single-BUS with simple protocol. Another feature is the extension and flexiblulity.You …
10cm M5Stack RGB LEDs Cable SK6812 with GROVE Port LED Strip LightRead More
XY-P15W 12V/24V High Power Digital Amplifier Module 10W/15W/20W/30W/40W Stereo Bluetooth Power Amplifier Board
$14.40Amplifier BoardAdd to cartDescriptionXY-P15W is a high-power stereo Bluetooth audio module.Dual channels audio signal output.Built-in amplifier module therefore it can connect to loudspeaker directly.It is ideal for DIY wireless Bluetooth speakers and transponders.Features1. Width work voltage range2. Applicable multiple type speakers3. Knob adjustment4. Support reverse connection protection5. Support short circuit protection6. Self-recovery overheat protectionParameters1. Product name:XY-P15W Stereo Bluetooth …
Reviews
There are no reviews yet.