BESTEP 8 Channel 12V Relay Module High And Low Level Trigger
$17.46
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Maximum load:AC 250V/10A, DC 30V/10A.
The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.
Working voltage is 12V.
Each channel of the module can be set up by high jumper or low level trigger.
Fault tolerant design, even if the control line is broken, the relay will not act.
Power indicator (green), 8 relay status indicator (red).
The interface design is humanized, all interfaces can be directly connected through the terminals, so it is very convenient.
Module size:142mm x 50mm x 18.5mm (length x width x height).
There are 4 fixed bolt holes, holes 3.1mm, spacing 67mm x 44.5mm.
Module interface
1. DC+:Connect the power positive pole
2. DC-:Connect the power negative pole.
3. IN1-IN8:According to the setting of each way, the corresponding relay-operating can be controlled by high or low level.
Relay output:there is a 24 wire interface, all interfaces can be directly connected to lead to facilitate user use.
1. NO1–NO8:Relay normal open, the relay suspends before pulling in, and then short-connect with the COM.
2. COM1–COM8:Relay common interface
3. NC1–NC8:Relay normal close, short connected with COM before pulling inand suspended after pulling in.
High and low level trigger option
1. S1-S8 is the high level trigger selection of relay 1 Channel – 8 Channel.
2. When COM is short connected with LOW, the corresponding relay is LOW level trigger, while when COM is short connected with high end is high level trigger.
Package Included
1 x 8 Channel 12V Relay Module
Weight | 0.115 kg |
---|
Customers Also Viewed
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced Balance
$56.85RF amplifierAdd to cartThe main parameters1. The transformation ratio is 1:22. Input impedance:50 ohms (unbalanced)3. Output impedance:100 ohms (balance) suitable for QUAD ANT antenna4. Frequency range:1-56MHz5. Standing wave:less than 1.56. Power resistance:500w7. Dimensions:outer diameter 50x130mm8. Weight:350 grams9. Comes with epoxy resin plate and 304 stainless steel lifting ring, with two copper noses for connecting the vibrator, convenient for …
1:2 1-56MHz 200W Balun HAM Shortwave Antenna Balun 50 ohm to 100 ohm Unbalanced BalanceRead More
5 Pcs 2.54mm 20 Pins IC Socket Wide DIP Sockets Adapter Solder Type
$3.55Module ComponentsAdd to cartSpecificationColor:blackQuantity:5 pcsNumber of pins:20 Pins (10pins / row x 2 rows)Pin length:2.9mmPitch:2.54mmRow to row distance:7.62mmDimension:25 x 10 x 8mm (L x W x H)Contact termination through holeContact type dual wipe contactPackage included5 x 20 Pins IC Sockets
1Hz-150Khz 3.3V-30V Signal Generator PWM Pulse Frequency Duty Cycle Adjustable Module LCD Display
$22.06Other Module BoardAdd to cartParameter settingsThe module has four independent keys, used to set the frequency and duty cycle, support short press (increase or decrease a unit)and long press (fast increase or decrease), very simple, set the parameters automatically save, power failure Lost.Module parameters1. Working voltage:3.3 ~ 30V;2. Frequency range:1Hz ~ 150KHz;3. Frequency accuracy:the accuracy in each range is …
4 Slots 18650 Battery Holder Plastic Case Storage Box for 4*3.7V 18650 Lithium Battery with 8Pin
$6.55Module ComponentsAdd to cartSpecificationsSupport Model:18650 BatteryShell material:ABS fire, flame retardant, high temperature, color diversity and other materials for choice.Metal spring:carbon steel nickel plating by NCAA salt spray test, stainless steel spring.External:wire, welding pieces, pins, male and female buckle (3.7v button)Terminal:copper nickel platingCorn:nickel plated with coppervPackage Included1 x 4 Slots 18650 Battery Holder Plastic Case Storage Box
Reviews
There are no reviews yet.