BESTEP 6 Channel 5V Relay Module High And Low Level Trigger
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Maximum load:AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage is 5V.
Each channel of the module can be set up by high jumper or low level trigger.
Fault tolerant design, even if the control line is broken, the relay will not act.
Power indicator (green), 6 relay status indicator (red).
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:108mm x 50mm x 18.6mm (length x width x height).
There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm.
Module interface
1. DC+:Connect the power positive pole
2. DC-:Connect the power negative pole.
3. IN1-IN6:According to the setting of each way, the corresponding relay-operating can be controlled by high or low level.
Relay output:there is a 18 wire interface, all interfaces can be directly connected to lead to facilitate user use.
1. NO1–NO6:Relay normal open, the relay suspends before pulling in, and then short-connect with the COM.
2. COM1–COM6:Relay common interface
3. NC1–NC6:Relay normal close, short connected with COM before pulling inand suspended after pulling in.
High and low level trigger option
1. S1-S6 is the high level trigger selection of relay 1 Channel – 6 Channel.
2. When COM is short connected with LOW, the corresponding relay is LOW level trigger, while when COM is short connected with high end is high level trigger.
Package Included
1 x 6 Channel 5V Relay Module
Weight | 0.094 kg |
---|
Customers Also Viewed
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module for
$18.58Sensor & Detector ModuleAdd to cartFeatureAdxl345 digital three-axis acceleration of gravity tilt module Ar code iic / spiName:three-axis acceleration of gravity moduleChip:the adxl345Power supply:3-5VCommunication:the IIC / SPI communication protocolMeasuring range:± 2g ± 16gSchematics, manuals and reference documentation of relevant data51, the avr, the Ar microcontroller test code3-axis, ± 2g / ± 4g / ± 8g / ± 16gPackage includes5 x …
5Pcs GY-291 ADXL345 3-Axis Tilt Digital Gravity Acceleration Sensor Module forRead More
10pcs DC-DC 5-32V to 0.8-30V Power Supply Step Down Module Adjustable Buck Regulator 5A Constant LED Driver Battery Charging Voltage Board
$47.05Power Supply ModuleAdd to cartOverviewThe module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI’s op-amp control output current, making the overall output very stable.This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV!FeaturesModule nature:non-isolated buck moduleRectification mode:asynchronous rectificationWiring port:Input mode:IN+ input positive, IN- input negativeOutput mode:OUT+ output positive, …
5pcs 2 in 1 8W 3-24V to 24V Boost-Buck Dual Voltage Power Supply Module for ADC DAC LCD OP-AMP Speaker
$43.70Power Supply ModuleAdd to cartDescriptionInput voltage:3~24V, output:±24VMaximum output power:1-8W (For details, please see the description at the bottom or ask us for information.)Conversion efficiency:70-90%Quiescent current:3-4mAAccuracy:Positive voltage ±3%, Negative voltage ±5%8W DC-DC Boost-Buck Converter working frequency:400KHZ. Operating ambient temperature:-40~+85 Degrees CelsiusSize:42 x 24 x 15mmWeight:10gFeatureHigh efficiency up to 90%Built-in Frequency CompensationBuilt-in Soft-Start FunctionBuilt-in Thermal Shutdown FunctionBuilt-in Current Limit FunctionNote1. In …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-Higrow
$9.06Sensor & Detector ModuleAdd to cartGithub Link:Click here to openProducts that can be used withT-WATCH SeriesT-Watch Upgraded Version Black Product ID 1551855 T-Watch Upgraded Version White Product ID 1551854 T-Watch Basic Version Product ID 1501125 T-Watch Basic Version with Silicone Shell Product ID 1722494 TTV:Product ID 1777327 T-Higrow:Product ID IntroductionThe LILYGO T-FH interface sensor is the abbreviation of female header. …
LILYGO T-FH Female Header interface Gesture Sensor Module I2C for T-WATCH TTV T-HigrowRead More
10pairs MC4 Connector+1pair Spanner Male Female 30A Cable Plug MC4 Connector Solar Panel Branch Series Connect Solar System
$28.42Electronic Accessories & SuppliesAdd to cartDescriptionItem no:MC4Rated voltage:1000 VRated impulse voltage:1000 VRated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉Test voltage:6 kV (50 Hz)Protection grade:IP67Insulation material:PC/PAContact material:Copper, silver-platedOperating temperature:-40°C ~ +90°CSafety class:IIFlame class:UL94-V0Contact resistance:≤5mΩInsertion / Withdrawal force:≤50N / ≥50NSuitable for cables:10, 12, 14 AWG (2.5mm2/4mm2/6mm2😉Locking system:Snap-inPackage included10pairs x MC4 Connectors1pair x MC4 Spanner
10Pcs 1 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$12.56Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:23*20mmPackage Included10 x 1 Key Press Film Switch
Reviews
There are no reviews yet.